3-row garlic and onion planter CHS16 (cups Ø24.5 mm) garlic planter for mini tractor

25,200 ₴
Seeders and seedlings
Today 12:33
Україна
Дніпро Get directions →
вул. Тітова, 26
7 views
Published 11 hours ago by AGROZIP
25,200 ₴
вул. Тітова, 26, Дніпро, Україна
Get directions →
7 item views

3-row garlic planter CHS16 (standard cups Ø24.5) is intended for coupling with mini tractors. The design of the hitch assembly is calculated for three-point mounting and the use of a hydraulic lift system.
The hitch assembly has double-sided pins with diameters of 22 and 27 mm. The garlic planter is designed for use with equipment with power from 12 hp. When using the garlic planter with equipment more powerful than 24 hp, a limited warranty is provided. In such cases you must operate with caution, monitoring the load on the planter units.
Purpose and operating conditions
The garlic planter is intended for planting garlic cloves, single-clove garlic and sets of onion seedlings on pre-tilled and prepared soils, with soil moisture no more than 30%. For planting, calibrated planting material sized 15-25 mm must be used.
Design features of the garlic planter
The garlic planter has a sectional design. Each row uses a separate section with a conveyor and a hopper for planting material. The capacity of one hopper is 10 liters.
The drive of the metering mechanism is carried out from the ground-driven wheels. This product uses a single-shaft drive system for the metering mechanism. Row planting spacing: 110 mm, 125 mm and 140 mm, is adjusted by changing the gear ratio on the chain gearbox. A tensioner is used to compensate for chain length. The coulter and closing wheels are adjustable. Planting depth - 60-80 mm. Row spacing is adjustable from 200 to 400 mm.
Track width – 1400 mm.
For convenience of connection the planter is equipped with two removable handles. During operation the handles must be detached.
Completeness:
hopper – 3 pcs.; conveyor – 3 pcs.; frame – 1 pc.; ground-drive wheel – 2 pcs.; chain drive – 1 pc. Additional equipment:
row marker. Overall dimensions – 1580*1200*930 mm.
Weight – 81.2 kg.
Dear buyers! The design, color and package contents of products manufactured by "Kryuchkov" may not match the photos on the official website. Before purchase, clarify the parameters and characteristics important to you.
Before dispatching the garlic planter be sure to agree with the manager on the compatibility of the equipment with your mini tractor.

Aggregating vehicle: mini tractor
Power of aggregating vehicle, hp: from 8
Type of coulter: keel-shaped (anchor)
Type of seeding mechanism: drum
Cup diameter, mm: 24.5
Seeding step in row, mm: 110/125/140
Seeding depth, mm: from 60 to 80
Seeding rate of garlic cloves, pcs: 7-10 per 1 meter
Drive of the seed metering mechanism: from ground wheels
Number of rows sown simultaneously, pcs: 3
Hopper volume for seed, l: 10 (3 hoppers)
Weight, kg: 81
Inter-row interval, mm: from 200 to 400
Manufacturer: Kryuchkov

Read more

Published on 2026/10/11

Description

3-row garlic planter CHS16 (standard cups Ø24.5) is intended for coupling with mini tractors. The design of the hitch assembly is calculated for three-point mounting and the use of a hydraulic lift system.
The hitch assembly has double-sided pins with diameters of 22 and 27 mm. The garlic planter is designed for use with equipment with power from 12 hp. When using the garlic planter with equipment more powerful than 24 hp, a limited warranty is provided. In such cases you must operate with caution, monitoring the load on the planter units.
Purpose and operating conditions
The garlic planter is intended for planting garlic cloves, single-clove garlic and sets of onion seedlings on pre-tilled and prepared soils, with soil moisture no more than 30%. For planting, calibrated planting material sized 15-25 mm must be used.
Design features of the garlic planter
The garlic planter has a sectional design. Each row uses a separate section with a conveyor and a hopper for planting material. The capacity of one hopper is 10 liters.
The drive of the metering mechanism is carried out from the ground-driven wheels. This product uses a single-shaft drive system for the metering mechanism. Row planting spacing: 110 mm, 125 mm and 140 mm, is adjusted by changing the gear ratio on the chain gearbox. A tensioner is used to compensate for chain length. The coulter and closing wheels are adjustable. Planting depth - 60-80 mm. Row spacing is adjustable from 200 to 400 mm.
Track width – 1400 mm.
For convenience of connection the planter is equipped with two removable handles. During operation the handles must be detached.
Completeness:
hopper – 3 pcs.; conveyor – 3 pcs.; frame – 1 pc.; ground-drive wheel – 2 pcs.; chain drive – 1 pc. Additional equipment:
row marker. Overall dimensions – 1580*1200*930 mm.
Weight – 81.2 kg.
Dear buyers! The design, color and package contents of products manufactured by "Kryuchkov" may not match the photos on the official website. Before purchase, clarify the parameters and characteristics important to you.
Before dispatching the garlic planter be sure to agree with the manager on the compatibility of the equipment with your mini tractor.

