Roller (tube) for AG-3.0-20 AG56.1.00-A6
14,826 ₴
Published 13 hours ago by БІЛОЦЕРКІВМАЗ
14,826 ₴
In Other category
бульвар М. Грушевського, 13, Біла Церква, Україна
Get directions →
8 item views
The tubular roller AG56.1.00-A6 is an important element of the rear sealing mechanism, installed on the AG-3.0-20 disc harrow. Its main purpose is post-pass sealing, crushing soil clods and leveling the field after disc treatment. The tubular design provides effective operation on various soil types, preventing over-wetting or excessive compaction, which is especially relevant for preserving soil moisture and structure before sowing.
This type of roller plays a key role in forming a quality seedbed, increases the uniformity of crop emergence and allows reducing the number of mechanical passes over the field. The roller creates optimal conditions for germination, helps level the surface, reduces cloddiness and compacts the topsoil layer to retain moisture.
Design features:
Design type: Tubular roller with a thick wall, providing a balance between strength and moderate weight. The roller surface allows for even work across the entire working width of the harrow.
Designation: Article AG56.1.00-A6 is the factory serial designation of the roller, which is fully compatible with the AG-3.0-20 harrow (working width 3 meters, 20 discs).
Advantages:
Sealing with clod crushing: The tubular design provides not only surface sealing but also performs the function of breaking large soil particles, which contributes to creating an optimal seedbed.
High passability: Thanks to the smooth pipe surface and the design with gaps between segments, the roller does not clog even at increased moisture. This reduces the risk of equipment downtime in difficult field conditions.
Reduced cultivation costs: Combining discing and sealing in one pass reduces the number of operations, cuts fuel costs, wear of implements and labor resources.
Moisture preservation: After the roller pass, the surface layer is compacted, which prevents excessive moisture evaporation. This is especially important in conditions of insufficient moisture or in reduced-tillage systems.
Full compatibility: Specifically designed for installation on the AG-3.0-20 disc harrow, requires no modifications or adapters.
Technical specifications:
Parameter
Value
Type
Sealing roller (tubular)
Article
AG56.1.00-A6
Compatibility
AG-3.0-20 disc harrow
Installation location
Rear sealing mechanism
Purpose
Sealing, crushing, leveling
Material
Anti-corrosion
Pipe diameter
*information provided upon request to the manager
Color
Black
Manufacturer
Bilotserkivmaz
Year of manufacture
2025
Application:
The tubular roller AG56.1.00-A6 is the final element in the technological process of field cultivation with the AG-3.0-20 disc harrow. Its use allows reducing the number of clods, compacting the top layer to retain moisture and leveling the field surface before sowing. Recommended for use on medium loam, heavy and cloddy soils.
Particularly effective in conventional or reduced tillage systems, where it is important to combine soil treatment with leveling and preserving structure for future crops.
Read morePublished on 2026/10/11
Description
The tubular roller AG56.1.00-A6 is an important element of the rear sealing mechanism, installed on the AG-3.0-20 disc harrow. Its main purpose is post-pass sealing, crushing soil clods and leveling the field after disc treatment. The tubular design provides effective operation on various soil types, preventing over-wetting or excessive compaction, which is especially relevant for preserving soil moisture and structure before sowing.
This type of roller plays a key role in forming a quality seedbed, increases the uniformity of crop emergence and allows reducing the number of mechanical passes over the field. The roller creates optimal conditions for germination, helps level the surface, reduces cloddiness and compacts the topsoil layer to retain moisture.
Design features:
Design type: Tubular roller with a thick wall, providing a balance between strength and moderate weight. The roller surface allows for even work across the entire working width of the harrow.
Designation: Article AG56.1.00-A6 is the factory serial designation of the roller, which is fully compatible with the AG-3.0-20 harrow (working width 3 meters, 20 discs).
Advantages:
Sealing with clod crushing: The tubular design provides not only surface sealing but also performs the function of breaking large soil particles, which contributes to creating an optimal seedbed.
High passability: Thanks to the smooth pipe surface and the design with gaps between segments, the roller does not clog even at increased moisture. This reduces the risk of equipment downtime in difficult field conditions.
Reduced cultivation costs: Combining discing and sealing in one pass reduces the number of operations, cuts fuel costs, wear of implements and labor resources.
Moisture preservation: After the roller pass, the surface layer is compacted, which prevents excessive moisture evaporation. This is especially important in conditions of insufficient moisture or in reduced-tillage systems.
