SuccessThanks! That's very helpful

Rake tedder Sonechko GSM6 (1T) for walk-behind tractor, motor tractor (spoke 6 mm)

15,100 ₴
Collecting technique for hay, feed
Yesterday 12:31
Україна
Дніпро Get directions →
вул. Тітова, 26
4 views
Published 15 hours ago by AGROZIP
15,100 ₴
вул. Тітова, 26, Дніпро, Україна
Get directions →
4 item views

Rake tedder Sonechko GSM6 (1T) for walk-behind tractor, motor tractor (spoke 6 mm) are used for mechanized collection of dried plant mass on medium and large areas. They perform high-quality raking of finished hay forming loose windrows, tedding and turning of fully dried grass. In a single pass they process an area 270 cm wide.
Working units - two pairs of raking wheels, mounted on subframes made of round steel tubes, installed on a common subframe with hinged connections. The wheels are equipped with steel resilient teeth (diameter 4 mm) of bent shape and are positioned with partial overlap of each other’s working zones. Wheel discs are mounted on hubs with sealed bearings, providing smooth rotation of the raking elements. Due to the sequential arrangement of the wheels and resilient spokes, the rake tedder Sonechko GSM6 (1T) for walk-behind tractor, motor tractor (spoke 6 mm) collects finished plant material with minimal losses, without damaging the soil and regrown grass.
The rake tedder Sonechko GSM6 (1T) for walk-behind tractor, motor tractor (spoke 6 mm) is attached using a single-point mounting system, reinforced with welded angles and steel plates. The overall L-shaped frame is equipped with a special damping device - two shock-absorbing springs that allow precise copying of the working surface profile, preventing undesirable breakages of the unit in case of running into various hard obstacles. When changing the angle of the wheels relative to the direction of travel, the raking function changes to a tedding function.
Advantages of the rake tedders Sonechko GSM6 (1T) for walk-behind tractor, motor tractor (spoke 6 mm):

Four raking wheels.
Two subframes made of round steel tubes.
Presence of a damping device.
Hubs with sealed bearings.

Required power of the towing vehicle, hp: from 8
Wheel diameter by spoke, mm: 900
Towing vehicle: walk-behind tractor, motor tractor
Working width, m: 2.7

Read more

Published on 2026/10/11

Description

Rake tedder Sonechko GSM6 (1T) for walk-behind tractor, motor tractor (spoke 6 mm) are used for mechanized collection of dried plant mass on medium and large areas. They perform high-quality raking of finished hay forming loose windrows, tedding and turning of fully dried grass. In a single pass they process an area 270 cm wide.
Working units - two pairs of raking wheels, mounted on subframes made of round steel tubes, installed on a common subframe with hinged connections. The wheels are equipped with steel resilient teeth (diameter 4 mm) of bent shape and are positioned with partial overlap of each other’s working zones. Wheel discs are mounted on hubs with sealed bearings, providing smooth rotation of the raking elements. Due to the sequential arrangement of the wheels and resilient spokes, the rake tedder Sonechko GSM6 (1T) for walk-behind tractor, motor tractor (spoke 6 mm) collects finished plant material with minimal losses, without damaging the soil and regrown grass.
The rake tedder Sonechko GSM6 (1T) for walk-behind tractor, motor tractor (spoke 6 mm) is attached using a single-point mounting system, reinforced with welded angles and steel plates. The overall L-shaped frame is equipped with a special damping device - two shock-absorbing springs that allow precise copying of the working surface profile, preventing undesirable breakages of the unit in case of running into various hard obstacles. When changing the angle of the wheels relative to the direction of travel, the raking function changes to a tedding function.
Advantages of the rake tedders Sonechko GSM6 (1T) for walk-behind tractor, motor tractor (spoke 6 mm):

Four raking wheels.
Two subframes made of round steel tubes.
Presence of a damping device.
Hubs with sealed bearings.

Required power of the towing vehicle, hp: from 8
Wheel diameter by spoke, mm: 900
Towing vehicle: walk-behind tractor, motor tractor
Working width, m: 2.7

