This site uses cookies to ensure proper operation, personalization, analytics, and advertising. You can accept all cookies, decline non-essential cookies, or customize your settings. Learn more in our Privacy Policy.
Always active
Essential for core functionality, security, and authentication. Always active.
Remember your selected language, location preferences, and display options.
Help us measure traffic and user interactions to improve the site (Google Analytics).
Used to display relevant advertising and measure campaign performance (Google Ads).
A wide range of volumes for BTE-1 boilers (from 160 to 500 liters) allows meeting any hot water needs both in single-family and multi-apartment houses, and in commercial and administrative buildings.
The heater tank is made of black steel, and its inner surface is coated with high-quality enamel to provide corrosion protection.
The BTE-1 model has a large-area heat exchanger for connection to any heat sources and the fastest possible heating of hot water in the heater tank.
-
Volume from 160 to 500 liters;
-
magnesium anode to provide additional anti-corrosion protection;
-
side inspection flange;
-
high-quality insulation made of rigid polyurethane foam 50 mm thick;
-
opening for mounting an electric heating element (TEN);
-
comes equipped with a thermometer.
Technical specifications:
Nominal volume, l
191
Maximum working pressure, bar
8
Maximum working pressure of the heat exchanger, bar
6
Maximum operating temperature, ºC
95
Heat exchanger area, m2
0.95
Internal volume of the heat exchanger, (l)
5.74
Change in power in continuous operation mode (maximum output of the heat exchanger) *60-80 ºC, kW
A wide range of volumes for BTE-1 boilers (from 160 to 500 liters) allows meeting any hot water needs both in single-family and multi-apartment houses, and in commercial and administrative buildings.
The heater tank is made of black steel, and its inner surface is coated with high-quality enamel to provide corrosion protection.
The BTE-1 model has a large-area heat exchanger for connection to any heat sources and the fastest possible heating of hot water in the heater tank.
-
Volume from 160 to 500 liters;
-
magnesium anode to provide additional anti-corrosion protection;
-
side inspection flange;
-
high-quality insulation made of rigid polyurethane foam 50 mm thick;
-
opening for mounting an electric heating element (TEN);
-
comes equipped with a thermometer.
Technical specifications:
Nominal volume, l
191
Maximum working pressure, bar
8
Maximum working pressure of the heat exchanger, bar
6
Maximum operating temperature, ºC
95
Heat exchanger area, m2
0.95
Internal volume of the heat exchanger, (l)
5.74
Change in power in continuous operation mode (maximum output of the heat exchanger) *60-80 ºC, kW
32
Heat losses
1.5 kWh/24h
Inner tank material
enameled steel
Insulation
rigid PUF
Dimensions (HxØDxØd see diagram), mm
1230х600х500
Net weight, kg
78
Attributes
Related listings in your area
How far is it?Show listings in my area
Show only listings that arekm distancedShow listings
Adult diapers for sale. Size - M. There are twenty pieces. Twenty hryvnias each. Wholesale, will give for three hundred hryvnias. Also, there are diaper-pants, in the quantity of seven pieces. German. Size - XL. Two hundred hryvnias for all.
TodayColour: WhiteState: NewOther10028 - В ільський шлях
Buffer tank made of black steel VTA-1 is equipped with two heat exchangers. A heat exchanger is installed in the lower part, and in the upper part a hot water supply system heat exchanger made of stainless steel for producing hot water for domestic needs. The main distinguishing feature of this model is the ability to connect a large number of heat energy so...
Buffer tank made of black steel VTA-1 is equipped with two heat exchangers. In the lower part a heat exchanger is installed, and in the upper part a stainless steel domestic hot water heat exchanger for producing hot water for household needs. The main distinction of this model is the ability to connect a large number of heat energy sources, which use both f...
Buffer tank from black steel VTA-1 is equipped with two heat exchangers. A heat exchanger is installed in the lower part, and in the upper part a hot water supply system heat exchanger made of stainless steel for producing hot water for household needs. The main distinction of this model is the ability to connect a large number of heat energy sources that us...
Buffer tank made of black steel VTA-1 is equipped with two heat exchangers. A heat exchanger is installed in the lower part, and in the upper part a stainless steel domestic hot water heat exchanger for producing hot water for household needs. The main distinguishing feature of this model is the possibility to connect a large number of heat energy sources, w...
Buffer tank made of black steel VTA-1 is equipped with two heat exchangers. In the lower part a heat exchanger is installed, and in the upper part a stainless steel domestic hot water heat exchanger for producing hot water for household needs. The main distinction of this model is the ability to connect a large number of heat energy sources that use both fos...