Full compatibility: Specifically designed for installation on the AG-3.0-20 disc harrow, requires no modifications or adapters.
Technical specifications:
Parameter
Value
Type
Sealing roller (tubular)
Article
AG56.1.00-A6
Compatibility
AG-3.0-20 disc harrow
Installation location
Rear sealing mechanism
Purpose
Sealing, crushing, leveling
Material
Anti-corrosion
Pipe diameter
*information provided upon request to the manager
Color
Black
Manufacturer
Bilotserkivmaz
Year of manufacture
2025
Application:
The tubular roller AG56.1.00-A6 is the final element in the technological process of field cultivation with the AG-3.0-20 disc harrow. Its use allows reducing the number of clods, compacting the top layer to retain moisture and leveling the field surface before sowing. Recommended for use on medium loam, heavy and cloddy soils.
Particularly effective in conventional or reduced tillage systems, where it is important to combine soil treatment with leveling and preserving structure for future crops.
Attributes
Related listings in your area
How far is it?
Show listings in my area
Show only listings that are
km distanced
Show listings
Contact the seller
User is offline
- 592 active listings
- Company
- Registered for Yesterday
- Біла Церква, Київська область, Україна
Related items
БІЛОЦЕРКІВМАЗ
Yesterday 13:09
Fertilizer spreader RN-1.0 with hydraulics
120,000 ₴
Fertilizer spreader RN-1.0 with hydraulics
Біла Церква, Україна
Fertilizer spreader RN-1.0 – buy a mounted fertilizer spreader from the manufacturer Fertilizer spreader RN-1.0 for accurate and uniform application of mineral fertilizers The RN-1.0 mineral fertilizer spreader from PP "BILOTSERKIVMAZ" is a modern mounted unit for surface application of granular and crystalline mineral fertilizers, feeding of agricultural cr...
Yesterday
Other
бульвар М. Грушевського, 13
120,000 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:09
Boom trailed sprayer for tractor SOKIL – 24
1,515,400 ₴
Boom trailed sprayer for tractor SOKIL – 24
Біла Церква, Україна
The SOKIL – 24 sprayer from Bilotserkivmaz is used for spraying field crops with chemical weed control agents, as well as for applying liquid mineral fertilizers. The sprayer tank, with a volume of 3000 L combined with a boom 24 m wide, allows working for a long time without refilling, which significantly reduces the time spent on field operations and The sp...
Yesterday
Other
бульвар М. Грушевського, 13
1,515,400 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Dismountable ramp
73,500 ₴
Dismountable ramp
Біла Церква, Україна
The frame of the ramp is made from channel bars No.10. The outer surface of the ramp consists of angles that prevent wheel slippage. The ramp coating is made with a two-component paint that reliably protects against precipitation.
Yesterday
Other
бульвар М. Грушевського, 13
73,500 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (angle) for AG-2.1-20 UD49.1.00
14,871 ₴
Roller (angle) for AG-2.1-20 UD49.1.00
Біла Церква, Україна
Purpose: The roller (angle) UD49.1.00 is an important component of the AG-2.1-20 disc harrow. Its primary function is compaction, leveling and partial crushing of the cultivated soil after the discs pass. The roller is installed at the rear of the implement and provides the formation of an optimal soil structure for subsequent field operations — in particula...
Yesterday
Other
бульвар М. Грушевського, 13
14,871 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (tube) for AG-2.1-20 UD39.1.00A
15,000 ₴
Roller (tube) for AG-2.1-20 UD39.1.00A
Біла Церква, Україна
Roller (tube) UD39.1.00A is an important element of the rear working unit of the AG-2.1-20 disc harrow, performing the functions of compaction, leveling and partial soil crushing after the primary tillage by the discs. It is mounted at the rear of the implement and helps form an optimal soil structure for subsequent agronomic operations such as sowing. Desig...
Yesterday
Other
бульвар М. Грушевського, 13
15,000 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (angle) for AG-2,4-20 (AGP-2,4) AG66.1.00
14,364 ₴
Roller (angle) for AG-2,4-20 (AGP-2,4) AG66.1.00
Біла Церква, Україна
Roller (angle) AG66.1.00 is a spare part that is mounted on disc harrows models AG-2,4-20 and AGP-2,4. Its main function is to compact and level the soil after the passage of the working bodies (discs), as well as to break clods and smooth the field surface. It is installed at the rear of the unit and interacts with the soil directly after processing. Design...
