Washer 30 AG 2.0.03
22 ₴
Published 14 hours ago by БІЛОЦЕРКІВМАЗ
22 ₴
In Other category
бульвар М. Грушевського, 13, Біла Церква, Україна
Get directions →
3 item views
The washer 30 AG 2.0.03 is an integral part of the disc harrow assemblies of models AG, AGP, UDA, which were manufactured by the company “Bilotserkivmaz” until 2014. It is used to ensure reliable fastening and even distribution of load between the disc fastening units, as well as to protect other elements from premature wear. Thanks to precise dimensions and durable material, the washer contributes to the stable operation of the unit in demanding field conditions.
Main design features:
-
Size and specification: Corresponds to the designation 30 AG 2.0.03, which indicates the size type and compatibility with specific harrow models.
-
Material: Manufactured from high-strength steel that has high wear resistance and withstands prolonged dynamic loads.
-
Function in the mechanism: Serves as a support or spacer element that reduces friction and wear between the parts of the fastening assembly.
-
Compatibility: Intended for harrows produced up to 2014, in particular the AG, AGP, UDA models manufactured by Bilotserkivmaz.
Advantages:
-
Strength and reliability: The washer has sufficient rigidity to ensure stable equipment operation even under difficult operating conditions.
-
Protection of units: Prevents premature wear of connected elements, which extends the service life of the equipment.
-
Resistance to aggressive environments: Withstands the effects of moisture, dust, dirt and temperature fluctuations well.
-
Dimensional accuracy: Ensures reliable contact with other components of the assembly, helping to reduce play and vibration.
Technical specifications:
-
Type: Support washer
-
Marking: 30 AG 2.0.03
-
Material: Structural steel (usually with a protective coating or heat treatment)
-
Application: Fastening assemblies of disc harrows AG/AGP/UDA
-
Compatibility: Disc harrows manufactured by Bilotserkivmaz (until 2014)
Application:
The washer 30 AG 2.0.03 is used in those harrow assemblies where it is necessary to provide fixation or spacing between structural elements such as bearing housings, hubs or discs. Its design provides effective load distribution, reduced wear and long service life even under conditions of increased loads and aggressive external environments.
Read morePublished on 2026/10/11
Description
The washer 30 AG 2.0.03 is an integral part of the disc harrow assemblies of models AG, AGP, UDA, which were manufactured by the company “Bilotserkivmaz” until 2014. It is used to ensure reliable fastening and even distribution of load between the disc fastening units, as well as to protect other elements from premature wear. Thanks to precise dimensions and durable material, the washer contributes to the stable operation of the unit in demanding field conditions.
Main design features:
-
Size and specification: Corresponds to the designation 30 AG 2.0.03, which indicates the size type and compatibility with specific harrow models.
-
Material: Manufactured from high-strength steel that has high wear resistance and withstands prolonged dynamic loads.
-
Function in the mechanism: Serves as a support or spacer element that reduces friction and wear between the parts of the fastening assembly.
-
Compatibility: Intended for harrows produced up to 2014, in particular the AG, AGP, UDA models manufactured by Bilotserkivmaz.
Advantages:
-
Strength and reliability: The washer has sufficient rigidity to ensure stable equipment operation even under difficult operating conditions.
-
Protection of units: Prevents premature wear of connected elements, which extends the service life of the equipment.
-
Resistance to aggressive environments: Withstands the effects of moisture, dust, dirt and temperature fluctuations well.
-
Dimensional accuracy: Ensures reliable contact with other components of the assembly, helping to reduce play and vibration.
Technical specifications:
-
Type: Support washer
-
Marking: 30 AG 2.0.03
-
Material: Structural steel (usually with a protective coating or heat treatment)
-
Application: Fastening assemblies of disc harrows AG/AGP/UDA
-
Compatibility: Disc harrows manufactured by Bilotserkivmaz (until 2014)
Application:
The washer 30 AG 2.0.03 is used in those harrow assemblies where it is necessary to provide fixation or spacing between structural elements such as bearing housings, hubs or discs. Its design provides effective load distribution, reduced wear and long service life even under conditions of increased loads and aggressive external environments.
