PoE Injectors & Splitters for Imou, Dahua, Hikvision

Free

Televisions

3 weeks

Україна

Одеська область

62 views

Published 3 weeks ago by yuriyborsuk

Free

In Televisions category

Одеська область, Україна

Get directions →

62 item views

Available: PoE injector 48V 0.5A 200 UAH PoE active splitter 48V to 12V 1.2A 170 UAH PoE passive splitter 100 UAH The price in the ad is for a passive splitter. The PoE injector 48V-0.5A is designed to supply power and data to devices that support the IEEE802.3af POE standard, such as: IP cameras, access points, WIFI signal repeaters.

The active PoE splitter 48V to 12V is a reliable and efficient device created to supply power to devices requiring 12V voltage using existing 48V PoE infrastructure. This is an excellent choice for implementing and expanding your network, ensuring the reliable and stable operation of low-power devices.

The active PoE splitter 48 to 12V is used to transmit power and data to network devices that do not support POE technology and receive power from a DC12V constant current source. The presented model provides data transmission via an RG-45 connector cable, converting POE power (maximum input voltage: 40-52V) into a 12V 1A constant current source. Data transfer rate is 10/100Mbps. Maximum power: 15.4W (IEEE802.3af)

The passive PoE splitter separates one Ethernet cable into two outputs: one for data transmission and the other for powering the device. It is used to connect equipment and video cameras without PoE support to a network where power and data go through a single cable. A passive splitter is used at the beginning of the line, combining data transmission from the router and power from the power supply into a single internet cable. At the end device, a splitter is installed which separates this stream. You get a classic RJ45 connector (for networking) and a power plug at the splitter output.

Passive kits can be used on up to 20-30m of quality cable. They transmit 12, 24V through twisted pairs in the cable from the power supply to the end device without conversion. From 25 to 100m, active kits are required. The injector + active splitter typically transmits 48V over twisted pair; a splitter is installed before the device, which converts 48V into 12V needed to connect devices.

Published on 2026/06/24

Description

Attributes

Related listings in your area

How far is it? Show listings in my area

Show only listings that are km distanced Show listings

Meet the seller