Hybrid inverter FOX H1‑6.0‑E‑G2 WiFi (6 kW, 1 phase, 2 MPPT, HV)

Hybrid inverter FOX H1‑6.0‑E‑G2 WiFi (6 kW, 1 phase, 2 MPPT, HV)

34,428 ₴
Generators
Sunday 11:54
Україна
вул. Стеценка, 14/44
14 views
Published 4 days ago by Solar-Tech
34,428 ₴
In Generators category
вул. Стеценка, 14/44, Київ, Україна
Get directions →
14 item views

FOX H1‑6.0‑E WiFi — hybrid solar inverter

FOX H1‑6.0‑E WiFi is a single‑phase hybrid inverter with a capacity of 6 kW, designed for building modern solar power systems with energy storage. It allows implementation of both off‑grid and grid‑connected solutions for private homes and commercial facilities, providing maximum efficiency in the use of solar energy.

The inverter is capable of operating in various modes:

-
as a grid‑tied inverter;

-
as a hybrid inverter with batteries;

-
as a backup power source (EPS);

-
in self‑consumption mode;

-
with feeding of excess energy into the grid;

-
and can also operate completely without a battery.

All operating modes are easily configurable via the internal menu or the monitoring system.

Operation with the external grid

FOX H1‑6.0‑E supports grid‑connected operation with feeding of excess energy into the grid. In this case, the produced solar energy is first used to cover the current consumption of the facility, then directed to charge the batteries, and the remaining surplus is fed to the external grid.

Zero export (export limitation) mode is also possible, in which the inverter regulates generation so that energy is not sent to the grid and is used only within the facility.

Operation with batteries

-
The inverter supports connection of high‑voltage lithium batteries (LiFePO4) with a voltage range of 80–480 V

-
With CAN‑interface communication, the inverter receives data from the battery BMS: state of charge, allowable currents and temperature parameters. If communication is absent, parameters can be set manually.

-
Flexible configuration of charge/discharge modes, current limiting and adaptation to daily load profiles is supported.

-
Backup power mode (EPS)

-
The inverter is equipped with a backup power (EPS) function, providing power to critical loads during external grid outage.

Switching time: less than 10 ms

Support for peak loads above nominal

This allows using it as a full UPS for home or business.

Operation with solar panels

The inverter is equipped with two independent MPPT controllers, allowing connection of two separate arrays of solar panels.

Main PV input parameters:

-
Maximum voltage: 600 V

-
MPPT operating range: 80–550 V

-
Start voltage: 75 V

-
Number of MPPTs: 2

-
Maximum PV power: up to 12 kW

This allows flexible system design with different panel orientations.

Monitoring and control

The inverter is supplied with a WiFi module (or supports its connection), which allows connection to the FoxCloud cloud monitoring system.

Using the mobile app or web interface you can:

-
monitor generation

-
control battery charge

-
analyze consumption

-
change system settings

Service functions and design

The inverter is equipped with an LCD screen for local control and system configuration.

Protection degree: IP65 — installation is possible both indoors and outdoors

Cooling: natural (passive)

Noise level: less than 35 dB

Possibility of parallel operation up to 10 inverters

Features

-
Two MPPT controllers

-
Support for high‑voltage LiFePO4 batteries

-
Operation in grid‑connected and off‑grid modes

-
Backup power mode (EPS)

-
Support for zero export

-
WiFi monitoring (FoxCloud)

-
Compact dimensions and low noise level

-
Protection degree IP65

-
Parallel operation of multiple inverters

-
Possibility of operation without a battery

Technical specifications:

DC input (photovoltaic side)

Backup, off‑grid mode

Power, W

6000

Maximum power, W

6600

Peak power for no more than 10 s, W

7200 (up to 60 s)

Output current, A

27.3

Max. output current, A

30

Max. transit current, A

≈54.5 (AC input max)

Output frequency, Hz

50/60

Grid type

1ph

Harmonic distortion coefficient, %

THD

Read more

Published on 2026/10/11

Description

FOX H1‑6.0‑E WiFi — hybrid solar inverter

FOX H1‑6.0‑E WiFi is a single‑phase hybrid inverter with a capacity of 6 kW, designed for building modern solar power systems with energy storage. It allows implementation of both off‑grid and grid‑connected solutions for private homes and commercial facilities, providing maximum efficiency in the use of solar energy.

The inverter is capable of operating in various modes:

-
as a grid‑tied inverter;

-
as a hybrid inverter with batteries;

-
as a backup power source (EPS);

-
in self‑consumption mode;

-
with feeding of excess energy into the grid;

-
and can also operate completely without a battery.

All operating modes are easily configurable via the internal menu or the monitoring system.

Operation with the external grid

FOX H1‑6.0‑E supports grid‑connected operation with feeding of excess energy into the grid. In this case, the produced solar energy is first used to cover the current consumption of the facility, then directed to charge the batteries, and the remaining surplus is fed to the external grid.

Zero export (export limitation) mode is also possible, in which the inverter regulates generation so that energy is not sent to the grid and is used only within the facility.

Operation with batteries

-
The inverter supports connection of high‑voltage lithium batteries (LiFePO4) with a voltage range of 80–480 V

-
With CAN‑interface communication, the inverter receives data from the battery BMS: state of charge, allowable currents and temperature parameters. If communication is absent, parameters can be set manually.

-
Flexible configuration of charge/discharge modes, current limiting and adaptation to daily load profiles is supported.

