Roller assembly (angle) for AG-2,1-20 AG27.0.00-1 K4
23,634 ₴
Published 13 hours ago by БІЛОЦЕРКІВМАЗ
23,634 ₴
In Other category
бульвар М. Грушевського, 13, Біла Церква, Україна
Get directions →
10 item views
Roller assembly AG27.0.00-1 K4 (angle) — is the finishing element of the rear working unit, installed on the disc harrow AG-2,1-20. Its main function is compaction, leveling and partial crushing of the soil after primary treatment by the discs. The angled shape of the roller's working surface provides deeper penetration into the soil, which allows more effective breaking of clods and forming a uniform seedbed.
This roller is used to stabilize the topsoil layer, improve seed-to-soil contact, preserve moisture and reduce the number of passes of implements across the field. Thanks to the design based on angled segments, it provides not only compaction but also some loosening of the surface microstructure, which helps create optimal conditions for sowing.
Design features:
Construction type:Angled segment-type roller, assembled with bearing units, axles and fastenings. The working part is made of metal angles positioned at a certain angle to the axis of rotation. This allows combining the functions of compaction and crushing.
Location:Mounted on the rear part of the disc harrow AG-2,1-20, attached directly to the main frame via brackets or hangers. Provides stable and even operation across the full working width of the implement.
Designation:Article AG27.0.00-1 K4 belongs to roller assemblies compatible specifically with the harrow model AG-2,1-20 (working width 2.1 m, 20 discs).
Advantages:
Enhanced compaction with partial loosening:The angled shape not only compacts but also helps crush hard soil fractions, breaking clods after disc treatment.
Reduced energy costs:Combining several operations in one pass reduces fuel and equipment operating costs.
Improved sowing quality:Forming an even seedbed promotes better seed contact with the soil, which positively affects emergence uniformity.
Moisture protection:Compaction prevents excessive evaporation, which is especially important in arid regions or when natural moisture is insufficient.
Compatibility without modifications:The roller assembly AG27.0.00-1 K4 is fully ready for installation on the AG-2,1-20 — does not require modifications, adapters or changes to the harrow structure.
Technical specifications:
Parameter
Value
Type
Compaction roller (angled, assembly)
Article
AG27.0.00-1 K4
Compatibility
Disc harrow AG-2,1-20
Installation position
Rear harrow mechanism
Construction
Angled segments + axle + bearings
Material
Wear-resistant steel
Purpose
Compaction, leveling, soil crushing
Color
Black / graphite
Coating
Anti-corrosion
Manufacturer
Bilotserkivmaz
Year of manufacture
2025
Application:
The roller assembly AG27.0.00-1 K4 (angle) is designed for installation on the disc harrow AG-2,1-20 as a final working element. Its use provides compaction and crushing of the soil after the discs pass, which significantly improves seedbed preparation. Recommended for light, medium-loam and heavy soil types.
Particularly effective in fields cultivated by traditional technology, as well as in arid regions where it is important to minimize moisture loss after discing. Can be used both in individual farms and in industrial agricultural enterprises.
Read morePublished on 2026/10/11
Description
Roller assembly AG27.0.00-1 K4 (angle) — is the finishing element of the rear working unit, installed on the disc harrow AG-2,1-20. Its main function is compaction, leveling and partial crushing of the soil after primary treatment by the discs. The angled shape of the roller's working surface provides deeper penetration into the soil, which allows more effective breaking of clods and forming a uniform seedbed.
This roller is used to stabilize the topsoil layer, improve seed-to-soil contact, preserve moisture and reduce the number of passes of implements across the field. Thanks to the design based on angled segments, it provides not only compaction but also some loosening of the surface microstructure, which helps create optimal conditions for sowing.
Design features:
Construction type:Angled segment-type roller, assembled with bearing units, axles and fastenings. The working part is made of metal angles positioned at a certain angle to the axis of rotation. This allows combining the functions of compaction and crushing.
Location:Mounted on the rear part of the disc harrow AG-2,1-20, attached directly to the main frame via brackets or hangers. Provides stable and even operation across the full working width of the implement.
Designation:Article AG27.0.00-1 K4 belongs to roller assemblies compatible specifically with the harrow model AG-2,1-20 (working width 2.1 m, 20 discs).
Advantages:
Enhanced compaction with partial loosening:The angled shape not only compacts but also helps crush hard soil fractions, breaking clods after disc treatment.
Reduced energy costs:Combining several operations in one pass reduces fuel and equipment operating costs.
