Bearing UCFB 206
282 ₴
Spare parts
Yesterday 12:48
Україна
Біла Церква Get directions →
бульвар М. Грушевського, 13
6 views
Published 12 hours ago by БІЛОЦЕРКІВМАЗ
282 ₴
In Spare parts category
бульвар М. Грушевського, 13, Біла Церква, Україна
Get directions →
6 item views
Bearing assembly UCFB 206 (d=30 mm) flanged
Product description:
The UCFB 206 bearing assembly is a reliable flanged unit in a cast iron housing with three mounting holes. The assembly consists of a self-aligning ball bearing UC 206 and a housing FB 206. Thanks to the specific shape of the flange, this unit is ideally suited for mounting on side vertical surfaces, providing high shaft fixation rigidity when mounting space is limited.
Applications:
Agricultural machinery: grain cleaning machines, elevators, seeders and small conveyors.
Food industry: bottling lines, sorting tables, packaging equipment.
Woodworking industry: roller systems and feed units of machines.
Technical specifications :
Inner diameter (d): 30 mm
Housing type: FB 206 (flanged, 3 holes)
Bearing type: UC 206 (self-aligning)
Total length (w): 130 mm
Distance between mounting centers (k): 65 mm
Bolt size: M8
Bearing width (B): 38.1 mm
Weight: 0.950 kg
Advantages of this unit:
Misalignment compensation: The bearing's spherical outer ring allows small shaft misalignments to be leveled.
Enhanced protection: The bearing is equipped with seals that prevent abrasive dust and moisture from entering the rolling area.
Service convenience: The housing is equipped with a grease fitting (zerk fitting), allowing easy addition of lubricant during operation.
Compactness: Three-point mounting provides reliable fixation where a standard square flange (4 holes) does not fit due to dimensions.
Read morePublished on 2026/10/11
Description
Bearing assembly UCFB 206 (d=30 mm) flanged
Product description:
The UCFB 206 bearing assembly is a reliable flanged unit in a cast iron housing with three mounting holes. The assembly consists of a self-aligning ball bearing UC 206 and a housing FB 206. Thanks to the specific shape of the flange, this unit is ideally suited for mounting on side vertical surfaces, providing high shaft fixation rigidity when mounting space is limited.
Applications:
Agricultural machinery: grain cleaning machines, elevators, seeders and small conveyors.
Food industry: bottling lines, sorting tables, packaging equipment.
Woodworking industry: roller systems and feed units of machines.
Technical specifications :
Inner diameter (d): 30 mm
Housing type: FB 206 (flanged, 3 holes)
Bearing type: UC 206 (self-aligning)
Total length (w): 130 mm
Distance between mounting centers (k): 65 mm
Bolt size: M8
Bearing width (B): 38.1 mm
Weight: 0.950 kg
Advantages of this unit:
Misalignment compensation: The bearing's spherical outer ring allows small shaft misalignments to be leveled.
Enhanced protection: The bearing is equipped with seals that prevent abrasive dust and moisture from entering the rolling area.
Service convenience: The housing is equipped with a grease fitting (zerk fitting), allowing easy addition of lubricant during operation.
Compactness: Three-point mounting provides reliable fixation where a standard square flange (4 holes) does not fit due to dimensions.
Attributes
Related listings in your area
How far is it?
Show listings in my area
Show only listings that are
km distanced
Show listings
Contact the seller
User is offline
- 592 active listings
- Company
- Registered for Yesterday
- Біла Церква, Київська область, Україна
Related items
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Кришка 105.003.014-16
423 ₴
Кришка 105.003.014-16
Біла Церква, Україна
Кришка 105.003.014-16
Yesterday
Spare parts
бульвар М. Грушевського, 13
423 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Кришка 105.003.017-01
456 ₴
Кришка 105.003.017-01
Біла Церква, Україна
Кришка 105.003.017-01
Yesterday
Spare parts
бульвар М. Грушевського, 13
456 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Корпус шнека 105.012.241
720 ₴
Корпус шнека 105.012.241
Біла Церква, Україна
Корпус шнека 105.012.241
Yesterday
Spare parts
бульвар М. Грушевського, 13
720 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Зірочка 105.017.12.007
840 ₴
Зірочка 105.017.12.007
Біла Церква, Україна
Зірочка 105.017.12.007
Yesterday
Spare parts
бульвар М. Грушевського, 13
840 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Кришка колісного ходу 105.043.07.011
138 ₴
Кришка колісного ходу 105.043.07.011
Біла Церква, Україна
Кришка маточини колісного ходу 105.043.07.011 дискових борін АГП, УДА, ДІЧ, ГР, комбайнів КРП-2,0, КПФ-2,4 Призначена для встановлюється на маточинах коліс колісних ходів причіпних і напівпричіпних сільгоспмашин (ґрунтообробних агрегатів АГП, УДА, ДІЧ, ГР, комбайнів КРП-2,0, КПФ-2,4), слугує для захисту підшипників маточини від потрапляння всередину маточини...
