Repair kit AG 4-02 for bearing assembly with fasteners, axle and bearings
This is a professional solution for complete service maintenance of the bearing assembly of disc harrows. The kit includes 18 positions (47 parts), allowing comprehensive replacement of the worn axle, bearings, sealing system and disk fastenings. Thanks to the combination of standard AG parts and reinforced UD series seals, this kit provides a significantly higher level of protection for internal elements from abrasive dust and moisture.
No.
Code
Designation
Name
Qty
1
17360
AG 7.2.02-01
Axle
1
2
07235
Bearing 6-7607 GOST 333-71
1
3
07233
Bearing 7508 GOST 333-71
1
4
15926
AG 2.1.40-01
Pressure plate (disk)
1
5
00253
UD 7.0.02
Reinforced seal
2
6
00252
UD 7.0.01
Sealing ring
2
7
19740
AG 7.2.02A
Bushing
1
8
45588
AG 2.0.01
Cap
1
9
00241
AG 2.0.42
Outer ring
1
10
00237
AG 2.0.06
Spacer ring
2
11
00247
AG 2.1.04
Ring
1
12
00753
AG 2.0.05
Nut M30x2
1
13
53176
Washer s 30.01.019
1
14
07372
Split pin 6.3x50.019
1
15
51759
Bolt M10 (class 8.8)
8
16
51664
Nut M10 (class 8.0)
8
17
51792
Washer 10.65G (spring washer)
8
18
51806
Washer 10.01.019 (enlarged)
8
Why this kit is a premium solution:
Integrated UD series protection: Using reinforced seals (gland seals) instead of ordinary rubber rings creates a hermetic barrier, which is critically important for preserving bearing life when operating in heavy soils.
Fully ready for installation: The presence of a reinforced axle (17360) and a complete set of fasteners (bolts 8.8, enlarged washers) allows a turnkey repair, avoiding disk self-loosening during operation.
Economic benefit: The ready repair kit is cheaper than collecting parts separately, and guarantees full compatibility of all elements of the bearing assembly of the AG 7.0.00B tine/stand.
Read morePublished on 2026/10/11
This is a professional solution for complete service maintenance of the bearing assembly of disc harrows. The kit includes 18 positions (47 parts), allowing comprehensive replacement of the worn axle, bearings, sealing system and disk fastenings. Thanks to the combination of standard AG parts and reinforced UD series seals, this kit provides a significantly higher level of protection for internal elements from abrasive dust and moisture.
No.
Code
Designation
Name
Qty
1
17360
AG 7.2.02-01
Axle
1
2
07235
Bearing 6-7607 GOST 333-71
1
3
07233
Bearing 7508 GOST 333-71
1
4
15926
AG 2.1.40-01
Pressure plate (disk)
1
5
00253
UD 7.0.02
Reinforced seal
2
6
00252
UD 7.0.01
Sealing ring
2
7
19740
AG 7.2.02A
Bushing
1
8
45588
AG 2.0.01
Cap
1
9
00241
AG 2.0.42
Outer ring
1
10
00237
AG 2.0.06
Spacer ring
2
11
00247
AG 2.1.04
Ring
1
12
00753
AG 2.0.05
Nut M30x2
1
13
53176
Washer s 30.01.019
1
14
07372
Split pin 6.3x50.019
1
15
51759
Bolt M10 (class 8.8)
8
16
51664
Nut M10 (class 8.0)
8
17
51792
Washer 10.65G (spring washer)
8
18
51806
Washer 10.01.019 (enlarged)
8
Why this kit is a premium solution:
Integrated UD series protection: Using reinforced seals (gland seals) instead of ordinary rubber rings creates a hermetic barrier, which is critically important for preserving bearing life when operating in heavy soils.
Fully ready for installation: The presence of a reinforced axle (17360) and a complete set of fasteners (bolts 8.8, enlarged washers) allows a turnkey repair, avoiding disk self-loosening during operation.
Economic benefit: The ready repair kit is cheaper than collecting parts separately, and guarantees full compatibility of all elements of the bearing assembly of the AG 7.0.00B tine/stand.
Contact the seller
User is offline
- 592 active listings
- Company
- Registered for Yesterday
- Біла Церква, Київська область, Україна