Aggregating vehicle: mini tractor
Power of aggregating vehicle, hp: from 8
Type of coulter: keel-shaped (anchor)
Type of seeding mechanism: drum
Cup diameter, mm: 24.5
Seeding step in row, mm: 110/125/140
Seeding depth, mm: from 60 to 80
Seeding rate of garlic cloves, pcs: 7-10 per 1 meter
Drive of the seed metering mechanism: from ground wheels
Number of rows sown simultaneously, pcs: 3
Hopper volume for seed, l: 10 (3 hoppers)
Weight, kg: 81
Inter-row interval, mm: from 200 to 400
Manufacturer: Kryuchkov

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 438 active listings
  • Company
  • Registered for Today
  • Дніпро, Дніпропетровська область, Україна
Recently viewed
AGROZIP AGROZIP Today 12:26
Three-disc rotary mower for heavy motor-block KR-06
10,000 ₴
Three-disc rotary mower for heavy motor-block KR-06
Дніпро, Україна
The lightened rotary mower for a motor-tractor KR-06 has a simple reliable design and features good performance. Suitable for work on any areas, it cleanly mows dense thick vegetation, can be used for cutting dry wood, reed, corn and tall mixed grasses. It is mounted using the front suspension system on equipment with power of at least 12 horsepower. Thanks ...
Today Collecting technique for hay, feed вул. Тітова, 26
10,000 ₴
AGROZIP AGROZIP Today 12:31
Pro Spare parts Дніпро Today 12:31
Polish pump for TOLVERI-120 sprayer
5,500 ₴
Polish pump for TOLVERI-120 sprayer
Дніпро, Україна
Polish diaphragm-piston pump designed for trailed boom sprayers with boom lengths from 8 to 16 m. Technical data: Lightweight. Long operating time without cooling. Resistant to fertilizer solutions and UAN. Easy to maintain. Low heat generation, European manufacturing quality and precise technologies ensure long service life.
Today Spare parts вул. Тітова, 26
5,500 ₴
AGROZIP AGROZIP Today 12:32
Four-row planter CSN-4 for garlic and onions for motor-tractor garlic planter
28,900 ₴
Four-row planter CSN-4 for garlic and onions for motor-tractor garlic planter
Дніпро, Україна
Aggregating vehicle: motor-tractorPower of aggregating vehicle, hp: from 12Weight, kg: 94Type of coulter: keel-shaped (anchor)Type of seeding mechanism: drumSeeding rate of garlic cloves, pcs: 7-10 per 1 meterInter-row spacing, mm: from 200 to 580Drive of the seed feed dosing mechanism: from ground-engaging wheelsNumber of rows seeded simultaneously, pcs: 4S...
Today Seeders and seedlings вул. Тітова, 26
28,900 ₴
AGROZIP AGROZIP Today 12:33
2-row garlic and onion planter CHS17 (spoons d 34 mm) for minitractor garlic planter
19,200 ₴
2-row garlic and onion planter CHS17 (spoons d 34 mm) for minitractor garlic planter
Дніпро, Україна
Agricultural equipment for growing garlic 2-row CHS17 (spoons enlarged Ø34) is intended for coupling with minitractors. The design of the trailed hitch assembly of the garlic planting device is calculated for three-point fastening and the use of a hydraulic lift system. The hitch assembly of the planter for garlic and onions has double-sided fingers with dia...
Today Seeders and seedlings вул. Тітова, 26
19,200 ₴
AGROZIP AGROZIP Today 12:26
Pro Sprayers Дніпро Today 12:26
Mounted tractor sprayer Wirax 800 liters (boom 14 meters)
45,000 ₴
Mounted tractor sprayer Wirax 800 liters (boom 14 meters)
Дніпро, Україна
Practical specialized equipment for surface spraying of liquid mineral fertilizers and pesticides - mounted tractor sprayer Wirax 800 liters (boom 14 meters) is effectively used on large sowing areas for treating various crops. The mounted tractor sprayer is installed on a reinforced rounded frame made of metal profile, coated with anti-corrosion powder pain...
Today Sprayers вул. Тітова, 26
45,000 ₴
AGROZIP AGROZIP Today 12:33
Vibratory potato digger KTN-1VN single-row tractor-mounted
11,300 ₴
Vibratory potato digger KTN-1VN single-row tractor-mounted
Дніпро, Україна
Why choose this model Digging quality. Thanks to a 50 cm working width and a vibratory mechanism, the digger thoroughly sieves the soil, facilitates adjustment of the digger in the row, which significantly reduces harvest collection time. Work quality. Tubers remain intact, without damage, because the digger gently sifts the soil through the screen. Durable ...
Today Machines to harvest and process potatoes вул. Тітова, 26
11,300 ₴
AGROZIP AGROZIP Today 12:32
Rotary self-propelled garden mower KSR-0.6
57,500 ₴
Rotary self-propelled garden mower KSR-0.6
Дніпро, Україна
Mowing height, mm: 50Weight, kg: 92Number of working blades, pcs: 4Aggregating vehicle: self-propelledMowing width, mm: 600
Today Collecting technique for hay, feed вул. Тітова, 26
57,500 ₴
Call