Repair kit M 4-01 complete bearing housing for serviceable stand
This is a specialized solution for upgraded bearing assemblies that support forced lubrication. The kit is designed for “M” series stands (serviceable), which are installed on AG, UDA and AGL units. The presence of an oil nipple and specific seals allows significantly extending the service life of bearings 7508A and 7509A with regular maintenance.
No.
Code
Designation
Name
Qty
1
39160
K0.1.0.01A
Shaft
1
2
24398
7509A
Tapered roller bearing
1
3
24397
7508A
Tapered roller bearing
1
4
44633
KO0.1.0.07B
Hub cover
1
5
07166
1.1-60x85-1
Reinforced seal (gland)
1
6
07174
1.2-55x80-1
Reinforced seal (gland)
1
7
48122
090-095-30
Rubber sealing ring
1
8
07192
1,2C6
Oil nipple (press-type grease nipple)
1
9
39162
AG 2.0.02B
Bushing
1
10
39425
AG 2.0.06B
Spacer ring
1
11
24392
K010.04
Thrust ring
1
12
24395
DIN 472
Circlip 95x3
1
13
39166
AG 2.0.05B
Nut M30x2
1
14
14649
AP 2.0.01
Plug
1
15
41962
Bolt M12x1.25 (class 10.9)
6
16
51686
Washer 12.65G (lock washer)
6
17
07365
Split pin 5x40
1
Why this kit is a premium solution:
Serviceability: Thanks to the integrated oil nipple 1,2C6, the assembly can be greased without disassembly, which increases the bearing life by 2–3 times under severe conditions.
Reinforced disk fastening: M12 bolts with a 1.25 pitch and the highest strength class 10.9 reliably secure the working element when operating at high speeds.
Combined sealing system: The combination of reinforced seals according to GOST 8752-79 and the rubber ring 090-095 creates a reliable hydro-barrier, preventing lubricant washout.
Compatibility: Stands AG 7.0.00 M, UD 7.0.00 M, UD 7.3.00 M, AGL 2,4.02.00 M.
Read morePublished on 2026/10/11
This is a specialized solution for upgraded bearing assemblies that support forced lubrication. The kit is designed for “M” series stands (serviceable), which are installed on AG, UDA and AGL units. The presence of an oil nipple and specific seals allows significantly extending the service life of bearings 7508A and 7509A with regular maintenance.
No.
Code
Designation
Name
Qty
1
39160
K0.1.0.01A
Shaft
1
2
24398
7509A
Tapered roller bearing
1
3
24397
7508A
Tapered roller bearing
1
4
44633
KO0.1.0.07B
Hub cover
1
5
07166
1.1-60x85-1
Reinforced seal (gland)
1
6
07174
1.2-55x80-1
Reinforced seal (gland)
1
7
48122
090-095-30
Rubber sealing ring
1
8
07192
1,2C6
Oil nipple (press-type grease nipple)
1
9
39162
AG 2.0.02B
Bushing
1
10
39425
AG 2.0.06B
Spacer ring
1
11
24392
K010.04
Thrust ring
1
12
24395
DIN 472
Circlip 95x3
1
13
39166
AG 2.0.05B
Nut M30x2
1
14
14649
AP 2.0.01
Plug
1
15
41962
Bolt M12x1.25 (class 10.9)
6
16
51686
Washer 12.65G (lock washer)
6
17
07365
Split pin 5x40
1
Why this kit is a premium solution:
Serviceability: Thanks to the integrated oil nipple 1,2C6, the assembly can be greased without disassembly, which increases the bearing life by 2–3 times under severe conditions.
Reinforced disk fastening: M12 bolts with a 1.25 pitch and the highest strength class 10.9 reliably secure the working element when operating at high speeds.
Combined sealing system: The combination of reinforced seals according to GOST 8752-79 and the rubber ring 090-095 creates a reliable hydro-barrier, preventing lubricant washout.
Compatibility: Stands AG 7.0.00 M, UD 7.0.00 M, UD 7.3.00 M, AGL 2,4.02.00 M.
Contact the seller
User is offline
- 592 active listings
- Company
- Registered for Yesterday
- Біла Церква, Київська область, Україна