Attributes
Related listings in your area
How far is it?
Show listings in my area
Show only listings that are
km distanced
Show listings
Contact the seller
User is offline
- 592 active listings
- Company
- Registered for Yesterday
- Біла Церква, Київська область, Україна
Related items
БІЛОЦЕРКІВМАЗ
Yesterday 13:09
Fertilizer spreader RN-1.0 with hydraulics
120,000 ₴
Fertilizer spreader RN-1.0 with hydraulics
Біла Церква, Україна
Fertilizer spreader RN-1.0 – buy a mounted fertilizer spreader from the manufacturer Fertilizer spreader RN-1.0 for accurate and uniform application of mineral fertilizers The RN-1.0 mineral fertilizer spreader from PP "BILOTSERKIVMAZ" is a modern mounted unit for surface application of granular and crystalline mineral fertilizers, feeding of agricultural cr...
Yesterday
Other
бульвар М. Грушевського, 13
120,000 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:09
Boom trailed sprayer for tractor SOKIL – 24
1,515,400 ₴
Boom trailed sprayer for tractor SOKIL – 24
Біла Церква, Україна
The SOKIL – 24 sprayer from Bilotserkivmaz is used for spraying field crops with chemical weed control agents, as well as for applying liquid mineral fertilizers. The sprayer tank, with a volume of 3000 L combined with a boom 24 m wide, allows working for a long time without refilling, which significantly reduces the time spent on field operations and The sp...
Yesterday
Other
бульвар М. Грушевського, 13
1,515,400 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Dismountable ramp
73,500 ₴
Dismountable ramp
Біла Церква, Україна
The frame of the ramp is made from channel bars No.10. The outer surface of the ramp consists of angles that prevent wheel slippage. The ramp coating is made with a two-component paint that reliably protects against precipitation.
Yesterday
Other
бульвар М. Грушевського, 13
73,500 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (angle) for AG-2.1-20 UD49.1.00
14,871 ₴
Roller (angle) for AG-2.1-20 UD49.1.00
Біла Церква, Україна
Purpose: The roller (angle) UD49.1.00 is an important component of the AG-2.1-20 disc harrow. Its primary function is compaction, leveling and partial crushing of the cultivated soil after the discs pass. The roller is installed at the rear of the implement and provides the formation of an optimal soil structure for subsequent field operations — in particula...
Yesterday
Other
бульвар М. Грушевського, 13
14,871 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (tube) for AG-2.1-20 UD39.1.00A
15,000 ₴
Roller (tube) for AG-2.1-20 UD39.1.00A
Біла Церква, Україна
Roller (tube) UD39.1.00A is an important element of the rear working unit of the AG-2.1-20 disc harrow, performing the functions of compaction, leveling and partial soil crushing after the primary tillage by the discs. It is mounted at the rear of the implement and helps form an optimal soil structure for subsequent agronomic operations such as sowing. Desig...
Yesterday
Other
бульвар М. Грушевського, 13
15,000 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (angle) for AG-2,4-20 (AGP-2,4) AG66.1.00
14,364 ₴
Roller (angle) for AG-2,4-20 (AGP-2,4) AG66.1.00
Біла Церква, Україна
Roller (angle) AG66.1.00 is a spare part that is mounted on disc harrows models AG-2,4-20 and AGP-2,4. Its main function is to compact and level the soil after the passage of the working bodies (discs), as well as to break clods and smooth the field surface. It is installed at the rear of the unit and interacts with the soil directly after processing. Design...
Yesterday
Other
бульвар М. Грушевського, 13
14,364 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (strip) for AG-2,4-20 (AGP-2,4) AG76.1.00
20,388 ₴
Roller (strip) for AG-2,4-20 (AGP-2,4) AG76.1.00
Біла Церква, Україна
Roller (strip) AG76.1.00 — is an element of the rear sealing mechanism on AG-2,4-20 and AGP-2,4 disc harrows, which performs the function of final compaction and leveling of the soil surface after the main treatment by disc gangs. Due to its design in the form of a solid metal strip, the roller effectively breaks clods, compacts the soil and levels it, provi...
