Solar-Tech

Buffer tank made of black steel VTA-1 is equipped with two heat exchangers. A heat exchanger is installed in the lower part, and in the upper part a stainless steel domestic hot water heat exchanger for producing hot water for household needs. The main feature of this model is the ability to connect a large number of heat energy sources, which use both fossi...

Altek AC-VG-50 - a heliosystem based on solar vacuum collectors designed to produce hot water at a specified temperature by absorbing solar radiation, converting it into heat, storing it and delivering it to the consumer. The solar vacuum collector provides collection of solar radiation in any weather, regardless of the outside temperature. The absorption co...

Challenger G12 series batteries are sealed gel batteries with a PE-type separator and a safety valve (VRLA) that require no maintenance. This series is designed for cyclic operation (up to 400 cycles at 100% DOD). The batteries are resistant to deep discharge. Thanks to a large reserve of electrolyte, they have high heat capacity and are not prone to thermal...

The SC-LH2 vacuum collector is used in closed-type solar systems with a pump station. The efficiency of the solar collector reaches 87-92%. Due to design features calculated for our climatic conditions, the SC-LH2 has maximum performance. It has high performance in conditions of low solar insolation, providing the collection of the sun’s energy regardless of...

The vacuum collector AXIOMA AX-30HP24 is used in all-season water heating systems. This solar thermal collector is effective for year-round use in all regions of Ukraine. The vacuum tubes are coated with a three-layer high-selectivity coating ALN-AIN-SS/Cu. The solar collector is equipped with an enlarged condenser with a diameter of 24 mm, which provides a ...

Altek AP-TL-30 – thermosiphon solar system from the Ukrainian brand Altek with a 300-liter tank. The inner tank is made of stainless steel SUS316L, and the outer one is made of black metal with powder coating, reinforced frame with powder coating, 5 L filler tank. The main element of this collector model is vacuum tubes made of transparent borosilicate glass...

Vacuum tubular solar collectors Sunrain TZ58/1800-30R1A (previously sold in Ukraine under the Sunraine brand) are among the most efficient types of solar collectors. These collectors are best suited for use in moderate ambient temperatures in water supply systems where a water temperature of 50-95 ºC is required. Vacuum solar collectors have a selective abso...

Drainback heliosystem protection technology The drainback technology is designed to protect the heliosystem from boiling or freezing of the heat transfer fluid and from formation of airlocks. Overheating and presence of air in the system are the main causes of failures that can lead to serious damage. The system consists of special solar collectors, a specia...

The vacuum collector SC-LH1 is used in closed-type solar systems with a pumping station. The efficiency of the solar collector reaches 87%. It has high performance under low solar insolation conditions, providing solar energy collection regardless of weather conditions, absorbing up to 90% of the sun's energy. The frame is made of high-quality aluminum with ...

Buffer tank made of black steel VTA-1 is equipped with two heat exchangers. A heat exchanger is installed in the lower part, and in the upper part a stainless steel domestic hot water heat exchanger for producing hot water for household needs. The main distinction of this model is the ability to connect a large number of heat energy sources that use both fos...

Buffer tank made of black steel VTA-1 is equipped with two heat exchangers. In the lower part a heat exchanger is installed, and in the upper part a stainless steel domestic hot water (DHW) heat exchanger for preparing hot water for household needs. The main distinguishing feature of this model is the ability to connect a large number of heat energy sources ...

Buffer tank made of black steel VTA-1 is equipped with two heat exchangers. A heat exchanger is installed in the lower part, and in the upper part a stainless steel domestic hot water heat exchanger for preparing hot water for household needs. The main distinction of this model is the ability to connect a large number of heat energy sources, which use both f...