2-row garlic and onion planter CHS17 (spoons d 34 mm) for minitractor garlic planter

19,200 ₴
Seeders and seedlings
Today 12:33
Україна
Дніпро Get directions →
вул. Тітова, 26
7 views
Published 9 hours ago by AGROZIP
19,200 ₴
вул. Тітова, 26, Дніпро, Україна
Get directions →
7 item views

Agricultural equipment for growing garlic 2-row CHS17 (spoons enlarged Ø34) is intended for coupling with minitractors. The design of the trailed hitch assembly of the garlic planting device is calculated for three-point fastening and the use of a hydraulic lift system. The hitch assembly of the planter for garlic and onions has double-sided fingers with diameters of 22 and 27 mm. The garlic planter is designed for use with machinery with power from 8 hp. When using the garlic planter with machinery more powerful than 24 hp, a limited warranty is provided. In such cases it is necessary to work with caution, monitoring the load on the units of the garlic and onion planter.
Purpose and conditions of use of the garlic seeder CHS17
The garlic seeder is intended for planting garlic cloves, single-clove garlic and sets of onions on previously cultivated and prepared soils, with soil moisture no more than 30%. For planting with the garlic planter it is necessary to use calibrated planting material sized 25-35 mm. Features of the garlic planter design The garlic planter has a sectional design. Each row of the garlic planter uses a separate section with a conveyor and a hopper for planting material. The capacity of one hopper is 10 liters. The drive of the dosing mechanism is carried out from the support-drive wheels of the garlic seeder. The CHS17 garlic planter uses a single-shaft drive system for the dosing mechanism. Planting pitch in the row: 110 mm, 125 mm and 140 mm, is adjusted by changing the gear ratio on the chain gearbox of the garlic planter. To compensate for the chain length in the CHS17 garlic planter a tensioner is used. The coulter and furrow closers are adjustable in the garlic planter. Planting depth of the garlic planter - 60-80 mm. Row spacing is adjustable in the range from 200 to 530 mm. Track width of the CHS17 garlic planter – 1400 mm. For convenience of connection the CHS17 garlic seeder is equipped with two removable handles. During operation the handles must be detached.
Contents of the garlic and onion seeder: hopper – 2 pcs.; conveyor – 2 pcs.; frame – 1 pc.; support-drive wheel – 2 pcs.; chain drive – 1 pc. Additional equipment: row marker; chain with double-sided spoons (CHSd5). Overall dimensions – 1580*1200*930 mm.
Weight of the CHS17 garlic planter – 67.9 kg. Dear buyers! The design, color and package contents of the "Krychkov" garlic planter may not match the photo on the official website. Before purchase of the garlic planter clarify the parameters and characteristics important to you. Before shipping the garlic planter be sure to agree with the manager the compatibility of the equipment with your tractor.

Weight, kg: 68
Aggregating vehicle: minitractor
Power of aggregating vehicle, hp: from 6
Type of coulter: wedge (cutting)
Type of seeding mechanism: drum
Planting pitch in row, mm: 110/125/140
Depth of seed placement, mm: from 60 to 80
Rate of planting garlic cloves, pcs: 7-10 per 1 meter
Number of rows sown at once, pcs: 2
Drive of the seed feed dosing mechanism: from the ground-engaging wheels
Hopper volume for seed, l: 10 (2 hoppers)
Inter-row interval, mm: from 200 to 530
Spoon diameter, mm: 34
Manufacturer: Krychkov