-
Backup power mode (EPS)

-
The inverter is equipped with a backup power (EPS) function, providing power to critical loads during external grid outage.

Switching time: less than 10 ms

Support for peak loads above nominal

This allows using it as a full UPS for home or business.

Operation with solar panels

The inverter is equipped with two independent MPPT controllers, allowing connection of two separate arrays of solar panels.

Main PV input parameters:

-
Maximum voltage: 600 V

-
MPPT operating range: 80–550 V

-
Start voltage: 75 V

-
Number of MPPTs: 2

-
Maximum PV power: up to 12 kW

This allows flexible system design with different panel orientations.

Monitoring and control

The inverter is supplied with a WiFi module (or supports its connection), which allows connection to the FoxCloud cloud monitoring system.

Using the mobile app or web interface you can:

-
monitor generation

-
control battery charge

-
analyze consumption

-
change system settings

Service functions and design

The inverter is equipped with an LCD screen for local control and system configuration.

Protection degree: IP65 — installation is possible both indoors and outdoors

Cooling: natural (passive)

Noise level: less than 35 dB

Possibility of parallel operation up to 10 inverters

Features

-
Two MPPT controllers

-
Support for high‑voltage LiFePO4 batteries

-
Operation in grid‑connected and off‑grid modes

-
Backup power mode (EPS)

-
Support for zero export

-
WiFi monitoring (FoxCloud)

-
Compact dimensions and low noise level

-
Protection degree IP65

-
Parallel operation of multiple inverters

-
Possibility of operation without a battery

Technical specifications:

DC input (photovoltaic side)

Backup, off‑grid mode

Power, W

6000

Maximum power, W

6600

Peak power for no more than 10 s, W

7200 (up to 60 s)

Output current, A

27.3

Max. output current, A

30

Max. transit current, A

≈54.5 (AC input max)

Output frequency, Hz

50/60

Grid type

1ph

Harmonic distortion coefficient, %

THD

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 538 active listings
  • Company
  • Registered for Sunday
  • Київ, Київська область, Україна
Recently viewed
Solar-Tech Solar-Tech Sunday 11:54
Pro Generators Київ Sunday 11:54
Hybrid inverter FOX KH10 DC AFCI WiLAN (10 kW, 3-phase, 2 MPPT, HV)
79,275 ₴
Hybrid inverter FOX KH10 DC AFCI WiLAN (10 kW, 3-phase, 2 MPPT, HV)
Київ, Україна
FOX KH10 DC AFCI WiLAN — hybrid solar inverter FOX KH10 DC AFCI WiLAN is a powerful three-phase hybrid inverter with a rated power of 10 kW, designed for building modern solar power plants with energy storage functionality. It provides stable operation in both grid-tied and off-grid systems, ideally suited for private homes, businesses, and commercial facili...
Sunday Generators вул. Стеценка, 14/44
79,275 ₴
Solar-Tech Solar-Tech Sunday 11:54
Pro Generators Київ Sunday 11:54
Hybrid inverter FOX ESS P3‑80‑Plus (80 kW, 3-phase, 8 MPPT, HV)
231,709 ₴
Hybrid inverter FOX ESS P3‑80‑Plus (80 kW, 3-phase, 8 MPPT, HV)
Київ, Україна
FOX ESS P3‑80‑Plus — hybrid solar inverter FOX ESS P3‑80‑Plus is a powerful three‑phase hybrid inverter with a rated power of 80 kW, designed for commercial and industrial solar power plants with energy storage functionality. It provides stable operation in grid‑tied, hybrid and off‑grid systems and is suitable for large enterprises, logistics complexes, the...
Sunday Generators вул. Стеценка, 14/44
231,709 ₴
Solar-Tech Solar-Tech Sunday 11:55
Pro Other Київ Sunday 11:55
Controller for solar systems SK530C8
5,662 ₴
Controller for solar systems SK530C8
Київ, Україна
Solar thermal controller – a mandatory control element for solar systems with forced circulation of the heat transfer fluid. It controls the process of heating the heat transfer fluid from the sun and monitors the condition of the heating system as a whole. The control of the solar system operates as follows – the controller receives data from temperature se...
Sunday Other вул. Стеценка, 14/44
5,662 ₴
Solar-Tech Solar-Tech Sunday 11:55
Pro Other Київ Sunday 11:55
Controller for Altek SR91 Solar Systems
6,478 ₴
Controller for Altek SR91 Solar Systems
Київ, Україна
Solar thermal controller – a mandatory control element for solar systems with forced circulation of the heat transfer fluid. It controls the process of heating the heat transfer fluid from the sun and monitors the condition of the heating system as a whole. The operation of the solar system is controlled as follows – the controller receives data from tempera...
Sunday Other вул. Стеценка, 14/44
6,478 ₴
Solar-Tech Solar-Tech Sunday 11:55
Pro Generators Київ Sunday 11:55
Expansion tank Zilmet Solar plus 80 L
4,394 ₴
Expansion tank Zilmet Solar plus 80 L
Київ, Україна
The Zilmet Solar-Plus series of expansion tanks was created and certified specifically for use in solar thermal systems as well as heating systems. The Solar-Plus expansion tanks use a special high-temperature Zilan™ membrane that withstands temperatures up to +100 °C. Maximum pressure 10 bar. -maximum working temperature of the membrane up to +100 °C -maxim...
Sunday Generators вул. Стеценка, 14/44
4,394 ₴
Call