This site uses cookies to ensure proper operation, personalization, analytics, and advertising. You can accept all cookies, decline non-essential cookies, or customize your settings. Learn more in our Privacy Policy.
Always active
Essential for core functionality, security, and authentication. Always active.
Remember your selected language, location preferences, and display options.
Help us measure traffic and user interactions to improve the site (Google Analytics).
Used to display relevant advertising and measure campaign performance (Google Ads).
Bearing 7607 (32307) SKF-UA is a single-row tapered roller bearing designed to simultaneously accommodate radial and axial loads in one direction. The tapered rollers provide reliable bearing operation under significant loads.
The bearing consists of an inner ring, a cage with tapered rollers, and an outer ring. When two bearings are installed in pairs, the axial clearance can be adjusted and preload can be used.
7607 (32307) is suitable for use in agricultural machinery, mechanisms, and other assemblies where high resistance to radial and axial loads is required.
Bearing 7607 (32307) SKF-UA is a single-row tapered roller bearing designed to simultaneously accommodate radial and axial loads in one direction. The tapered rollers provide reliable bearing operation under significant loads.
The bearing consists of an inner ring, a cage with tapered rollers, and an outer ring. When two bearings are installed in pairs, the axial clearance can be adjusted and preload can be used.
7607 (32307) is suitable for use in agricultural machinery, mechanisms, and other assemblies where high resistance to radial and axial loads is required.
Attributes
Related listings in your area
How far is it?Show listings in my area
Show only listings that arekm distancedShow listings
Диск 650 мм АГ 2.1.01-02 (6в.) для дискової борони АГ, АГП, УДА, ДДР встановлюється за допомогою осі та кріпильних метизів на стійку дискових агрегатів. Особливості конструкції: - Матеріал: Диск виготовлений із високоякісної сталі, що забезпечує йому високу зносостійкість і довговічність. Використання спеціальних сталей дозволяє диску витримувати значні меха...
Характеристика тяги КІС09.00.602Б-02 виготовлена з круглого прутка діаметром 16 мм ГОСТ 7417-75 сталь 45В ГОСТ 1051-73, довжина тяги 120 мм, різьблення М16 завдовжки 90 мм, один кінець сплющений методом кування, в ньому просвердлено отвір д=10мм.
Стійка лапи виготовлена зі смуги товщиною 16 мм та шириною 45 мм зі сталі 45; лапи стрілчасті виготовлені з листа товщиною 6 мм із сталі 65Г; ширина лапи 270мм.
Пружина стійки культиватора КН 2, 8.00.28 основна частина вузла «Пружинний блок стійки культиватора КН у зборі», встановлюється у верхній частині стійки культиватора КН, приєднується до рами культиватора, служить для захисту робочого органу (стрілчастої лапи культиватора КН) від пошкодження при наїзді на перешкоду в ґрунті (камінів, металу, уламків бетонних ...
Втулка кріплення вузла пружин культиватора КН 2,8.02.62 Частина кріплення вузла «Пружинний блок стійки культиватора КН у зборі КН2,8.02.60.27», встановлюється на вісь повороту пружинного блоку у верхній частині стійки лапи КН, служить для забезпечення безлюфтових поворотно-поступальних коливань стійки лапи при роботі культиватора. Характеристика втулки культ...
Труба граблини культиватора навісного КН 3,8.03.01 Виготовлена з труби із зовнішнім діаметром 57 мм, товщиною стінки 5 мм, із сталі В20 ГОСТ 8731-87, довжиною 1820 мм. На трубі розташовано 11 наскрізних отворів діаметром 11 мм із кроком між ними 173 мм.
Гребінка для культиватора КН-2.8 та КН-3.8 Призначення: допоміжний робочий орган культиватора КН, встановлюється на трубі грабліни, завдяки пружинному гребінці служить для додаткового подрібнення ґрунту при роботі культиватора, а також для вичісування ниток бур’янів з обробленого шару ґрунту та пригладжування його. Характеристики гребінки культиватора навісн...
Петля тримання гребінки культиватора КН (КН 2,8.03.03) Частина виробу «Культиватор навісний КН-2,8 або культиватора навісного КН-3,8», встановлюється у вузлі «Грабліна КН у зборі», служить для утримання гребінки КН 2,8.03.02 при її встановленні на трубу граблі культиваторів в процесі складання готовий вузол та знаходження зазначеної труби під час роботи куль...
Втулка кронштейн рами культиватора КН 2,8 та КН 3,8 (КН2,8.03.12) Призначення: частина кріплення вузла “Труба грабліни” культиватора КН, встановлюється в кронштейн рами культиватора, служить для забезпечення щільного обхвату кронштейном згаданої труби грабліни для попередження випадання її в роботі культиватора при ослаблення металовиробів. Характеристика вт...
Bearing 7509A (32210) SKF 45×85×24.75 mm | Buy Bearing 7509A (32210) SKF 45×85×24.75 mm Bearing 7509A (32210) BT1-0654 SKF (Ukraine) is a tapered roller bearing designed to operate under combined radial and axial loads. Thanks to the roller design, the bearing has high load capacity, stiffness, and resistance to misalignment and shaft deflection. The bearing...
Tractor KENTAVR 404SC — a powerful diesel 4×4 with a comfortable cab KENTAVR 404SC — is a versatile diesel tractor with 40 hp and full 4×4 drive, combining performance, reliability and operator comfort. Engine Equipped with a 4-cylinder diesel engine JDM490T3 with a displacement of 2545 cm³ and a rated power of 40 hp. Starting system — electric starter with ...
Bearing 3609 45×100×36 mm | Spherical roller Bearing 3609 45×100×36 mm Bearing 3609 is a double-row spherical roller bearing with high load capacity and the ability to compensate shaft misalignment up to 2–3°. The primary load is radial; the bearing also takes axial loads in both directions. Thanks to its robust design, the bearing is resistant to impact loa...
The 7510A bearing is a single-row roller thrust-radial bearing with cylindrical rollers, manufactured in accordance with GOST 27365-2023. The bearing design allows it to effectively take large axial loads in one direction as well as radial loads, making it ideal for operation under intensive service conditions. Technical specifications: - Inner diameter (d):...
Bearing 2007109A (32009) 45×75×20 mm | Buy Bearing 2007109A (32009) 45×75×20 mm Bearing 2007109A (32009) is a single-row tapered roller radial-thrust bearing with a separable design. It is intended to simultaneously take radial and axial loads, with the axial load taken in one direction. The design allows the inner and outer rings to be installed separately,...
# Bearing 6207-ZZ 35×72×17 mm with protective shields **Single-row radial ball bearing 6207-ZZ** with protective shields is designed to operate with radial and axial loads in both directions. Thanks to a low coefficient of friction, the bearing provides smooth rotation, low noise and vibration levels, and can also operate at high rotational speeds. The prote...
The 7205A bearing is a single-row tapered roller bearing. This type of bearing is designed to take radial and axial loads (mainly axial in one direction), and is ideal for applications under high loads and speeds. Technical specifications: - Inner diameter (d): 25 mm - Outer diameter (D): 52 mm - Width (B): 16.25 mm - Type: Roller, single-row, tapered - Desi...