Bearing 7210A
224 ₴
Spare parts
Yesterday 12:48
Україна
Біла Церква Get directions →
бульвар М. Грушевського, 13
5 views
Published 12 hours ago by БІЛОЦЕРКІВМАЗ
224 ₴
In Spare parts category
бульвар М. Грушевського, 13, Біла Церква, Україна
Get directions →
5 item views
The 7210A bearing from the Polish manufacturer CX is a single-row tapered roller bearing that meets the GOST 7210 A standard. It is designed to take simultaneous radial and axial loads. The design increases load capacity compared to ball bearings and provides greater assembly stiffness, reducing shaft misalignment and deflection during operation.
This bearing is separable: the inner ring with the set of tapered rollers and the outer ring can be installed separately. This simplifies installation, disassembly and clearance adjustment in the assembly. The 7210A bearing is suitable for heavily loaded assemblies where increased stiffness, reliability and durability are required.
The bearing is widely used in industrial units, gearboxes, automotive transmissions, agricultural and construction machinery. Its strength and precision provide stable equipment operation even under intensive loads.
Specifications
-
Inner diameter (d): 50 mm
-
Outer diameter (D): 90 mm
-
Width (B): 21.75 mm
-
Bearing type: Tapered roller, single-row
-
Standard: GOST 7210 A
-
Manufacturer: CX (Poland)
-
Design features: Separable bearing, inner and outer rings can be installed separately
-
Application area: Heavily loaded assemblies with increased requirements for stiffness and durability
Advantages of the 7210A bearing
-
High load capacity and assembly stiffness
-
Accepts radial and axial loads simultaneously
-
Counteracts shaft misalignment and deflection
-
Easy installation and replacement thanks to the separable design
-
Reliability and durability even under intensive operation
The 7210A bearing is a reliable solution for industrial and agricultural equipment where stable and long-term operation of mechanisms is required.
Read morePublished on 2026/10/11
Description
The 7210A bearing from the Polish manufacturer CX is a single-row tapered roller bearing that meets the GOST 7210 A standard. It is designed to take simultaneous radial and axial loads. The design increases load capacity compared to ball bearings and provides greater assembly stiffness, reducing shaft misalignment and deflection during operation.
This bearing is separable: the inner ring with the set of tapered rollers and the outer ring can be installed separately. This simplifies installation, disassembly and clearance adjustment in the assembly. The 7210A bearing is suitable for heavily loaded assemblies where increased stiffness, reliability and durability are required.
The bearing is widely used in industrial units, gearboxes, automotive transmissions, agricultural and construction machinery. Its strength and precision provide stable equipment operation even under intensive loads.
Specifications
-
Inner diameter (d): 50 mm
-
Outer diameter (D): 90 mm
-
Width (B): 21.75 mm
-
Bearing type: Tapered roller, single-row
-
Standard: GOST 7210 A
-
Manufacturer: CX (Poland)
-
Design features: Separable bearing, inner and outer rings can be installed separately
-
Application area: Heavily loaded assemblies with increased requirements for stiffness and durability
Advantages of the 7210A bearing
-
High load capacity and assembly stiffness
-
Accepts radial and axial loads simultaneously
-
Counteracts shaft misalignment and deflection
-
Easy installation and replacement thanks to the separable design
-
Reliability and durability even under intensive operation
The 7210A bearing is a reliable solution for industrial and agricultural equipment where stable and long-term operation of mechanisms is required.
Attributes
Related listings in your area
How far is it?