Yesterday
Other
бульвар М. Грушевського, 13
20,388 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (tube) for AG-2.4-20 (AGP-2.4) AG56.1.00A
20,844 ₴
Roller (tube) for AG-2.4-20 (AGP-2.4) AG56.1.00A
Біла Церква, Україна
The roller (tube) AG56.1.00A is a key structural element of the AG-2.4-20 and AGP-2.4 disc harrows, designed for compaction, leveling and partial crushing of soil after passage of the disc banks. It is located at the rear of the unit and provides soil preparation for sowing by forming a denser seedbed and retaining moisture. Design features: -Shape: A solid ...
Yesterday
Other
бульвар М. Грушевського, 13
20,844 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (strip) for AG-3.0-20 (AG 76.1.00-6)
14,475 ₴
Roller (strip) for AG-3.0-20 (AG 76.1.00-6)
Біла Церква, Україна
Roller (strip) AG76.1.00-6 — is a structural element of the rear sealing mechanism mounted on the disc harrow AG-3.0-20. Its main function is post-pass compaction, leveling and partial crushing of soil after the primary working by the discs. The roller plays an important role in providing a uniform seedbed, conserving moisture and improving the structure of ...
Yesterday
Other
бульвар М. Грушевського, 13
14,475 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (tube) for AG-3.0-20 AG56.1.00-A6
14,826 ₴
Roller (tube) for AG-3.0-20 AG56.1.00-A6
Біла Церква, Україна
The tubular roller AG56.1.00-A6 is an important element of the rear sealing mechanism, installed on the AG-3.0-20 disc harrow. Its main purpose is post-pass sealing, crushing soil clods and leveling the field after disc treatment. The tubular design provides effective operation on various soil types, preventing over-wetting or excessive compaction, which is ...
Yesterday
Other
бульвар М. Грушевського, 13
14,826 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (angle) for AG-2,1-20 AG27.0.00-1 K4
23,634 ₴
Roller assembly (angle) for AG-2,1-20 AG27.0.00-1 K4
Біла Церква, Україна
Roller assembly AG27.0.00-1 K4 (angle) — is the finishing element of the rear working unit, installed on the disc harrow AG-2,1-20. Its main function is compaction, leveling and partial crushing of the soil after primary treatment by the discs. The angled shape of the roller's working surface provides deeper penetration into the soil, which allows more effec...
Yesterday
Other
бульвар М. Грушевського, 13
23,634 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (strip) for AG-2,1-20 AG27.0.00-1 K5
29,568 ₴
Roller assembly (strip) for AG-2,1-20 AG27.0.00-1 K5
Біла Церква, Україна
The roller (strip) AG27.0.00-1 K5 is an important component of the rear part of the AG-2,1-20 series disc harrows. It is designed for final soil processing after the discs pass: compaction, surface leveling and breaking up small clods. Its use ensures the creation of an even seedbed and retention of moisture in the soil. Design features: -Shape: The roller i...
Yesterday
Other
бульвар М. Грушевського, 13
29,568 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (tube) for AG-2,4-20 (AGP-2,4) AG27.0.00 K3
30,876 ₴
Roller assembly (tube) for AG-2,4-20 (AGP-2,4) AG27.0.00 K3
Біла Церква, Україна
The roller assembly (tube) AG27.0.00 K3 is an important element of the disc harrows of the AG-2,4-20 and AGP-2,4 series. Intended to finish soil cultivation after the passage of the discs, the roller performs the function of compaction, leveling and crushing of the topsoil layer. It is located at the rear of the unit and is responsible for preparing the soil...