Yesterday
Spare parts
бульвар М. Грушевського, 13
138 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Диск ромашка 650 мм на 8 отв.
1,980 ₴
Диск ромашка 650 мм на 8 отв.
Біла Церква, Україна
Диск ромашка 650 мм на 8 отв.
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,980 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Disk AG2.1.01-01 D 510mm 8 holes
1,500 ₴
Disk AG2.1.01-01 D 510mm 8 holes
Біла Церква, Україна
Disk AG2.1.01-01 D 510mm 8 holes
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,500 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Disk AG2.1.01-02 650 mm (6 holes)
1,980 ₴
Disk AG2.1.01-02 650 mm (6 holes)
Біла Церква, Україна
Disk 650 mm AG 2.1.01-02 (6 h.) for the AG, AGP, UDA, DDR disc harrow is mounted by means of an axle and fastening hardware to the disc unit arm. Design features: -Material: The disk is made of high-quality steel, providing high wear resistance and durability. The use of special steels allows the disk to withstand significant mechanical loads and aggressive ...
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,980 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Chamomile disc DMT-653
1,980 ₴
Chamomile disc DMT-653
Біла Церква, Україна
Chamomile disc DMT-653
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,980 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Drawbar spring of cultivator KN KIS 09.00.602B-02
147 ₴
Drawbar spring of cultivator KN KIS 09.00.602B-02
Біла Церква, Україна
Specification of drawbar KIS09.00.602B-02 manufactured from round rod 16 mm diameter GOST 7417-75 steel 45V GOST 1051-73, drawbar length 120 mm, thread M16 with length 90 mm, one end flattened by forging method, a hole ø10 mm drilled in it.
Yesterday
Spare parts
бульвар М. Грушевського, 13
147 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Paw Stand KN 2,8.00.09
726 ₴
Paw Stand KN 2,8.00.09
Біла Церква, Україна
The paw stand is made from a strip 16 mm thick and 45 mm wide from steel 45; arrow-shaped paws are made from sheet 6 mm thick from steel 65G; paw width 270 mm.
Yesterday
Spare parts
бульвар М. Грушевського, 13
726 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Spring KN 2,8.00.28 of cultivator shank
387 ₴
Spring KN 2,8.00.28 of cultivator shank
Біла Церква, Україна
Spring of cultivator shank KN 2, 8.00.28 the main part of the assembly "Spring block of the cultivator shank KN assembled", installed in the upper part of the cultivator shank KN, attached to the cultivator frame, serves to protect the working tool (the cultivator KN sweep point) from damage when driving over an obstacle in the soil (stones, metal, fragments...
Yesterday
Spare parts
бульвар М. Грушевського, 13
387 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Bed frame KN 2,8.02.60
2,073 ₴
Bed frame KN 2,8.02.60
Біла Церква, Україна
Bed frame KN 2,8.02.60
Yesterday
Spare parts
бульвар М. Грушевського, 13
2,073 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Cultivator tine stand block KN 2,8.02.60.27
6,159 ₴
Cultivator tine stand block KN 2,8.02.60.27
Біла Церква, Україна
Front cultivator stand assembly with 270 mm blade
Yesterday
Spare parts
бульвар М. Грушевського, 13
6,159 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Cultivator shank assembly block KN 2,8.02.60.33
6,192 ₴
Cultivator shank assembly block KN 2,8.02.60.33
Біла Церква, Україна
Front cultivator shank assembly with 330 mm blade
Yesterday
Spare parts
бульвар М. Грушевського, 13
6,192 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Bushing KN 2,8.02.61
159 ₴
Bushing KN 2,8.02.61
Біла Церква, Україна
Bushing KN 2,8.02.61
Yesterday
Spare parts
бульвар М. Грушевського, 13
159 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Bushing for mounting the spring assembly of cultivator KN 2,8.02.62
219 ₴
Bushing for mounting the spring assembly of cultivator KN 2,8.02.62
Біла Церква, Україна
Bushing for mounting the spring assembly of cultivator KN 2,8.02.62 Part of the mounting of the "Spring block of the cultivator shank assembly KN in complete assembly KN2,8.02.60.27", installed on the pivot axis of the spring block at the upper part of the shank of the KN tine, serves to ensure backlash-free oscillating and reciprocating movements of the tin...
