Bracket for securing the row unit to the frame for Corn Plant (KMS-8) corn header
1,500 ₴
Published 14 hours ago by БІЛОЦЕРКІВМАЗ
1,500 ₴
In Spare parts category
бульвар М. Грушевського, 13, Біла Церква, Україна
Get directions →
1 item view
Purpose
The bracket for securing the row unit to the frame is intended for reliable fastening of the working elements of the header (in particular the row units) to the support frame of the Corn Plant (KMS-8) corn header.
This element provides structural rigidity, correct positioning of the row units in the rows, as well as resistance of the assembly to vibrations and loads during corn harvesting.
Design
The bracket is usually made from hard sheet or profile metal, reinforced with stiffening ribs. It has mounting holes for fastening to the frame and the row unit assembly.
Technical specifications (example)
-
Material: structural steel (grade St3 or similar)
-
Coating: powder coating
-
Compatibility: Corn Plant KMS-8 headers
Advantages
- Full compatibility with Corn Plant-8 headers
The bracket is specifically designed for Corn Plant equipment and does not require additional modifications or changes to mounting points.
- High strength and rigidity
Withstands constant dynamic loads, vibrations, and exposure to dust, moisture, and temperatures.
- Protection of the working assembly geometry
Ensures the correct position of the row unit relative to the frame, reducing the likelihood of misalignment or wear.
- Easy installation
Quickly mounted using standard bolted connections or welding (depending on the header design).
Application area
-
Corn header Corn Plant (KMS-8)
-
Systems for fastening row units, shafts, feeding elements
-
Service maintenance and major repair of headers
Published on 2026/10/11
Description
Purpose
The bracket for securing the row unit to the frame is intended for reliable fastening of the working elements of the header (in particular the row units) to the support frame of the Corn Plant (KMS-8) corn header.
This element provides structural rigidity, correct positioning of the row units in the rows, as well as resistance of the assembly to vibrations and loads during corn harvesting.
Design
The bracket is usually made from hard sheet or profile metal, reinforced with stiffening ribs. It has mounting holes for fastening to the frame and the row unit assembly.
Technical specifications (example)
-
Material: structural steel (grade St3 or similar)
-
Coating: powder coating
-
Compatibility: Corn Plant KMS-8 headers
Advantages
- Full compatibility with Corn Plant-8 headers
The bracket is specifically designed for Corn Plant equipment and does not require additional modifications or changes to mounting points.
- High strength and rigidity
Withstands constant dynamic loads, vibrations, and exposure to dust, moisture, and temperatures.
- Protection of the working assembly geometry
Ensures the correct position of the row unit relative to the frame, reducing the likelihood of misalignment or wear.
- Easy installation
Quickly mounted using standard bolted connections or welding (depending on the header design).
Application area
-
Corn header Corn Plant (KMS-8)
-
Systems for fastening row units, shafts, feeding elements
-
Service maintenance and major repair of headers
Attributes
Related listings in your area
How far is it?
Show listings in my area
Show only listings that are
km distanced
Show listings
Contact the seller
User is offline
- 592 active listings
- Company
- Registered for Yesterday
- Біла Церква, Київська область, Україна
Related items
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Cover 105.003.014-16
423 ₴
Cover 105.003.014-16
Біла Церква, Україна
Cover 105.003.014-16
Yesterday
Spare parts
бульвар М. Грушевського, 13
423 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Cover 105.003.017-01
456 ₴
Cover 105.003.017-01
Біла Церква, Україна
Cover 105.003.017-01
Yesterday
Spare parts
бульвар М. Грушевського, 13
456 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Auger housing 105.012.241
720 ₴
Auger housing 105.012.241
Біла Церква, Україна
Auger housing 105.012.241
Yesterday
Spare parts
бульвар М. Грушевського, 13
720 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Star 105.017.12.007
840 ₴
Star 105.017.12.007
Біла Церква, Україна
Star 105.017.12.007
Yesterday
Spare parts
бульвар М. Грушевського, 13
840 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Wheel track hub cover 105.043.07.011
138 ₴
Wheel track hub cover 105.043.07.011
Біла Церква, Україна
Hub cover of the wheel track 105.043.07.011 for disc harrows AGP, UDA, DICH, GR, combines KRP-2.0, KPF-2.4 Designed to be installed on the wheel hubs of the wheel tracks of towed and semi-trailed agricultural machines (soil cultivation units AGP, UDA, DICH, GR, combines KRP-2.0, KPF-2.4), it serves to protect the hub bearings from dust and dirt entering the ...
