Report

6 images

Feedroller knife with hardware for Corn Plant (KMS-8) corn header - 1/6

Feedroller knife with hardware for Corn Plant (KMS-8) corn header - 2/6

Feedroller knife with hardware for Corn Plant (KMS-8) corn header - 3/6

Feedroller knife with hardware for Corn Plant (KMS-8) corn header - 4/6

Feedroller knife with hardware for Corn Plant (KMS-8) corn header

375 ₴

Spare parts

Yesterday 13:06

Україна

Біла Церква Get directions →

бульвар М. Грушевського, 13

1 view

Published 14 hours ago by БІЛОЦЕРКІВМАЗ

375 ₴

In Spare parts category

бульвар М. Грушевського, 13, Біла Церква, Україна

Get directions →

1 item view

Purpose

The feedroller knife is designed for chopping and pulling corn stalks during harvesting with the Corn Plant (KMS-8) corn header. It is mounted on the rotating rollers at the lower part of the feed and is one of the key elements of the cutting-feeding mechanism.

Thanks to a quality knife the following is ensured:

-
effective pulling and chopping of stalks;

-
reduced load on other assemblies;

-
even and stable feeding of the header's auger system.

Important:

Pairwise replacement of knives is recommended to preserve roller rotational balance and minimize vibrations.

Operating principle

While the header is moving, the knives mounted on the rotating rollers:

-
Grab and draw the corn stalk into the nodes of the cutting mechanism.

-
Simultaneously perform partial chopping or splitting of the stalk fiber.

-
The stalk mass is directed to the auger, from where it enters the further transport channel of the combine.

Advantages

High cutting ability

The sharp cutting edge and hardened structure allow easy processing of coarse-stem crops.

Full compatibility with KMS-8

Fits the standard feed rollers of Corn Plant headers without modifications.

Wear resistance and durability

Resistant to mechanical abrasion, impact loads and corrosion.

Supports uniform header operation

Quality knives reduce forces on shafts, decrease bearing wear and energy consumption.

Field of application

-
Corn header KMS-8 Corn Plant

-
Repair or scheduled replacement of feedroller knives

-
Can be used in adapted headers of CLAAS, John Greaves, OROS (specify upon request)

Available: L left and R right.

Published on 2026/10/11

Description

Purpose

Thanks to a quality knife the following is ensured:

-
effective pulling and chopping of stalks;

-
reduced load on other assemblies;

-
even and stable feeding of the header's auger system.

Important:

Pairwise replacement of knives is recommended to preserve roller rotational balance and minimize vibrations.

Operating principle

While the header is moving, the knives mounted on the rotating rollers:

-
Grab and draw the corn stalk into the nodes of the cutting mechanism.

-
Simultaneously perform partial chopping or splitting of the stalk fiber.

-
The stalk mass is directed to the auger, from where it enters the further transport channel of the combine.

Advantages

High cutting ability

The sharp cutting edge and hardened structure allow easy processing of coarse-stem crops.

Full compatibility with KMS-8

Fits the standard feed rollers of Corn Plant headers without modifications.

Wear resistance and durability

Resistant to mechanical abrasion, impact loads and corrosion.

Supports uniform header operation

Quality knives reduce forces on shafts, decrease bearing wear and energy consumption.

Field of application

-
Corn header KMS-8 Corn Plant

-
Repair or scheduled replacement of feedroller knives

-
Can be used in adapted headers of CLAAS, John Greaves, OROS (specify upon request)

Available: L left and R right.

Attributes

Related listings in your area

How far is it? Show listings in my area

Show only listings that are km distanced Show listings

Contact the seller

БІЛОЦЕРКІВМАЗ

592 active listings
Company
Registered for Yesterday
Біла Церква, Київська область, Україна

+380 67 500 ••• ••• Show number Tap to call

Seller's profile All seller items (592) bilotserkivmaz.com.ua

Print Send to friend

Call