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 438 active listings
  • Company
  • Registered for Yesterday
  • Дніпро, Дніпропетровська область, Україна
Recently viewed
ДТЗ ДТЗ Yesterday 12:56
Pro Tractors Дніпро Yesterday 12:56
Tractor HORST A 404DXU
338,250 ₴
Tractor HORST A 404DXU
Дніпро, Україна
TRACTOR HORST A 404DXU: FORTY HORSES UNDER THE HOOD — ALL THE WORK LATER! When old equipment is already barely breathing, the work doesn't get any less, and weather and prices constantly test your resilience, there’s no extra money for experiments, but standing still is not an option either — it’s the perfect time to switch to the Horst A 404DXU tractor, whi...
Yesterday Tractors вул. Надії Алексєєнко, 70
338,250 ₴
AGROZIP AGROZIP Yesterday 12:31
Pro Soil treatment Дніпро Yesterday 12:31
3-body hiller cultivator OT-3 for mini tractor
6,800 ₴
3-body hiller cultivator OT-3 for mini tractor
Дніпро, Україна
Purpose: Hillocking plants: Forming ridges around plants (potatoes, beets, etc.) to protect the root system and improve water retention. Weed control: Effective mechanical removal of weeds during hilling. Furrow formation: Used to create even furrows for planting. Construction and description: Frame: Made from 60×60×3 mm profile tube, resistant to loads and ...
Yesterday Soil treatment вул. Тітова, 26
6,800 ₴
ДТЗ ДТЗ Yesterday 12:48
Pro Tractors Дніпро Yesterday 12:48
Tractor KENTAVR 10D/1350
78,925 ₴
Tractor KENTAVR 10D/1350
Дніпро, Україна
Tractor KENTAVR 10D/1350 — a compact and reliable 4×4 for small jobs KENTAVR 10D/1350 — a small-sized tractor with a powerful single-cylinder diesel engine of 418 cm³ and 10 hp. Its 4×4 drive provides confident operation even in tight, difficult areas. This mini tractor is ideal for gardening, small farms and municipal work. Engine Equipped with a 4-stroke d...
Yesterday Tractors вул. Надії Алексєєнко, 70
78,925 ₴
AGROZIP AGROZIP Yesterday 12:31
Pro Seeders and seedlings Дніпро Yesterday 12:31
Single-row potato planter for walk-behind tractor, 30L, chain-driven (KSC30)
5,500 ₴
Single-row potato planter for walk-behind tractor, 30L, chain-driven (KSC30)
Дніпро, Україна
Single-row potato planter for walk-behind tractor, 20L, chain-driven (KSC20) attaches to power equipment with at least 4 horsepower via a single-point hitch. Designed for mechanized planting of potatoes on small plots with various soils. The unit is equipped with a cone-shaped sheet steel hopper with a capacity of 20 L; the planting mechanism is driven by a ...
Yesterday Seeders and seedlings вул. Тітова, 26
5,500 ₴
AGROZIP AGROZIP Yesterday 12:27
Pro Soil treatment Дніпро Yesterday 12:27
Single-furrow plow for heavy walk-behind tractor PL8
4,900 ₴
Single-furrow plow for heavy walk-behind tractor PL8
Дніпро, Україна
Oversized functional single-furrow plow for the heavy walk-behind tractor PL8 is designed for productive work with agricultural machinery equipped with an engine of at least 8 horsepower with a water cooling system. It has an adjustable elongated frame that represents a movable parallelogram with a shift function of the working body relative to the axis of t...
Yesterday Soil treatment вул. Тітова, 26
4,900 ₴
AGROZIP AGROZIP Yesterday 12:27
Pro Soil treatment Дніпро Yesterday 12:27
Single-body reversible plough PL4 with support wheel for motor-tractor
5,500 ₴
Single-body reversible plough PL4 with support wheel for motor-tractor
Дніпро, Україна
Lightweight maneuverable single-body plough PL4 with an adjustable hinged frame is excellent for ploughing small private plots with any soil, cleared of slabs and stones. This plough is attached to a heavy walking tractor with a water cooling system, as well as to a motor-tractor with a standard single-point hitch that has a special adjustment screw to set t...
Yesterday Soil treatment вул. Тітова, 26
5,500 ₴
AGROZIP AGROZIP Yesterday 12:31
Mower Lisicki (Lysychky) for mini tractor rotary Polish Z-178-1-1 (1.1 meters)
41,178 ₴
Mower Lisicki (Lysychky) for mini tractor rotary Polish Z-178-1-1 (1.1 meters)
Дніпро, Україна
Mower Lisicki (Lysychky) for mini tractor rotary Polish Z-178-1-1 (1.1 meter) - productive specialized equipment designed for mowing meadow and sown vegetation, cereals and forage crops of any density. It features a reliable construction calculated for heavy operational volumes. In one pass it covers a strip 1.1 meters wide, cutting vegetation at a height of...
Yesterday Collecting technique for hay, feed вул. Тітова, 26
41,178 ₴
AGROZIP AGROZIP Yesterday 12:27
Vibratory Poltava potato digger two-eccentric for mini tractor single-row KK21
17,600 ₴
Vibratory Poltava potato digger two-eccentric for mini tractor single-row KK21
Дніпро, Україна
Updated efficient model - single-row vibratory Poltava potato digger for mini tractor KK21 (KK21) is equipped with two eccentrics that separately drive the shaker and the vibro-knife. This allows digging root crops as productively as possible, achieving productivity up to 0.5 hectares per hour on a plot of 2 ha.This potato digger attaches to mini tractors wi...
Yesterday Machines to harvest and process potatoes вул. Тітова, 26
17,600 ₴
Call