Yesterday
Spare parts
бульвар М. Грушевського, 13
138 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Flower-shaped disk 650 mm with 8 holes
1,980 ₴
Flower-shaped disk 650 mm with 8 holes
Біла Церква, Україна
Flower-shaped disk 650 mm with 8 holes.
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,980 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Disk AG2.1.01-01 D 510mm 8 holes
1,500 ₴
Disk AG2.1.01-01 D 510mm 8 holes
Біла Церква, Україна
Disk AG2.1.01-01 D 510mm 8 holes
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,500 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Disk AG2.1.01-02 650 mm (6 holes)
1,980 ₴
Disk AG2.1.01-02 650 mm (6 holes)
Біла Церква, Україна
Disk 650 mm AG 2.1.01-02 (6 h.) for the AG, AGP, UDA, DDR disc harrow is mounted by means of an axle and fastening hardware to the disc unit arm. Design features: -Material: The disk is made of high-quality steel, providing high wear resistance and durability. The use of special steels allows the disk to withstand significant mechanical loads and aggressive ...
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,980 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Chamomile disc DMT-653
1,980 ₴
Chamomile disc DMT-653
Біла Церква, Україна
Chamomile disc DMT-653
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,980 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Drawbar spring of cultivator KN KIS 09.00.602B-02
147 ₴
Drawbar spring of cultivator KN KIS 09.00.602B-02
Біла Церква, Україна
Specification of drawbar KIS09.00.602B-02 manufactured from round rod 16 mm diameter GOST 7417-75 steel 45V GOST 1051-73, drawbar length 120 mm, thread M16 with length 90 mm, one end flattened by forging method, a hole ø10 mm drilled in it.
Yesterday
Spare parts
бульвар М. Грушевського, 13
147 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Paw Stand KN 2,8.00.09
726 ₴
Paw Stand KN 2,8.00.09
Біла Церква, Україна
The paw stand is made from a strip 16 mm thick and 45 mm wide from steel 45; arrow-shaped paws are made from sheet 6 mm thick from steel 65G; paw width 270 mm.
Yesterday
Spare parts
бульвар М. Грушевського, 13
726 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Spring KN 2,8.00.28 of cultivator shank
387 ₴
Spring KN 2,8.00.28 of cultivator shank
Біла Церква, Україна
Spring of cultivator shank KN 2, 8.00.28 the main part of the assembly "Spring block of the cultivator shank KN assembled", installed in the upper part of the cultivator shank KN, attached to the cultivator frame, serves to protect the working tool (the cultivator KN sweep point) from damage when driving over an obstacle in the soil (stones, metal, fragments...
Yesterday
Spare parts
бульвар М. Грушевського, 13
387 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Bed frame KN 2,8.02.60
2,073 ₴
Bed frame KN 2,8.02.60
Біла Церква, Україна
Bed frame KN 2,8.02.60
Yesterday
Spare parts
бульвар М. Грушевського, 13
2,073 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Cultivator tine stand block KN 2,8.02.60.27
6,159 ₴
Cultivator tine stand block KN 2,8.02.60.27
Біла Церква, Україна
Front cultivator stand assembly with 270 mm blade
Yesterday
Spare parts
бульвар М. Грушевського, 13
6,159 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Cultivator shank assembly block KN 2,8.02.60.33
6,192 ₴
Cultivator shank assembly block KN 2,8.02.60.33
Біла Церква, Україна
Front cultivator shank assembly with 330 mm blade
Yesterday
Spare parts
бульвар М. Грушевського, 13
6,192 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Bushing KN 2,8.02.61
159 ₴
Bushing KN 2,8.02.61
Біла Церква, Україна
Bushing KN 2,8.02.61
Yesterday
Spare parts
бульвар М. Грушевського, 13
159 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Bushing for mounting the spring assembly of cultivator KN 2,8.02.62
219 ₴
Bushing for mounting the spring assembly of cultivator KN 2,8.02.62
Біла Церква, Україна
Bushing for mounting the spring assembly of cultivator KN 2,8.02.62 Part of the mounting of the "Spring block of the cultivator shank assembly KN in complete assembly KN2,8.02.60.27", installed on the pivot axis of the spring block at the upper part of the shank of the KN tine, serves to ensure backlash-free oscillating and reciprocating movements of the tin...