Yesterday
Other
бульвар М. Грушевського, 13
30,876 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (strip) for AG-2,4-20 (AGP-2,4) AG27.0.00 K5
30,648 ₴
Roller assembly (strip) for AG-2,4-20 (AGP-2,4) AG27.0.00 K5
Біла Церква, Україна
The roller assembly (strip) AG27.0.00 K5 is an important part of the construction of disc harrows of the AG-2,4-20 and AGP-2,4 series. Intended for final soil treatment, this roller performs the functions of compaction, leveling and partial crushing of the topsoil layer after the passage of the disc gangs. It provides soil preparation for sowing by forming a...
Yesterday
Other
бульвар М. Грушевського, 13
30,648 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (angle) for AG-2,7-20 (AGP-2,7) AG27.0.00-81 K4
18,906 ₴
Roller assembly (angle) for AG-2,7-20 (AGP-2,7) AG27.0.00-81 K4
Біла Церква, Україна
Roller assembly (angled) AG27.0.00-81 K4 — a functional element of the rear sealing mechanism, specially designed for the AG-2,7-20 (AGP-2,7) disc harrow. Its purpose is the final soil treatment after discing: compaction, leveling and partial crushing of clods, which contributes to the formation of a quality seedbed. The angled shape of the working surface p...
Yesterday
Other
бульвар М. Грушевського, 13
18,906 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (bar) for AG and AGP-2.7-20 AG27.0.00-8 K5
19,656 ₴
Roller assembly (bar) for AG and AGP-2.7-20 AG27.0.00-8 K5
Біла Церква, Україна
Roller assembly (bar) AG27.0.00-8 K5 — a structural element of the rear compaction mechanism designed for AG-2.7-20 and AGP-2.7-20 disc harrows. Its main function is post-pass compaction, leveling and crushing of the topsoil layer after the discs have worked, providing an even seedbed and improving the water-retention properties of the treated area. Design f...
Yesterday
Other
бульвар М. Грушевського, 13
19,656 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (strip) for AG-3,0-20 (AGP-3,0) AG27.0.00-6 K5
23,916 ₴
Roller assembly (strip) for AG-3,0-20 (AGP-3,0) AG27.0.00-6 K5
Біла Церква, Україна
The roller assembly (strip) AG27.0.00-6 K5 is an important component of the disc harrow construction for the AG-3,0-20 and AGP-3,0 series. It is designed to finish soil cultivation, performing the functions of compaction, leveling, and crushing the top layer of soil after the passage of the disc gangs. Mounted on the rear of the unit, the roller provides ide...
Yesterday
Other
бульвар М. Грушевського, 13
23,916 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Support AG 1.1.00A
576 ₴
Support AG 1.1.00A
Біла Церква, Україна
Support AG 1.1.00A is a reliable spare part that provides fastening of the tine to the frame of agricultural units of the AG and AGP types. Made of high-quality materials, it guarantees stable equipment operation under heavy loads and long-term use. This fastening element is important for ensuring the stability and reliability of the entire unit, allowing ef...
Yesterday
Other
бульвар М. Грушевського, 13
576 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Three-point hitch for AG-2.4-20 AG 0.6.00A
2,530 ₴
Three-point hitch for AG-2.4-20 AG 0.6.00A
Біла Церква, Україна
Three-point hitch for AG-2.4-20 AG 0.6.00A for a disc harrow, cultivator, mulcher to a tractor The three-point hitch for AG-2.4-20 AG 0.6.00A is an important component for connecting a disc harrow, cultivator, or mulcher to a tractor. It provides a reliable connection and efficient power transmission from the tractor to the agricultural implement, allowing s...
Yesterday
Other
бульвар М. Грушевського, 13
2,530 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
AG 0.1.00 Retainer
138 ₴
AG 0.1.00 Retainer
Біла Церква, Україна
AG 0.1.00 Retainer — Retainer for mounting a disc harrow, cultivator, mulcher to a tractor AG 0.1.00 Retainer is a reliable fastening element for mounting a disc harrow, cultivator, or mulcher to a tractor. It provides a stable and secure connection of various agricultural machines to the tractor, ensuring efficient and uninterrupted operation of the equipme...
