This site uses cookies to ensure proper operation, personalization, analytics, and advertising. You can accept all cookies, decline non-essential cookies, or customize your settings. Learn more in our Privacy Policy.
Always active
Essential for core functionality, security, and authentication. Always active.
Remember your selected language, location preferences, and display options.
Help us measure traffic and user interactions to improve the site (Google Analytics).
Used to display relevant advertising and measure campaign performance (Google Ads).
Oversized segment mower for mini tractor KSN-1.4 (with ZRP) is successfully used on flat, debris-free areas; designed for clearing plots of natural herbs, mowing sown forage crops, cutting small shrubs, weeds and lodged high-yield grasses. It features a simple convenient design, performs high-quality mowing of dense thick grass, with subsequent laying of plant mass into windrows for drying and collection.
The cutting unit fitted on the segment mower for mini tractors is a steel bed 140 cm long with toothed segment knives that move in a reciprocating rhythm. Grass that gets between the teeth of the metal plates is quickly cut, leaving stubble 6–8 cm high. The steel segment knives have convenient mountings, allowing worn plates to be easily removed and new elements installed. Special shoes (inner and outer) are installed at the edges of the bed for free sliding over the surface. The outer shoe is equipped with a discharge board that rakes the mown mass to the side in the direction of travel.
The segment mower is mounted on a mini tractor with 12–24 horsepower using a rear three-point hitch system. It is driven to working condition from the PTO via a driveshaft, which transmits knife motion through a pulley-eccentric and V-belt drive that also performs a safety function. If wire or any other object gets under the working knives, belt slippage reliably protects the knives from breakage.
The wooden connecting rod that drives the knives also serves as additional protection — if during operation the segment mower for mini tractor KSN-1.4 (with ZRP) hits a stump or stone, the safety latch installed on the rod pushes the cutter back, allowing the obstacle to be bypassed. The unit achieves maximum productivity of 0.8–1.3 ha/h when working on flat plots. A spare cutting bed is included in the package.
Advantages of the segment mower for mini tractor KSN-1.4 (with ZRP):
The cutting block is fitted with shoes.
The connecting rod and drive have safety functions.
Works effectively in any weather conditions.
Has good productivity.
Aggregating vehicle: mini tractor
Cutting width, mm: 1400
Cutting height, mm: 60 - 80
Weight, kg: 105
Power of aggregating vehicle, hp: from 12
Oversized segment mower for mini tractor KSN-1.4 (with ZRP) is successfully used on flat, debris-free areas; designed for clearing plots of natural herbs, mowing sown forage crops, cutting small shrubs, weeds and lodged high-yield grasses. It features a simple convenient design, performs high-quality mowing of dense thick grass, with subsequent laying of plant mass into windrows for drying and collection.
The cutting unit fitted on the segment mower for mini tractors is a steel bed 140 cm long with toothed segment knives that move in a reciprocating rhythm. Grass that gets between the teeth of the metal plates is quickly cut, leaving stubble 6–8 cm high. The steel segment knives have convenient mountings, allowing worn plates to be easily removed and new elements installed. Special shoes (inner and outer) are installed at the edges of the bed for free sliding over the surface. The outer shoe is equipped with a discharge board that rakes the mown mass to the side in the direction of travel.
The segment mower is mounted on a mini tractor with 12–24 horsepower using a rear three-point hitch system. It is driven to working condition from the PTO via a driveshaft, which transmits knife motion through a pulley-eccentric and V-belt drive that also performs a safety function. If wire or any other object gets under the working knives, belt slippage reliably protects the knives from breakage.
The wooden connecting rod that drives the knives also serves as additional protection — if during operation the segment mower for mini tractor KSN-1.4 (with ZRP) hits a stump or stone, the safety latch installed on the rod pushes the cutter back, allowing the obstacle to be bypassed. The unit achieves maximum productivity of 0.8–1.3 ha/h when working on flat plots. A spare cutting bed is included in the package.
Advantages of the segment mower for mini tractor KSN-1.4 (with ZRP):
The cutting block is fitted with shoes.
The connecting rod and drive have safety functions.
Works effectively in any weather conditions.
Has good productivity.
Aggregating vehicle: mini tractor
Cutting width, mm: 1400
Cutting height, mm: 60 - 80
Weight, kg: 105
Power of aggregating vehicle, hp: from 12
Attributes
Related listings in your area
How far is it?Show listings in my area
Show only listings that arekm distancedShow listings
Description of rake “Sonechko” GVR-4: The “Sonechko” rake can be used both for tedding (turning) hay and for raking hay into a windrow. These versatile rakes can be used on tractors, power tillers and mini tractors based on a power tiller. Attachment to the unit is done via the appropriate mounting (purchased separately). Because the discs are mounted on hin...