Buffer tank made of black steel VTA-1 is equipped with two heat exchangers. In the lower part a heat exchanger is installed, and in the upper part a stainless steel domestic hot water heat exchanger for producing hot water for household needs. The main distinguishing feature of this model is the ability to connect a large number of heat energy sources, which...
Buffer tank made of black steel VTA-1 is equipped with two heat exchangers. There is a heat exchanger installed in the lower part, and in the upper part a domestic hot water heat exchanger made of stainless steel for producing hot water for household needs. The main distinction of this model is the ability to connect a large number of heat energy sources, wh...
Buffer tank made of black steel VTA-1 is equipped with two heat exchangers. A heat exchanger is installed in the lower part, and in the upper part a hot water supply system heat exchanger made of stainless steel for preparing hot water for domestic needs. The main feature of this model is the ability to connect a large number of heat energy sources, which us...
Buffer vessel made of black steel VTA-1 is equipped with two heat exchangers. In the lower part a heat exchanger is installed, and in the upper part a stainless steel domestic hot water heat exchanger for producing hot water for household needs. The main distinction of this model is the ability to connect a large number of heat energy sources, which use both...
Buffer tank from black steel VTA-1 is equipped with two heat exchangers. A heat exchanger is installed in the lower part, and in the upper part a stainless steel domestic hot water heat exchanger for producing hot water for household needs. The main distinction of this model is the ability to connect a large number of heat energy sources, which use both foss...
Buffer tank made of black steel VTA-1 is equipped with two heat exchangers. In the lower part a heat exchanger is installed, and in the upper part a stainless steel domestic hot water heat exchanger for preparing hot water for household needs. The main distinction of this model is the ability to connect a large number of heat energy sources that use both fos...
Buffer tank made of black steel VTA-1 is equipped with two heat exchangers. A heat exchanger is installed in the lower part, and in the upper part a hot water supply system heat exchanger made of stainless steel for producing hot water for household needs. The main distinguishing feature of this model is the ability to connect a large number of heat energy s...
Buffer tank made of black steel VTA-1 is equipped with two heat exchangers. A heat exchanger is installed in the lower part, and in the upper part a stainless steel domestic hot water heat exchanger for preparing hot water for household needs. The main distinction of this model is the ability to connect a large number of heat energy sources that use both fos...
Buffer tank made of black steel VTA-1 is equipped with two heat exchangers. In the lower part a heat exchanger is installed, and in the upper part a stainless steel domestic hot water heat exchanger for preparing hot water for household needs. The main difference of this model is the ability to connect a large number of heat energy sources, which use both fo...
Altek AC-VGL-50 - a heliosystem based on solar vacuum collectors designed to produce hot water at a specified temperature by absorbing solar radiation, converting it into heat, storing it and delivering it to the consumer. The solar vacuum collector provides collection of solar radiation in any weather, regardless of outside temperature. The absorption coeff...
Altek AC-VG-50 - a heliosystem based on solar vacuum collectors designed to produce hot water at a specified temperature by absorbing solar radiation, converting it into heat, storing it and delivering it to the consumer. The solar vacuum collector provides collection of solar radiation in any weather, regardless of the outside temperature. The absorption co...
Buffer tank made of black steel VTA-1 is equipped with two heat exchangers. A heat exchanger is installed in the lower part, and in the upper part a stainless steel domestic hot water heat exchanger for producing hot water for household needs. The main feature of this model is the ability to connect a large number of heat energy sources, which use both fossi...
Altek AP-TL-30 – thermosiphon solar system from the Ukrainian brand Altek with a 300-liter tank. The inner tank is made of stainless steel SUS316L, and the outer one is made of black metal with powder coating, reinforced frame with powder coating, 5 L filler tank. The main element of this collector model is vacuum tubes made of transparent borosilicate glass...
The vacuum collector AXIOMA AX-30HP24 is used in all-season water heating systems. This solar thermal collector is effective for year-round use in all regions of Ukraine. The vacuum tubes are coated with a three-layer high-selectivity coating ALN-AIN-SS/Cu. The solar collector is equipped with an enlarged condenser with a diameter of 24 mm, which provides a ...
The SC-LH2 vacuum collector is used in closed-type solar systems with a pump station. The efficiency of the solar collector reaches 87-92%. Due to design features calculated for our climatic conditions, the SC-LH2 has maximum performance. It has high performance in conditions of low solar insolation, providing the collection of the sun’s energy regardless of...
