This site uses cookies to ensure proper operation, personalization, analytics, and advertising. You can accept all cookies, decline non-essential cookies, or customize your settings. Learn more in our Privacy Policy.
Always active
Essential for core functionality, security, and authentication. Always active.
Remember your selected language, location preferences, and display options.
Help us measure traffic and user interactions to improve the site (Google Analytics).
Used to display relevant advertising and measure campaign performance (Google Ads).
Bearing 7509A (32210) BT1-0654 SKF (Ukraine) is a tapered roller bearing designed to operate under combined radial and axial loads. Thanks to the roller design, the bearing has high load capacity, stiffness, and resistance to misalignment and shaft deflection.
The bearing is separable: the inner ring with tapered rollers and the outer ring can be installed separately. This simplifies assembly and maintenance.
Dimensions: inner diameter — 45 mm, outer diameter — 85 mm, width — 24.75 mm. Suitable for heavily loaded units of agricultural machinery and other mechanisms where reliability and long service life are important.
Bearing 7509A (32210) BT1-0654 SKF (Ukraine) is a tapered roller bearing designed to operate under combined radial and axial loads. Thanks to the roller design, the bearing has high load capacity, stiffness, and resistance to misalignment and shaft deflection.
The bearing is separable: the inner ring with tapered rollers and the outer ring can be installed separately. This simplifies assembly and maintenance.
Dimensions: inner diameter — 45 mm, outer diameter — 85 mm, width — 24.75 mm. Suitable for heavily loaded units of agricultural machinery and other mechanisms where reliability and long service life are important.
Attributes
Related listings in your area
How far is it?Show listings in my area
Show only listings that arekm distancedShow listings
Диск 650 мм АГ 2.1.01-02 (6в.) для дискової борони АГ, АГП, УДА, ДДР встановлюється за допомогою осі та кріпильних метизів на стійку дискових агрегатів. Особливості конструкції: - Матеріал: Диск виготовлений із високоякісної сталі, що забезпечує йому високу зносостійкість і довговічність. Використання спеціальних сталей дозволяє диску витримувати значні меха...
Характеристика тяги КІС09.00.602Б-02 виготовлена з круглого прутка діаметром 16 мм ГОСТ 7417-75 сталь 45В ГОСТ 1051-73, довжина тяги 120 мм, різьблення М16 завдовжки 90 мм, один кінець сплющений методом кування, в ньому просвердлено отвір д=10мм.
Стійка лапи виготовлена зі смуги товщиною 16 мм та шириною 45 мм зі сталі 45; лапи стрілчасті виготовлені з листа товщиною 6 мм із сталі 65Г; ширина лапи 270мм.
Пружина стійки культиватора КН 2, 8.00.28 основна частина вузла «Пружинний блок стійки культиватора КН у зборі», встановлюється у верхній частині стійки культиватора КН, приєднується до рами культиватора, служить для захисту робочого органу (стрілчастої лапи культиватора КН) від пошкодження при наїзді на перешкоду в ґрунті (камінів, металу, уламків бетонних ...
Втулка кріплення вузла пружин культиватора КН 2,8.02.62 Частина кріплення вузла «Пружинний блок стійки культиватора КН у зборі КН2,8.02.60.27», встановлюється на вісь повороту пружинного блоку у верхній частині стійки лапи КН, служить для забезпечення безлюфтових поворотно-поступальних коливань стійки лапи при роботі культиватора. Характеристика втулки культ...
Труба граблини культиватора навісного КН 3,8.03.01 Виготовлена з труби із зовнішнім діаметром 57 мм, товщиною стінки 5 мм, із сталі В20 ГОСТ 8731-87, довжиною 1820 мм. На трубі розташовано 11 наскрізних отворів діаметром 11 мм із кроком між ними 173 мм.
Гребінка для культиватора КН-2.8 та КН-3.8 Призначення: допоміжний робочий орган культиватора КН, встановлюється на трубі грабліни, завдяки пружинному гребінці служить для додаткового подрібнення ґрунту при роботі культиватора, а також для вичісування ниток бур’янів з обробленого шару ґрунту та пригладжування його. Характеристики гребінки культиватора навісн...
Петля тримання гребінки культиватора КН (КН 2,8.03.03) Частина виробу «Культиватор навісний КН-2,8 або культиватора навісного КН-3,8», встановлюється у вузлі «Грабліна КН у зборі», служить для утримання гребінки КН 2,8.03.02 при її встановленні на трубу граблі культиваторів в процесі складання готовий вузол та знаходження зазначеної труби під час роботи куль...
Втулка кронштейн рами культиватора КН 2,8 та КН 3,8 (КН2,8.03.12) Призначення: частина кріплення вузла “Труба грабліни” культиватора КН, встановлюється в кронштейн рами культиватора, служить для забезпечення щільного обхвату кронштейном згаданої труби грабліни для попередження випадання її в роботі культиватора при ослаблення металовиробів. Характеристика вт...
The 3056205 2RS bearing is a double-row angular contact ball bearing manufactured to GOST 4252-75. Equipped with rubber seals on both sides (2RS), which provide reliable protection against dust, moisture and foreign particles while retaining lubricant inside. This bearing is designed to take radial and axial loads in both directions and is used where increas...
Bearing 2007107A (32007) 35×62×18 mm | Buy Bearing 2007107A (32007) 35×62×18 mm Bearing 2007107A (32007) is a single-row tapered roller radial-thrust bearing with a separable design. It is intended to take radial and axial loads simultaneously, with the axial load taken in one direction. Thanks to the tapered rollers, the bearing has a high load capacity and...
The 7210A bearing from the Polish manufacturer CX is a single-row tapered roller bearing that meets the GOST 7210 A standard. It is designed to take simultaneous radial and axial loads. The design increases load capacity compared to ball bearings and provides greater assembly stiffness, reducing shaft misalignment and deflection during operation. This bearin...
Bearing 53618 (22318 CW33) CX 90×190×64 mm | Buy Bearing 53618 (22318 CW33) CX 90×190×64 mm Bearing 53618 (22318 CW33) is a double-row spherical roller bearing designed to withstand significant radial and axial loads in both directions. The spherical design provides reliable bearing operation in the presence of possible shaft and housing misalignments. The b...
Bearing 2007112A (32012) 60×95×23 mm | Buy Bearing 2007112A (32012) 60×95×23 mm Bearing 2007112A (32012) is a single-row tapered roller radial-thrust bearing with increased load capacity. It is designed to simultaneously accept substantial radial and axial loads in one direction. The separable design allows the inner ring with rollers and cage and the outer ...
Bearing 3610 50×110×40 mm | Spherical roller double-row Bearing 3610 50×110×40 mm Bearing 3610 is a double-row spherical roller bearing designed to operate under high radial and axial loads. The spherical design ensures reliable operation of the assembly and compensates for possible shaft misalignments. Suitable for use in agricultural machinery, industrial ...
The UCF 308 housed bearing is a robust assembly consisting of a self-aligning ball bearing of the UC308 series and a cast iron square housing type F (flanged housing with 4 holes). Due to its ability to compensate shaft misalignment and its resistance to loads, it is ideally suited for use under intensive operating conditions. Technical specifications: -Desi...
Porsche Macan 2022 for sale. Location for inspection: Brovarskyi Ave 17 (TC Novus), Kyiv. Colour: black Mileage: 75,000 km Fuel: petrol Gearbox: automatic Drivetrain: all-wheel drive