YesterdayCollecting technique for hay, feedвул. Надії Алексєєнко, 70
Description of the segment-finger mower KSN-1.8 with ZRP: The mounted segment-finger mower is used when mowing various types of grasses for green mass and hay, both sown and naturally growing. It provides high quality and clean cutting. Neatly, without scattering to the sides, it lays the mown grass mass into a swath. It is used mainly on flat areas — the fl...
YesterdayCollecting technique for hay, feedвул. Надії Алексєєнко, 70
Description of the sickle-bar segment-finger mower KSN-1.6 with ZRP: The mounted segment-finger mower is used when mowing for green mass and for hay of various types of grasses, both sown and naturally grown. It provides high quality and clean cutting. Neatly, without scattering to the sides, it lays the mown grass mass into a swath. It is used mainly on fla...
YesterdayCollecting technique for hay, feedвул. Надії Алексєєнко, 70
Description of the segmented-finger mower KSN-1.4 with ZRP: The mounted segmented-finger mower is used when cutting for green mass and for hay of various types of grasses, both sown and naturally grown. It provides high quality and clean cutting. Neatly, without scattering to the sides, it lays the cut grass mass into swaths. It is used mainly on flat plots ...
YesterdayCollecting technique for hay, feedвул. Надії Алексєєнко, 70
Description of the KR-02U rotary mower The mounted rotary mower is intended for mowing low-stem green mass in household plots, as well as on non-rocky cultivated fields with flat and variable terrain. It allows adjustment of the cutting height of the mown grass. The mower design provides two positions: working and transport. In the transport position, the mo...
YesterdayCollecting technique for hay, feedвул. Надії Алексєєнко, 70
Description of the rotary mower KR-04 The mounted rotary mower is used for mowing various types of grasses for green mass and hay, both sown and naturally grown. It provides high quality and clean cutting. Without scattering or gaps at the sides, it lays the mown grass mass into a windrow. It is mainly used on flat areas. Travel speed 6-10 km/h. The belt dri...
YesterdayCollecting technique for hay, feedвул. Надії Алексєєнко, 70
Description of the rotary mower KR-02U The mounted rotary mower is designed for cutting low-stem green mass on household plots, as well as on non-stony cultivated fields with flat and variable terrain relief. Allows adjusting the cutting height of the mown grass. The mower design provides two positions: working and transport. In the transport position the mo...
YesterdayCollecting technique for hay, feedвул. Надії Алексєєнко, 70
Description of the KR-04 rotary mower The mounted rotary mower is used for mowing various types of grasses for green mass and hay, both sown and naturally grown. It provides high quality and clean mowing. Without scattering or gaps at the sides, it lays the mown grass mass into a windrow. It is used mainly on flat plots. Travel speed 6–10 km/h. The belt driv...
YesterdayCollecting technique for hay, feedвул. Надії Алексєєнко, 70
Drive: From the power take-off shaft Working width, mm: 850 Cutting height, mm: 40-80 Rotational speed, revolutions per minute: 3000-3600 Weight, kg: 27
YesterdayCollecting technique for hay, feedвул. Надії Алексєєнко, 70
The rotary mower KR-1.1 SHIP is high-quality mounted equipment designed for motor-tractors, ideal for mowing grassy vegetation on flat and uneven plots. Due to its technical characteristics, this model provides efficient and productive operation, making it an indispensable helper in agriculture.Main advantages of the KR-1.1 SHIP 1100 mm working width allows ...
YesterdayCollecting technique for hay, feedвул. Тітова, 26
Oh, friend, this is a real treasure for the farm! Imagine: you mount it on your minitractor, engage the rear PTO — and the mower works like a reliable partner. This two-rotor mounted mower is simply made for your fields. Whether grass, alfalfa, or thick weeds — it lays everything down evenly, as if with a ruler! Two rotors with 8 blades work so fast that in ...
YesterdayCollecting technique for hay, feedвул. Тітова, 26
Fan rake for walk-behind tractor GR2 is used for collecting finished dry hay on medium and large areas. The rake gathers dried grass and forms windrows over a working width of 150 cm, achieving productivity up to 2 ha/h on terrain with varying relief. The fan rake attaches to a walk-behind tractor with power from 22 horsepower. The equipment frame is fixed t...
YesterdayCollecting technique for hay, feedвул. Тітова, 26
Machine for removing feathers from chickens, broilers, ducks SO-550K - a special device designed for automatic removal of plumage from large domestic poultry. In one work cycle (15-20 sec) the unit neatly plucks 2-4 carcasses with a total weight of up to 10 kg, removing up to 90-98% of the feathers from each item. This machine for removing feathers from chic...