Yesterday
Spare parts
бульвар М. Грушевського, 13
219 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Clamp KN 2,8.02.65
159 ₴
Clamp KN 2,8.02.65
Біла Церква, Україна
Clamp KN 2,8.02.65 fastening of the crossbar to the frame
Yesterday
Spare parts
бульвар М. Грушевського, 13
159 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Grabline Tube KN 3.8.03.01
1,824 ₴
Grabline Tube KN 3.8.03.01
Біла Церква, Україна
Grabline tube for mounted cultivator KN 3.8.03.01 Manufactured from a tube with an outer diameter of 57 mm, wall thickness 5 mm, made of steel V20 GOST 8731-87, length 1820 mm. The tube has 11 through holes with a diameter of 11 mm spaced 173 mm apart.
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,824 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Cultivator tine comb KN 2.8.03.02
351 ₴
Cultivator tine comb KN 2.8.03.02
Біла Церква, Україна
Tine comb for cultivator KN-2.8 and KN-3.8 Purpose: an auxiliary working element of the KN cultivator, mounted on the rake tube; thanks to the spring tine it serves for additional soil crumbling during cultivator operation, as well as for combing out weed threads from the worked soil layer and smoothing it. Characteristics of the mounted KN cultivator tine c...
Yesterday
Spare parts
бульвар М. Грушевського, 13
351 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Cultivator Hinge KN 2.8.03.03
108 ₴
Cultivator Hinge KN 2.8.03.03
Біла Церква, Україна
Holding hinge for the comb of cultivator KN (KN 2.8.03.03) Part of the product "Mounted cultivator KN-2.8 or mounted cultivator KN-3.8", installed in the assembly "Rake KN assembled", serves to hold the comb KN 2.8.03.02 when it is mounted on the rake tube of cultivators during assembly of the finished unit and for securing the mentioned tube during cultivat...
Yesterday
Spare parts
бульвар М. Грушевського, 13
108 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Bushing for cultivator KN 2.8.03.12
240 ₴
Bushing for cultivator KN 2.8.03.12
Біла Церква, Україна
Bushing bracket of the frame for cultivator KN 2.8 and KN 3.8 (KN2.8.03.12) Purpose: a part of the fastening of the "Rake tube" assembly of the KN cultivator, installed in the bracket of the cultivator frame, serves to ensure a tight grip of the mentioned rake tube by the bracket to prevent its falling out during cultivator operation when the metal parts loo...
Yesterday
Spare parts
бульвар М. Грушевського, 13
240 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Bracket KN 2,8.03.20
1,032 ₴
Bracket KN 2,8.03.20
Біла Церква, Україна
Bracket KN 2,8.03.20
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,032 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Shaft KPI 01.262A
2,007 ₴
Shaft KPI 01.262A
Біла Церква, Україна
Shaft KPI 01.262A
Yesterday
Spare parts
бульвар М. Грушевського, 13
2,007 ₴
Recently viewed
БІЛОЦЕРКІВМАЗ
Yesterday 12:48
Bearing 208 31-UCF208
395 ₴
Bearing 208 31-UCF208
Біла Церква, Україна
The housing bearing UCF 208 (31-UCF208) is a ready-made flanged bearing unit that includes a self-aligning ball bearing UC208 and a cast iron square housing (type F) with four mounting holes. Due to its design, the unit provides easy installation, effective shaft misalignment compensation, and stable operation even in demanding conditions. Technical specific...
Yesterday
Spare parts
бульвар М. Грушевського, 13
395 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Stand KRP 02.00.02
72 ₴
Stand KRP 02.00.02
Біла Церква, Україна
Stand KRP 02.00.02
Yesterday
Spare parts
бульвар М. Грушевського, 13
72 ₴