Yesterday
Other
бульвар М. Грушевського, 13
138 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Nut KO 1.0.05
176 ₴
Nut KO 1.0.05
Біла Церква, Україна
Nut (new bearing assembly) Spare parts for harrows AG, AGP, UDA from 2014 to 2020.
Yesterday
Other
бульвар М. Грушевського, 13
176 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Washer KO 1.0.03
44 ₴
Washer KO 1.0.03
Біла Церква, Україна
Washer (new bearing assembly) Spare parts for harrows AG, AGP, UDA from 2014 to 2020.
Yesterday
Other
бульвар М. Грушевського, 13
44 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Axis KO 1.0.01
1,540 ₴
Axis KO 1.0.01
Біла Церква, Україна
Axis KO 1.0.01 (new bearing assembly) for harrows AG, AGP, UDA manufactured 2014–2020 Axis KO 1.0.01 with a new bearing assembly is a high-quality spare part designed for use in disc harrows AG, AGP and UDA produced from 2014 to 2020. This part provides reliable and uninterrupted operation of your equipment, ensuring high soil cultivation efficiency and long...
Yesterday
Other
бульвар М. Грушевського, 13
1,540 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Axle AG 7.7.02-01
1,540 ₴
Axle AG 7.7.02-01
Біла Церква, Україна
Axle AG 7.7.02-01 is a specialized part designed for AG disc harrows. It has a quick-release design and allows discs to be efficiently secured with 8 bolts, providing reliable fastening and high operational performance when working on agricultural fields. The axle is developed for older-model equipment, including AG and AGP up to 2014. Main characteristics: ...
Yesterday
Other
бульвар М. Грушевського, 13
1,540 ₴
Recently viewed
Kentavr
Yesterday 12:35
Adjustable D370 disc ridger
2,630 ₴
Adjustable D370 disc ridger
Дніпро, Україна
Description of adjustable D370 disc ridger The universal adjustable disc ridger can be attached to walk-behind tractors, power cultivators and mini-tractors. The ridger can be adjusted for working width thanks to movable locking fasteners; working depth and attack angles are additionally adjustable. Durability and reliability are enhanced by 2 bearings insta...
Yesterday
Soil treatment
вул. Надії Алексєєнко, 70
2,630 ₴
AGROZIP
Yesterday 12:30
3-wheel rake-tedder for mini tractor «Sonechko»
11,300 ₴
3-wheel rake-tedder for mini tractor «Sonechko»
Дніпро, Україна
Rake-tedders for the mini tractor «Sonechko» 3-wheel are used for raking mown dried grass into windrows or tedding plant mass that has not yet fully dried. The implement features a simple convenient design that allows haymaking to be carried out with high efficiency on medium and large areas, achieving a maximum productivity of 1.5 ha/h.The 3-wheel rakes att...
Yesterday
Collecting technique for hay, feed
вул. Тітова, 26
11,300 ₴
AGROZIP
Yesterday 12:30
Rake-tedders for minitractor "Sonechko" 4-wheel SHIP
15,200 ₴
Rake-tedders for minitractor "Sonechko" 4-wheel SHIP
Дніпро, Україна
Rake-tedders for minitractor "Sonechko" 4-wheel SHIP - high-quality functional equipment used for raking into windrows of finished dried hay or for fully turning dried plant material. They have a simple, convenient-to-use design, are excellent for collecting and tedding grassy mass on medium and large plots. They have a working width adjustable from 1.8 to 2...
Yesterday
Collecting technique for hay, feed
вул. Тітова, 26
15,200 ₴
AGROZIP
Yesterday 12:27
Two-body plow PL7 for walk-behind tractor
5,630 ₴
Two-body plow PL7 for walk-behind tractor
Дніпро, Україна
Specialized equipment designed for heavy workloads - the two-body plow PL7 for a walk-behind tractor is equipped with all the main functions for performing effective tillage on plots cleared of various mechanical impurities, with light and heavy soils. The adjustable triangular steel frame is equipped with special turnbuckles intended to control transverse a...
Yesterday
Soil treatment
вул. Тітова, 26
5,630 ₴
