Snowplow Blade VM-150 for Walk-Behind Tractor

Snowplow Blade VM-150 for Walk-Behind Tractor

12,500 ₴
Road and snow harvesting machines
Today 12:29
Україна
Дніпро Get directions →
вул. Тітова, 26
6 views
Published 11 hours ago by AGROZIP
12,500 ₴
вул. Тітова, 26, Дніпро, Україна
Get directions →
6 item views

The improved snowplow blade for the VM-150 walk-behind tractor has a sturdy mounting bracket from a hay mower made of profile pipe, equipped with a hydraulic cylinder. The structure is mounted on power equipment with at least 10 horsepower and can operate both in urban and rural areas.
The blade is used on the walk-behind tractor for clearing roadways and pedestrian paths of snow and debris, leveling embankment sites, raking small-piece bulk materials, evenly distributing gravel, crushed stone or sand over a surface, and moving heavy objects around a site. The working width of 150 cm and height of 55 cm allow clearing about 5 meters of area in just two passes.
Due to the adjustable swing angle +30/0/-30, the plow blade for the walk-behind tractor can actively throw snow to the left or right side relative to the direction of travel. The steel blade is protected by a removable rubber strip that serves as a damping cutting edge. The reinforced rubber strip eases the machine’s passage over protruding road elements such as manhole covers and curbs, protecting the bucket and the cleaned surface from hard technical contaminants.
Features of the snowplow blade for the VM-150 walk-behind tractor:

Mounting mechanism with hydraulic cylinder.
Has a protective reinforced rubber strip.
Equipped with adjustable swing angle.

  • Note:

photo for illustration only!
hydraulic cylinder is not included in the price; it is calculated individually upon buyer’s request!

Compatible transport vehicle: walk-behind tractor
Weight, kg: 67
Required power of compatible transport vehicle, hp: from 10
Plow swing angle, degrees: +30 / 0 / -30
Working width, m: 1.5

Read more

Published on 2026/10/11

Description

The improved snowplow blade for the VM-150 walk-behind tractor has a sturdy mounting bracket from a hay mower made of profile pipe, equipped with a hydraulic cylinder. The structure is mounted on power equipment with at least 10 horsepower and can operate both in urban and rural areas.
The blade is used on the walk-behind tractor for clearing roadways and pedestrian paths of snow and debris, leveling embankment sites, raking small-piece bulk materials, evenly distributing gravel, crushed stone or sand over a surface, and moving heavy objects around a site. The working width of 150 cm and height of 55 cm allow clearing about 5 meters of area in just two passes.
Due to the adjustable swing angle +30/0/-30, the plow blade for the walk-behind tractor can actively throw snow to the left or right side relative to the direction of travel. The steel blade is protected by a removable rubber strip that serves as a damping cutting edge. The reinforced rubber strip eases the machine’s passage over protruding road elements such as manhole covers and curbs, protecting the bucket and the cleaned surface from hard technical contaminants.
Features of the snowplow blade for the VM-150 walk-behind tractor:

Mounting mechanism with hydraulic cylinder.
Has a protective reinforced rubber strip.
Equipped with adjustable swing angle.

  • Note:

photo for illustration only!
hydraulic cylinder is not included in the price; it is calculated individually upon buyer’s request!

Compatible transport vehicle: walk-behind tractor
Weight, kg: 67
Required power of compatible transport vehicle, hp: from 10
Plow swing angle, degrees: +30 / 0 / -30
Working width, m: 1.5

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 438 active listings
  • Company
  • Registered for Today
  • Дніпро, Дніпропетровська область, Україна
Recently viewed
AGROZIP AGROZIP Today 12:33
3-row seeder for walk-behind tractor (vegetable) SI11
16,000 ₴
3-row seeder for walk-behind tractor (vegetable) SI11
Дніпро, Україна
Power of the towing vehicle, hp: from 6Towing vehicle: walk-behind tractor, compact tractorType of coulter: wedge (furrow-forming)Seeding step in the row, mm: depending on the gear ratio installed on the metering device and the metering drum usedType of seeding mechanism: drumNumber of rows sown at once, pcs: 3Seeding depth, mm: from 10 to 60Number of coulte...
Today Seeders and seedlings вул. Тітова, 26
16,000 ₴
AGROZIP AGROZIP Today 12:26
Adapter PM1 for mower to walk-behind tractor
1,790 ₴
Adapter PM1 for mower to walk-behind tractor
Дніпро, Україна
Special device - adapter PK1 for mower to walk-behind tractor is used to connect belt-driven rotary mowers with air-cooled engines to walk-behind tractors. The adapter installed on the unit allows the mower to be conveniently attached to the power tiller at the front and to mow vegetation in the usual walk-behind-tractor position - moving forward.That is, th...
Today Collecting technique for hay, feed вул. Тітова, 26
1,790 ₴
AGROZIP AGROZIP Today 12:33
Seedling-planting machine 3-row for mini-tractor
48,000 ₴
Seedling-planting machine 3-row for mini-tractor
Дніпро, Україна
Prime mover: tractor Power of prime mover, hp: from 40 Weight, kg: 195 Seedling height, cm: 6 - 20 Depth of planting plants, cm: 25 Row spacing, cm: 50 - 115 Distance between plants in a row, cm: 20, 30, 40, 60, 120 Number of rows planted simultaneously, pcs: 3
Today Seeders and seedlings вул. Тітова, 26
48,000 ₴
ДТЗ ДТЗ Today 12:47
Сівалка СЗ-8 дискова
17,769 ₴
Сівалка СЗ-8 дискова
Дніпро, Україна
Опис сівалки СЗ-8 дискової Для полегшення трудомісткого процесу посіву мотоблок або мототрактор допоможе не тільки якісно обробити та підготувати ґрунт, але і значно прискорити процес висіву зернових та бобових культур під час використання спеціалізованої сівалки серії «СЗ». Сівалки серії «СЗ» можуть використовуватися для посіву різноманітних зернових (жито,...
Today Seeders and seedlings вул. Надії Алексєєнко, 70
17,769 ₴
Call