Yesterday
Other
бульвар М. Грушевського, 13
14,364 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (strip) for AG-2,4-20 (AGP-2,4) AG76.1.00
20,388 ₴
Roller (strip) for AG-2,4-20 (AGP-2,4) AG76.1.00
Біла Церква, Україна
Roller (strip) AG76.1.00 — is an element of the rear sealing mechanism on AG-2,4-20 and AGP-2,4 disc harrows, which performs the function of final compaction and leveling of the soil surface after the main treatment by disc gangs. Due to its design in the form of a solid metal strip, the roller effectively breaks clods, compacts the soil and levels it, provi...
Yesterday
Other
бульвар М. Грушевського, 13
20,388 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (tube) for AG-2.4-20 (AGP-2.4) AG56.1.00A
20,844 ₴
Roller (tube) for AG-2.4-20 (AGP-2.4) AG56.1.00A
Біла Церква, Україна
The roller (tube) AG56.1.00A is a key structural element of the AG-2.4-20 and AGP-2.4 disc harrows, designed for compaction, leveling and partial crushing of soil after passage of the disc banks. It is located at the rear of the unit and provides soil preparation for sowing by forming a denser seedbed and retaining moisture. Design features: -Shape: A solid ...
Yesterday
Other
бульвар М. Грушевського, 13
20,844 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (strip) for AG-3.0-20 (AG 76.1.00-6)
14,475 ₴
Roller (strip) for AG-3.0-20 (AG 76.1.00-6)
Біла Церква, Україна
Roller (strip) AG76.1.00-6 — is a structural element of the rear sealing mechanism mounted on the disc harrow AG-3.0-20. Its main function is post-pass compaction, leveling and partial crushing of soil after the primary working by the discs. The roller plays an important role in providing a uniform seedbed, conserving moisture and improving the structure of ...
Yesterday
Other
бульвар М. Грушевського, 13
14,475 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (angle) for AG-2,1-20 AG27.0.00-1 K4
23,634 ₴
Roller assembly (angle) for AG-2,1-20 AG27.0.00-1 K4
Біла Церква, Україна
Roller assembly AG27.0.00-1 K4 (angle) — is the finishing element of the rear working unit, installed on the disc harrow AG-2,1-20. Its main function is compaction, leveling and partial crushing of the soil after primary treatment by the discs. The angled shape of the roller's working surface provides deeper penetration into the soil, which allows more effec...
Yesterday
Other
бульвар М. Грушевського, 13
23,634 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (strip) for AG-2,1-20 AG27.0.00-1 K5
29,568 ₴
Roller assembly (strip) for AG-2,1-20 AG27.0.00-1 K5
Біла Церква, Україна
The roller (strip) AG27.0.00-1 K5 is an important component of the rear part of the AG-2,1-20 series disc harrows. It is designed for final soil processing after the discs pass: compaction, surface leveling and breaking up small clods. Its use ensures the creation of an even seedbed and retention of moisture in the soil. Design features: -Shape: The roller i...
Yesterday
Other
бульвар М. Грушевського, 13
29,568 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (tube) for AG-2,4-20 (AGP-2,4) AG27.0.00 K3
30,876 ₴
Roller assembly (tube) for AG-2,4-20 (AGP-2,4) AG27.0.00 K3
Біла Церква, Україна
The roller assembly (tube) AG27.0.00 K3 is an important element of the disc harrows of the AG-2,4-20 and AGP-2,4 series. Intended to finish soil cultivation after the passage of the discs, the roller performs the function of compaction, leveling and crushing of the topsoil layer. It is located at the rear of the unit and is responsible for preparing the soil...
Yesterday
Other
бульвар М. Грушевського, 13
30,876 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (strip) for AG-2,4-20 (AGP-2,4) AG27.0.00 K5
30,648 ₴
Roller assembly (strip) for AG-2,4-20 (AGP-2,4) AG27.0.00 K5
Біла Церква, Україна
The roller assembly (strip) AG27.0.00 K5 is an important part of the construction of disc harrows of the AG-2,4-20 and AGP-2,4 series. Intended for final soil treatment, this roller performs the functions of compaction, leveling and partial crushing of the topsoil layer after the passage of the disc gangs. It provides soil preparation for sowing by forming a...