Read more

Published on 2026/10/11

Description

Agricultural equipment for growing garlic 2-row CHS17 (spoons enlarged Ø34) is intended for coupling with minitractors. The design of the trailed hitch assembly of the garlic planting device is calculated for three-point fastening and the use of a hydraulic lift system. The hitch assembly of the planter for garlic and onions has double-sided fingers with diameters of 22 and 27 mm. The garlic planter is designed for use with machinery with power from 8 hp. When using the garlic planter with machinery more powerful than 24 hp, a limited warranty is provided. In such cases it is necessary to work with caution, monitoring the load on the units of the garlic and onion planter.
Purpose and conditions of use of the garlic seeder CHS17
The garlic seeder is intended for planting garlic cloves, single-clove garlic and sets of onions on previously cultivated and prepared soils, with soil moisture no more than 30%. For planting with the garlic planter it is necessary to use calibrated planting material sized 25-35 mm. Features of the garlic planter design The garlic planter has a sectional design. Each row of the garlic planter uses a separate section with a conveyor and a hopper for planting material. The capacity of one hopper is 10 liters. The drive of the dosing mechanism is carried out from the support-drive wheels of the garlic seeder. The CHS17 garlic planter uses a single-shaft drive system for the dosing mechanism. Planting pitch in the row: 110 mm, 125 mm and 140 mm, is adjusted by changing the gear ratio on the chain gearbox of the garlic planter. To compensate for the chain length in the CHS17 garlic planter a tensioner is used. The coulter and furrow closers are adjustable in the garlic planter. Planting depth of the garlic planter - 60-80 mm. Row spacing is adjustable in the range from 200 to 530 mm. Track width of the CHS17 garlic planter – 1400 mm. For convenience of connection the CHS17 garlic seeder is equipped with two removable handles. During operation the handles must be detached.
Contents of the garlic and onion seeder: hopper – 2 pcs.; conveyor – 2 pcs.; frame – 1 pc.; support-drive wheel – 2 pcs.; chain drive – 1 pc. Additional equipment: row marker; chain with double-sided spoons (CHSd5). Overall dimensions – 1580*1200*930 mm.
Weight of the CHS17 garlic planter – 67.9 kg. Dear buyers! The design, color and package contents of the "Krychkov" garlic planter may not match the photo on the official website. Before purchase of the garlic planter clarify the parameters and characteristics important to you. Before shipping the garlic planter be sure to agree with the manager the compatibility of the equipment with your tractor.

Weight, kg: 68
Aggregating vehicle: minitractor
Power of aggregating vehicle, hp: from 6
Type of coulter: wedge (cutting)
Type of seeding mechanism: drum
Planting pitch in row, mm: 110/125/140
Depth of seed placement, mm: from 60 to 80
Rate of planting garlic cloves, pcs: 7-10 per 1 meter
Number of rows sown at once, pcs: 2
Drive of the seed feed dosing mechanism: from the ground-engaging wheels
Hopper volume for seed, l: 10 (2 hoppers)
Inter-row interval, mm: from 200 to 530
Spoon diameter, mm: 34
Manufacturer: Krychkov