Yesterday
Spare parts
бульвар М. Грушевського, 13
219 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Clamp KN 2,8.02.65
159 ₴
Clamp KN 2,8.02.65
Біла Церква, Україна
Clamp KN 2,8.02.65 fastening of the crossbar to the frame
Yesterday
Spare parts
бульвар М. Грушевського, 13
159 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Grabline Tube KN 3.8.03.01
1,824 ₴
Grabline Tube KN 3.8.03.01
Біла Церква, Україна
Grabline tube for mounted cultivator KN 3.8.03.01 Manufactured from a tube with an outer diameter of 57 mm, wall thickness 5 mm, made of steel V20 GOST 8731-87, length 1820 mm. The tube has 11 through holes with a diameter of 11 mm spaced 173 mm apart.
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,824 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Cultivator tine comb KN 2.8.03.02
351 ₴
Cultivator tine comb KN 2.8.03.02
Біла Церква, Україна
Tine comb for cultivator KN-2.8 and KN-3.8 Purpose: an auxiliary working element of the KN cultivator, mounted on the rake tube; thanks to the spring tine it serves for additional soil crumbling during cultivator operation, as well as for combing out weed threads from the worked soil layer and smoothing it. Characteristics of the mounted KN cultivator tine c...
Yesterday
Spare parts
бульвар М. Грушевського, 13
351 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Cultivator Hinge KN 2.8.03.03
108 ₴
Cultivator Hinge KN 2.8.03.03
Біла Церква, Україна
Holding hinge for the comb of cultivator KN (KN 2.8.03.03) Part of the product "Mounted cultivator KN-2.8 or mounted cultivator KN-3.8", installed in the assembly "Rake KN assembled", serves to hold the comb KN 2.8.03.02 when it is mounted on the rake tube of cultivators during assembly of the finished unit and for securing the mentioned tube during cultivat...
Yesterday
Spare parts
бульвар М. Грушевського, 13
108 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Bushing for cultivator KN 2.8.03.12
240 ₴
Bushing for cultivator KN 2.8.03.12
Біла Церква, Україна
Bushing bracket of the frame for cultivator KN 2.8 and KN 3.8 (KN2.8.03.12) Purpose: a part of the fastening of the "Rake tube" assembly of the KN cultivator, installed in the bracket of the cultivator frame, serves to ensure a tight grip of the mentioned rake tube by the bracket to prevent its falling out during cultivator operation when the metal parts loo...
Yesterday
Spare parts
бульвар М. Грушевського, 13
240 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Bracket KN 2,8.03.20
1,032 ₴
Bracket KN 2,8.03.20
Біла Церква, Україна
Bracket KN 2,8.03.20
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,032 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Shaft KPI 01.262A
2,007 ₴
Shaft KPI 01.262A
Біла Церква, Україна
Shaft KPI 01.262A
Yesterday
Spare parts
бульвар М. Грушевського, 13
2,007 ₴
Recently viewed
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Holder UD7.0.00A-02 RB (without disc)
5,830 ₴
Holder UD7.0.00A-02 RB (without disc)
Біла Церква, Україна
Holder UD7.0.00A-02 RB (without disc)
Yesterday
Spare parts
бульвар М. Грушевського, 13
5,830 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:06
Feedroller knife with hardware for Corn Plant (KMS-8) corn header
375 ₴
Feedroller knife with hardware for Corn Plant (KMS-8) corn header
Біла Церква, Україна
Purpose The feedroller knife is designed for chopping and pulling corn stalks during harvesting with the Corn Plant (KMS-8) corn header. It is mounted on the rotating rollers at the lower part of the feed and is one of the key elements of the cutting-feeding mechanism. Thanks to a quality knife the following is ensured: -effective pulling and chopping of sta...
Yesterday
Spare parts
бульвар М. Грушевського, 13
375 ₴