Yesterday
Other
бульвар М. Грушевського, 13
30,648 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (angle) for AG-2,7-20 (AGP-2,7) AG27.0.00-81 K4
18,906 ₴
Roller assembly (angle) for AG-2,7-20 (AGP-2,7) AG27.0.00-81 K4
Біла Церква, Україна
Roller assembly (angled) AG27.0.00-81 K4 — a functional element of the rear sealing mechanism, specially designed for the AG-2,7-20 (AGP-2,7) disc harrow. Its purpose is the final soil treatment after discing: compaction, leveling and partial crushing of clods, which contributes to the formation of a quality seedbed. The angled shape of the working surface p...
Yesterday
Other
бульвар М. Грушевського, 13
18,906 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (bar) for AG and AGP-2.7-20 AG27.0.00-8 K5
19,656 ₴
Roller assembly (bar) for AG and AGP-2.7-20 AG27.0.00-8 K5
Біла Церква, Україна
Roller assembly (bar) AG27.0.00-8 K5 — a structural element of the rear compaction mechanism designed for AG-2.7-20 and AGP-2.7-20 disc harrows. Its main function is post-pass compaction, leveling and crushing of the topsoil layer after the discs have worked, providing an even seedbed and improving the water-retention properties of the treated area. Design f...
Yesterday
Other
бульвар М. Грушевського, 13
19,656 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (strip) for AG-3,0-20 (AGP-3,0) AG27.0.00-6 K5
23,916 ₴
Roller assembly (strip) for AG-3,0-20 (AGP-3,0) AG27.0.00-6 K5
Біла Церква, Україна
The roller assembly (strip) AG27.0.00-6 K5 is an important component of the disc harrow construction for the AG-3,0-20 and AGP-3,0 series. It is designed to finish soil cultivation, performing the functions of compaction, leveling, and crushing the top layer of soil after the passage of the disc gangs. Mounted on the rear of the unit, the roller provides ide...
Yesterday
Other
бульвар М. Грушевського, 13
23,916 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Support AG 1.1.00A
576 ₴
Support AG 1.1.00A
Біла Церква, Україна
Support AG 1.1.00A is a reliable spare part that provides fastening of the tine to the frame of agricultural units of the AG and AGP types. Made of high-quality materials, it guarantees stable equipment operation under heavy loads and long-term use. This fastening element is important for ensuring the stability and reliability of the entire unit, allowing ef...
Yesterday
Other
бульвар М. Грушевського, 13
576 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Three-point hitch for AG-2.4-20 AG 0.6.00A
2,530 ₴
Three-point hitch for AG-2.4-20 AG 0.6.00A
Біла Церква, Україна
Three-point hitch for AG-2.4-20 AG 0.6.00A for a disc harrow, cultivator, mulcher to a tractor The three-point hitch for AG-2.4-20 AG 0.6.00A is an important component for connecting a disc harrow, cultivator, or mulcher to a tractor. It provides a reliable connection and efficient power transmission from the tractor to the agricultural implement, allowing s...
Yesterday
Other
бульвар М. Грушевського, 13
2,530 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
AG 0.1.00 Retainer
138 ₴
AG 0.1.00 Retainer
Біла Церква, Україна
AG 0.1.00 Retainer — Retainer for mounting a disc harrow, cultivator, mulcher to a tractor AG 0.1.00 Retainer is a reliable fastening element for mounting a disc harrow, cultivator, or mulcher to a tractor. It provides a stable and secure connection of various agricultural machines to the tractor, ensuring efficient and uninterrupted operation of the equipme...
Yesterday
Other
бульвар М. Грушевського, 13
138 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Nut KO 1.0.05
176 ₴
Nut KO 1.0.05
Біла Церква, Україна
Nut (new bearing assembly) Spare parts for harrows AG, AGP, UDA from 2014 to 2020.
Yesterday
Other
бульвар М. Грушевського, 13
176 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Washer KO 1.0.03
44 ₴
Washer KO 1.0.03
Біла Церква, Україна
Washer (new bearing assembly) Spare parts for harrows AG, AGP, UDA from 2014 to 2020.
Yesterday
Other
бульвар М. Грушевського, 13
44 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Axis KO 1.0.01
1,540 ₴
Axis KO 1.0.01
Біла Церква, Україна
Axis KO 1.0.01 (new bearing assembly) for harrows AG, AGP, UDA manufactured 2014–2020 Axis KO 1.0.01 with a new bearing assembly is a high-quality spare part designed for use in disc harrows AG, AGP and UDA produced from 2014 to 2020. This part provides reliable and uninterrupted operation of your equipment, ensuring high soil cultivation efficiency and long...