Show listings in my area
Show only listings that are
km distanced
Show listings
Contact the seller
User is offline
- 592 active listings
- Company
- Registered for Yesterday
- Біла Церква, Київська область, Україна
Related items
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Кришка 105.003.014-16
423 ₴
Кришка 105.003.014-16
Біла Церква, Україна
Кришка 105.003.014-16
Yesterday
Spare parts
бульвар М. Грушевського, 13
423 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Кришка 105.003.017-01
456 ₴
Кришка 105.003.017-01
Біла Церква, Україна
Кришка 105.003.017-01
Yesterday
Spare parts
бульвар М. Грушевського, 13
456 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Корпус шнека 105.012.241
720 ₴
Корпус шнека 105.012.241
Біла Церква, Україна
Корпус шнека 105.012.241
Yesterday
Spare parts
бульвар М. Грушевського, 13
720 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Зірочка 105.017.12.007
840 ₴
Зірочка 105.017.12.007
Біла Церква, Україна
Зірочка 105.017.12.007
Yesterday
Spare parts
бульвар М. Грушевського, 13
840 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Кришка колісного ходу 105.043.07.011
138 ₴
Кришка колісного ходу 105.043.07.011
Біла Церква, Україна
Кришка маточини колісного ходу 105.043.07.011 дискових борін АГП, УДА, ДІЧ, ГР, комбайнів КРП-2,0, КПФ-2,4 Призначена для встановлюється на маточинах коліс колісних ходів причіпних і напівпричіпних сільгоспмашин (ґрунтообробних агрегатів АГП, УДА, ДІЧ, ГР, комбайнів КРП-2,0, КПФ-2,4), слугує для захисту підшипників маточини від потрапляння всередину маточини...
Yesterday
Spare parts
бульвар М. Грушевського, 13
138 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Диск ромашка 650 мм на 8 отв.
1,980 ₴
Диск ромашка 650 мм на 8 отв.
Біла Церква, Україна
Диск ромашка 650 мм на 8 отв.
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,980 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Диск АГ2.1.01-01 Д 510мм 8 отв
1,500 ₴
Диск АГ2.1.01-01 Д 510мм 8 отв
Біла Церква, Україна
Диск АГ2.1.01-01 Д 510мм 8 отв
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,500 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Диск АГ2.1.01-02 650 мм (6 отв.)
1,980 ₴
Диск АГ2.1.01-02 650 мм (6 отв.)
Біла Церква, Україна
Диск 650 мм АГ 2.1.01-02 (6в.) для дискової борони АГ, АГП, УДА, ДДР встановлюється за допомогою осі та кріпильних метизів на стійку дискових агрегатів. Особливості конструкції: - Матеріал: Диск виготовлений із високоякісної сталі, що забезпечує йому високу зносостійкість і довговічність. Використання спеціальних сталей дозволяє диску витримувати значні меха...
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,980 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Chamomile disc DMT-653
1,980 ₴
Chamomile disc DMT-653
Біла Церква, Україна
Chamomile disc DMT-653
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,980 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Drawbar spring of cultivator KN KIS 09.00.602B-02
147 ₴
Drawbar spring of cultivator KN KIS 09.00.602B-02
Біла Церква, Україна
Specification of drawbar KIS09.00.602B-02 manufactured from round rod 16 mm diameter GOST 7417-75 steel 45V GOST 1051-73, drawbar length 120 mm, thread M16 with length 90 mm, one end flattened by forging method, a hole ø10 mm drilled in it.
Yesterday
Spare parts
бульвар М. Грушевського, 13
147 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Paw Stand KN 2,8.00.09
726 ₴
Paw Stand KN 2,8.00.09
Біла Церква, Україна
The paw stand is made from a strip 16 mm thick and 45 mm wide from steel 45; arrow-shaped paws are made from sheet 6 mm thick from steel 65G; paw width 270 mm.
Yesterday
Spare parts
бульвар М. Грушевського, 13
726 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Spring KN 2,8.00.28 of cultivator shank
387 ₴
Spring KN 2,8.00.28 of cultivator shank
Біла Церква, Україна
Spring of cultivator shank KN 2, 8.00.28 the main part of the assembly "Spring block of the cultivator shank KN assembled", installed in the upper part of the cultivator shank KN, attached to the cultivator frame, serves to protect the working tool (the cultivator KN sweep point) from damage when driving over an obstacle in the soil (stones, metal, fragments...