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 438 active listings
  • Company
  • Registered for Today
  • Дніпро, Дніпропетровська область, Україна
Recently viewed
AGROZIP AGROZIP Today 12:32
Pro Soil treatment Дніпро Today 12:32
3-section inter-row cultivator Wirax (with blades) for mini tractor
15,800 ₴
3-section inter-row cultivator Wirax (with blades) for mini tractor
Дніпро, Україна
PurposeThe Wirax cultivator is intended for inter-row cultivation of row crops such as potatoes, corn, sunflower. It is used for loosening the soil, destroying weeds and earthing up the rows, which contributes to improved aeration and moisture retention.Construction and principle of operationThe cultivator consists of three working sections equipped with ear...
Today Soil treatment вул. Тітова, 26
15,800 ₴
AGROZIP AGROZIP Today 12:33
2-row garlic and onion planter CHS15 (spoons d 24.5 mm) for mini-tractor garlic planter
19,200 ₴
2-row garlic and onion planter CHS15 (spoons d 24.5 mm) for mini-tractor garlic planter
Дніпро, Україна
2-row garlic planter CHS15 (standard spoons Ø24.5) is designed to be used with mini-tractors. The hitch assembly of the CHS15 garlic planter is designed for three-point mounting and use of a hydraulic lift system. The hitch assembly of the garlic planter has double-sided pins with diameters of 22 and 27 mm. The garlic planter is intended for use with equipme...
Today Seeders and seedlings вул. Тітова, 26
19,200 ₴
AGROZIP AGROZIP Today 12:33
Pro Sprayers Дніпро Today 12:33
Field boom sprayer Jar Met (JarMet) 200 L / 8 m (bent frame)
29,500 ₴
Field boom sprayer Jar Met (JarMet) 200 L / 8 m (bent frame)
Дніпро, Україна
Tractive vehicle: mini tractorPower of tractive vehicle, hp: from 18Tank capacity, L: 200Boom type: mechanical lift, unfolds manuallyPump type: diaphragm-piston "Tolveri"Pump flow rate, L/min: 120Nozzle type: single with shut-off (*optional configuration with triple nozzles)Boom length, m: 8Hand wash: noneManufacturer: Jar-Met
Today Sprayers вул. Тітова, 26
29,500 ₴
AGROZIP AGROZIP Today 12:33
3-row garlic and onion planter CHS16 (cups Ø24.5 mm) garlic planter for mini tractor
25,200 ₴
3-row garlic and onion planter CHS16 (cups Ø24.5 mm) garlic planter for mini tractor
Дніпро, Україна
3-row garlic planter CHS16 (standard cups Ø24.5) is intended for coupling with mini tractors. The design of the hitch assembly is calculated for three-point mounting and the use of a hydraulic lift system. The hitch assembly has double-sided pins with diameters of 22 and 27 mm. The garlic planter is designed for use with equipment with power from 12 hp. When...
Today Seeders and seedlings вул. Тітова, 26
25,200 ₴
AGROZIP AGROZIP Today 12:26
Pro Sprayers Дніпро Today 12:26
Field sprayer (Polish tank Marseplast 1000 liters, 16 meters, stabilizer, pump
56,000 ₴
Field sprayer (Polish tank Marseplast 1000 liters, 16 meters, stabilizer, pump
Дніпро, Україна
Reliable functional tractor-mounted sprayer Polmark 1000 liters (boom 16 meters, stabilizer) is designed for high operational loads, intended for spraying mineral fertilizers and pesticides in the form of liquid solutions. In a single pass it can treat an area up to 16 meters wide, evenly distributing substances across the field surface. The large tank insta...
Today Sprayers вул. Тітова, 26
56,000 ₴
AGROZIP AGROZIP Today 12:32
Pro Soil treatment Дніпро Today 12:32
Mounted disc plough 1.5 m with roller - clod breaker AGD for tractor Bomet from 40 hp
86,000 ₴
Mounted disc plough 1.5 m with roller - clod breaker AGD for tractor Bomet from 40 hp
Дніпро, Україна
Agregating vehicle: tractor Power of aggregating vehicle, hp: from 30 Manufacturer: Bomet Soil working depth, mm: 200 Working width, m: 1.5 Presence of soil-working roller (clod breaker): yes Number of disc rows, pcs: 2 Weight, kg: 530 Disc diameter, mm: 600 Number of discs in one row, pcs: 4
Today Soil treatment вул. Тітова, 26
86,000 ₴
AGROZIP AGROZIP Today 12:26
Two-row garlic and onion planter Bizon-2mb for walk-behind tractor garlic planter
16,000 ₴
Two-row garlic and onion planter Bizon-2mb for walk-behind tractor garlic planter
Дніпро, Україна
High-precision 2-row garlic planter Bizon CHS-2 is designed for single-point mounting of the walk-behind tractor type. An excellent solution for efficient garlic planting: the Bizon CHS-2 garlic planter combines excellent quality and ease of use. The Bizon CHS-2 garlic planter is an indispensable mounted tool for gardeners and farmers who seek high productiv...
Today Seeders and seedlings вул. Тітова, 26
16,000 ₴
AGROZIP AGROZIP Today 12:33
Potato digger for tractor, vibrating, Bomet, rear discharge
31,000 ₴
Potato digger for tractor, vibrating, Bomet, rear discharge
Дніпро, Україна
Tractor unit: mini tractorPower of tractor unit, hp: from 24Number of rows dug at once: 1Digging depth, mm: 200Blade metal thickness, mm: 5Manufacturer: BometWeight, kg: 135Working width, m: 0.45
Today Machines to harvest and process potatoes вул. Тітова, 26
31,000 ₴
AGROZIP AGROZIP Today 12:32
Pro Soil treatment Дніпро Today 12:32
Heavy tooth harrow (section) BZV
4,500 ₴
Heavy tooth harrow (section) BZV
Дніпро, Україна
Implement-coupling vehicle: walk-behind tractor Power of coupling vehicle, hp: from 10 Weight, kg: 40
Today Soil treatment вул. Тітова, 26
4,500 ₴
Call