Yesterday
Other
бульвар М. Грушевського, 13
1,540 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Axle AG 7.7.02-01
1,540 ₴
Axle AG 7.7.02-01
Біла Церква, Україна
Axle AG 7.7.02-01 is a specialized part designed for AG disc harrows. It has a quick-release design and allows discs to be efficiently secured with 8 bolts, providing reliable fastening and high operational performance when working on agricultural fields. The axle is developed for older-model equipment, including AG and AGP up to 2014. Main characteristics: ...
Yesterday
Other
бульвар М. Грушевського, 13
1,540 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Holder AG7.3.00A-1
2,420 ₴
Holder AG7.3.00A-1
Біла Церква, Україна
Holder AG 7.3.00A-1 — Holder (new bearing assembly) of the new design after 2014 Holder AG 7.3.00A-1 — this is a modern spare part for disc harrows of the new design that were produced after 2014. This holder (new bearing assembly) provides high reliability, wear resistance and stable operation of the equipment under heavy loads. It is ideal for those who wa...
Yesterday
Other
бульвар М. Грушевського, 13
2,420 ₴
Recently viewed
БІЛОЦЕРКІВМАЗ
Yesterday 13:05
Bearing 180212 GOST 8882-2021 (6212-2RS)
267 ₴
Bearing 180212 GOST 8882-2021 (6212-2RS)
Біла Церква, Україна
GOST 33261-2015 was introduced to replace GOST 8882-75; it fully corresponds to the international standard ISO 15:2011.
Yesterday
Spare parts
бульвар М. Грушевського, 13
267 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:06
Roller (corner) for UDA-3.1-20/UDA-5.2-20 AG 66.1.00-6
10,164 ₴
Roller (corner) for UDA-3.1-20/UDA-5.2-20 AG 66.1.00-6
Біла Церква, Україна
Roller (corner) for UDA-3.1-20/UDA-5.2-20 AG 66.1.00-6
Yesterday
Spare parts
бульвар М. Грушевського, 13
10,164 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Bushing for mounting the spring assembly of cultivator KN 2,8.02.62
219 ₴
Bushing for mounting the spring assembly of cultivator KN 2,8.02.62
Біла Церква, Україна
Bushing for mounting the spring assembly of cultivator KN 2,8.02.62 Part of the mounting of the "Spring block of the cultivator shank assembly KN in complete assembly KN2,8.02.60.27", installed on the pivot axis of the spring block at the upper part of the shank of the KN tine, serves to ensure backlash-free oscillating and reciprocating movements of the tin...
Yesterday
Spare parts
бульвар М. Грушевського, 13
219 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Spring KN 2,8.00.28 of cultivator shank
387 ₴
Spring KN 2,8.00.28 of cultivator shank
Біла Церква, Україна
Spring of cultivator shank KN 2, 8.00.28 the main part of the assembly "Spring block of the cultivator shank KN assembled", installed in the upper part of the cultivator shank KN, attached to the cultivator frame, serves to protect the working tool (the cultivator KN sweep point) from damage when driving over an obstacle in the soil (stones, metal, fragments...
Yesterday
Spare parts
бульвар М. Грушевського, 13
387 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Rotor knife (curved) PN 2,0.00.02-03 (8 mm)
270 ₴
Rotor knife (curved) PN 2,0.00.02-03 (8 mm)
Біла Церква, Україна
Rotor knife (curved) PN 2,0.00.02-03 (8 mm)
Yesterday
Spare parts
бульвар М. Грушевського, 13
270 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (angle) for AG-2,4-20 (AGP-2,4) AG66.1.00
14,364 ₴
Roller (angle) for AG-2,4-20 (AGP-2,4) AG66.1.00
Біла Церква, Україна
Roller (angle) AG66.1.00 is a spare part that is mounted on disc harrows models AG-2,4-20 and AGP-2,4. Its main function is to compact and level the soil after the passage of the working bodies (discs), as well as to break clods and smooth the field surface. It is installed at the rear of the unit and interacts with the soil directly after processing. Design...
Yesterday
Other
бульвар М. Грушевського, 13
14,364 ₴