Yesterday
Spare parts
бульвар М. Грушевського, 13
387 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Bed frame KN 2,8.02.60
2,073 ₴
Bed frame KN 2,8.02.60
Біла Церква, Україна
Bed frame KN 2,8.02.60
Yesterday
Spare parts
бульвар М. Грушевського, 13
2,073 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Cultivator tine stand block KN 2,8.02.60.27
6,159 ₴
Cultivator tine stand block KN 2,8.02.60.27
Біла Церква, Україна
Front cultivator stand assembly with 270 mm blade
Yesterday
Spare parts
бульвар М. Грушевського, 13
6,159 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Cultivator shank assembly block KN 2,8.02.60.33
6,192 ₴
Cultivator shank assembly block KN 2,8.02.60.33
Біла Церква, Україна
Front cultivator shank assembly with 330 mm blade
Yesterday
Spare parts
бульвар М. Грушевського, 13
6,192 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Bushing KN 2,8.02.61
159 ₴
Bushing KN 2,8.02.61
Біла Церква, Україна
Bushing KN 2,8.02.61
Yesterday
Spare parts
бульвар М. Грушевського, 13
159 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Bushing for mounting the spring assembly of cultivator KN 2,8.02.62
219 ₴
Bushing for mounting the spring assembly of cultivator KN 2,8.02.62
Біла Церква, Україна
Bushing for mounting the spring assembly of cultivator KN 2,8.02.62 Part of the mounting of the "Spring block of the cultivator shank assembly KN in complete assembly KN2,8.02.60.27", installed on the pivot axis of the spring block at the upper part of the shank of the KN tine, serves to ensure backlash-free oscillating and reciprocating movements of the tin...
Yesterday
Spare parts
бульвар М. Грушевського, 13
219 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Clamp KN 2,8.02.65
159 ₴
Clamp KN 2,8.02.65
Біла Церква, Україна
Clamp KN 2,8.02.65 fastening of the crossbar to the frame
Yesterday
Spare parts
бульвар М. Грушевського, 13
159 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Grabline Tube KN 3.8.03.01
1,824 ₴
Grabline Tube KN 3.8.03.01
Біла Церква, Україна
Grabline tube for mounted cultivator KN 3.8.03.01 Manufactured from a tube with an outer diameter of 57 mm, wall thickness 5 mm, made of steel V20 GOST 8731-87, length 1820 mm. The tube has 11 through holes with a diameter of 11 mm spaced 173 mm apart.
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,824 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Cultivator tine comb KN 2.8.03.02
351 ₴
Cultivator tine comb KN 2.8.03.02
Біла Церква, Україна
Tine comb for cultivator KN-2.8 and KN-3.8 Purpose: an auxiliary working element of the KN cultivator, mounted on the rake tube; thanks to the spring tine it serves for additional soil crumbling during cultivator operation, as well as for combing out weed threads from the worked soil layer and smoothing it. Characteristics of the mounted KN cultivator tine c...
Yesterday
Spare parts
бульвар М. Грушевського, 13
351 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Cultivator Hinge KN 2.8.03.03
108 ₴
Cultivator Hinge KN 2.8.03.03
Біла Церква, Україна
Holding hinge for the comb of cultivator KN (KN 2.8.03.03) Part of the product "Mounted cultivator KN-2.8 or mounted cultivator KN-3.8", installed in the assembly "Rake KN assembled", serves to hold the comb KN 2.8.03.02 when it is mounted on the rake tube of cultivators during assembly of the finished unit and for securing the mentioned tube during cultivat...