The vacuum collector SC-LH1 is used in closed-type solar systems with a pumping station. The efficiency of the solar collector reaches 87%. It has high performance under low solar insolation conditions, providing solar energy collection regardless of weather conditions, absorbing up to 90% of the sun's energy. The frame is made of high-quality aluminum with ...
Drainback heliosystem protection technology The drainback technology is designed to protect the heliosystem from boiling or freezing of the heat transfer fluid and from formation of airlocks. Overheating and presence of air in the system are the main causes of failures that can lead to serious damage. The system consists of special solar collectors, a specia...
Special high-temperature thermal insulation Kaiflex EPDM is used for insulating and protecting pipelines of steam and boiler equipment, heating systems, and hot water supply. Kaiflex EPDM retains elasticity across the entire range of operating temperatures. -operating temperature range - from -50 °C (-200 °C) to +150 °C (+175 °C for up to 3 hours); -does not...
Thermosiphon solar collector with a pressured tank AXIOMA AX-20D is used in seasonal solar water-heating systems. This solar collector is used to provide hot water for a private house, country house, recreation base. The vacuum tubes are coated with a three-layer high-selectivity coating ALN-AIN-SS/Cu. The presence of a pressured tank allows this solar colle...
The Zilmet Solar-Plus series of expansion tanks is created and certified specifically for use in solar systems, as well as in heating systems. The Solar-Plus expansion tanks use a special high-temperature Zilan™ membrane that withstands temperatures up to +100 °C. Maximum pressure 10 bar. -maximum operating temperature of the membrane up to +100 °C -maximum ...
Solar thermal controller – a mandatory control element for solar systems with forced circulation of the heat-transfer fluid. It controls the process of heating the heat-transfer fluid from the sun and monitors the state of the overall heating system. Operation of the solar system is as follows – the controller receives data from temperature sensors installed...
Special high-temperature thermal insulation Kaiflex EPDM is used for insulation and protection of steam and boiler equipment pipelines, heating systems, and hot water supply. Kaiflex EPDM retains elasticity across the entire range of operating temperatures. -operating temperature range - from -50 °C (-200 °C) to +150 °C (+175 °C for up to 3 hours); -does not...
Aquasystem VSV200 - expansion tank for solar systems, vertical on legs. The Aquasystem VS series of expansion tanks is designed specifically for use in solar systems as well as heating systems. The Italian company AQUASYSTEM S.r.l, founded in 1965, is a leading manufacturer of expansion tanks and hydroaccumulators. AQUASYSTEM's product range includes tanks f...
Solar thermal controller – a mandatory control element for solar systems with forced circulation of the heat transfer fluid. It controls the process of heating the heat transfer fluid from the sun and monitors the condition of the heating system as a whole. Control of the solar system operates as follows – the controller receives data from temperature sensor...
Solar thermal controller – a required control element for solar systems with forced circulation of the heat transfer fluid. It controls the process of heating the heat transfer fluid from the sun and monitors the condition of the heating system as a whole. Control of the solar system operates as follows – the controller receives data from temperature sensors...
Attention! This offer is for informational purposes; to achieve good savings results, each project is calculated individually. The station power indicates the amount of electricity the station will generate in one hour under ideal conditions. A grid-tied solar power plant for self-consumption is intended to reduce electricity consumption from the grid. The p...
Solar thermal controller – a mandatory control element for solar systems with forced circulation of the heat transfer fluid. It controls the process of heating the heat transfer fluid from the sun and monitors the condition of the heating system as a whole. The operation of the solar system is managed as follows – the controller receives data from temperatur...
Kaiflex® EF - a high-quality thermal insulation material made of closed-cell expanded synthetic rubber (Elastomer). High quality, a wide range of applications, and excellent technical characteristics make Kaiflex EF the best option when choosing insulation for freezing and refrigeration systems, ventilation and air conditioning systems, cold and hot water su...
Armaflex® AC - pipe thermal insulation made of foamed synthetic rubber, resistant to atmospheric conditions and high temperatures. -Material - foamed synthetic rubber (elastomer); -The thermal insulation is intended for heating, cold supply and air conditioning systems; -Temperature range - -50°C/+105°C; -Color – black; -Water vapor diffusion resistance fact...
Armaflex® AC - tubular thermal insulation made of foamed synthetic rubber, resistant to weather conditions and high temperatures. -Material - foamed synthetic rubber (elastomer); -The insulation is intended for heating, cooling and air conditioning systems; -Temperature range - -50°C/+105°C; -Color – black; -Water vapor diffusion resistance factor μ>7000;...