Yesterday
Spare parts
бульвар М. Грушевського, 13
108 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Bushing for cultivator KN 2.8.03.12
240 ₴
Bushing for cultivator KN 2.8.03.12
Біла Церква, Україна
Bushing bracket of the frame for cultivator KN 2.8 and KN 3.8 (KN2.8.03.12) Purpose: a part of the fastening of the "Rake tube" assembly of the KN cultivator, installed in the bracket of the cultivator frame, serves to ensure a tight grip of the mentioned rake tube by the bracket to prevent its falling out during cultivator operation when the metal parts loo...
Yesterday
Spare parts
бульвар М. Грушевського, 13
240 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Bracket KN 2,8.03.20
1,032 ₴
Bracket KN 2,8.03.20
Біла Церква, Україна
Bracket KN 2,8.03.20
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,032 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Shaft KPI 01.262A
2,007 ₴
Shaft KPI 01.262A
Біла Церква, Україна
Shaft KPI 01.262A
Yesterday
Spare parts
бульвар М. Грушевського, 13
2,007 ₴
Recently viewed
БІЛОЦЕРКІВМАЗ
Yesterday 12:48
Bearing 3056205
137 ₴
Bearing 3056205
Біла Церква, Україна
The 3056205 2RS bearing is a double-row angular contact ball bearing manufactured to GOST 4252-75. Equipped with rubber seals on both sides (2RS), which provide reliable protection against dust, moisture and foreign particles while retaining lubricant inside. This bearing is designed to take radial and axial loads in both directions and is used where increas...
Yesterday
Spare parts
бульвар М. Грушевського, 13
137 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Cover KPI 01.243A
423 ₴
Cover KPI 01.243A
Біла Церква, Україна
Cover KPI 01.243A
Yesterday
Spare parts
бульвар М. Грушевського, 13
423 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:05
Bearing 1507
195 ₴
Bearing 1507
Біла Церква, Україна
GOST 5720-75 for double-row radial ball spherical bearings replaced by GOST 28428-90
Yesterday
Spare parts
бульвар М. Грушевського, 13
195 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 12:48
Bearing 3609
700 ₴
Bearing 3609
Біла Церква, Україна
Bearing 3609 45×100×36 mm | Spherical roller Bearing 3609 45×100×36 mm Bearing 3609 is a double-row spherical roller bearing with high load capacity and the ability to compensate shaft misalignment up to 2–3°. The primary load is radial; the bearing also takes axial loads in both directions. Thanks to its robust design, the bearing is resistant to impact loa...
Yesterday
Spare parts
бульвар М. Грушевського, 13
700 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 12:48
Bearing 3610
815 ₴
Bearing 3610
Біла Церква, Україна
Bearing 3610 50×110×40 mm | Spherical roller double-row Bearing 3610 50×110×40 mm Bearing 3610 is a double-row spherical roller bearing designed to operate under high radial and axial loads. The spherical design ensures reliable operation of the assembly and compensates for possible shaft misalignments. Suitable for use in agricultural machinery, industrial ...
Yesterday
Spare parts
бульвар М. Грушевського, 13
815 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 12:48
Bearing 7208A
140 ₴
Bearing 7208A
Біла Церква, Україна
Bearing 7208 [30208] single-row tapered roller The single-row tapered roller bearing 7208 [30208] with a steel cage is designed to operate under radial and axial loads. The bearing takes axial load in one direction and provides reliable operation of agricultural machinery assemblies. Thanks to the tapered roller design, the bearing ensures stable mechanism o...
Yesterday
Spare parts
бульвар М. Грушевського, 13
140 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 12:48
Bearing 7205A
76 ₴
Bearing 7205A
Біла Церква, Україна
The 7205A bearing is a single-row tapered roller bearing. This type of bearing is designed to take radial and axial loads (mainly axial in one direction), and is ideal for applications under high loads and speeds. Technical specifications: - Inner diameter (d): 25 mm - Outer diameter (D): 52 mm - Width (B): 16.25 mm - Type: Roller, single-row, tapered - Desi...
Yesterday
Spare parts
бульвар М. Грушевського, 13
76 ₴