Improved sowing quality:Forming an even seedbed promotes better seed contact with the soil, which positively affects emergence uniformity.
Moisture protection:Compaction prevents excessive evaporation, which is especially important in arid regions or when natural moisture is insufficient.
Compatibility without modifications:The roller assembly AG27.0.00-1 K4 is fully ready for installation on the AG-2,1-20 — does not require modifications, adapters or changes to the harrow structure.
Technical specifications:
Parameter
Value
Type
Compaction roller (angled, assembly)
Article
AG27.0.00-1 K4
Compatibility
Disc harrow AG-2,1-20
Installation position
Rear harrow mechanism
Construction
Angled segments + axle + bearings
Material
Wear-resistant steel
Purpose
Compaction, leveling, soil crushing
Color
Black / graphite
Coating
Anti-corrosion
Manufacturer
Bilotserkivmaz
Year of manufacture
2025
Application:
The roller assembly AG27.0.00-1 K4 (angle) is designed for installation on the disc harrow AG-2,1-20 as a final working element. Its use provides compaction and crushing of the soil after the discs pass, which significantly improves seedbed preparation. Recommended for light, medium-loam and heavy soil types.
Particularly effective in fields cultivated by traditional technology, as well as in arid regions where it is important to minimize moisture loss after discing. Can be used both in individual farms and in industrial agricultural enterprises.
Attributes
Related listings in your area
How far is it?
Show listings in my area
Show only listings that are
km distanced
Show listings
Contact the seller
User is offline
- 592 active listings
- Company
- Registered for Yesterday
- Біла Церква, Київська область, Україна
Related items
БІЛОЦЕРКІВМАЗ
Yesterday 13:09
Fertilizer spreader RN-1.0 with hydraulics
120,000 ₴
Fertilizer spreader RN-1.0 with hydraulics
Біла Церква, Україна
Fertilizer spreader RN-1.0 – buy a mounted fertilizer spreader from the manufacturer Fertilizer spreader RN-1.0 for accurate and uniform application of mineral fertilizers The RN-1.0 mineral fertilizer spreader from PP "BILOTSERKIVMAZ" is a modern mounted unit for surface application of granular and crystalline mineral fertilizers, feeding of agricultural cr...
Yesterday
Other
бульвар М. Грушевського, 13
120,000 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:09
Boom trailed sprayer for tractor SOKIL – 24
1,515,400 ₴
Boom trailed sprayer for tractor SOKIL – 24
Біла Церква, Україна
The SOKIL – 24 sprayer from Bilotserkivmaz is used for spraying field crops with chemical weed control agents, as well as for applying liquid mineral fertilizers. The sprayer tank, with a volume of 3000 L combined with a boom 24 m wide, allows working for a long time without refilling, which significantly reduces the time spent on field operations and The sp...
Yesterday
Other
бульвар М. Грушевського, 13
1,515,400 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Dismountable ramp
73,500 ₴
Dismountable ramp
Біла Церква, Україна
The frame of the ramp is made from channel bars No.10. The outer surface of the ramp consists of angles that prevent wheel slippage. The ramp coating is made with a two-component paint that reliably protects against precipitation.
Yesterday
Other
бульвар М. Грушевського, 13
73,500 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (angle) for AG-2.1-20 UD49.1.00
14,871 ₴
Roller (angle) for AG-2.1-20 UD49.1.00
Біла Церква, Україна
Purpose: The roller (angle) UD49.1.00 is an important component of the AG-2.1-20 disc harrow. Its primary function is compaction, leveling and partial crushing of the cultivated soil after the discs pass. The roller is installed at the rear of the implement and provides the formation of an optimal soil structure for subsequent field operations — in particula...
Yesterday
Other
бульвар М. Грушевського, 13
14,871 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (tube) for AG-2.1-20 UD39.1.00A
15,000 ₴
Roller (tube) for AG-2.1-20 UD39.1.00A
Біла Церква, Україна
Roller (tube) UD39.1.00A is an important element of the rear working unit of the AG-2.1-20 disc harrow, performing the functions of compaction, leveling and partial soil crushing after the primary tillage by the discs. It is mounted at the rear of the implement and helps form an optimal soil structure for subsequent agronomic operations such as sowing. Desig...
Yesterday
Other
бульвар М. Грушевського, 13
15,000 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (angle) for AG-2,4-20 (AGP-2,4) AG66.1.00
14,364 ₴
Roller (angle) for AG-2,4-20 (AGP-2,4) AG66.1.00
Біла Церква, Україна
Roller (angle) AG66.1.00 is a spare part that is mounted on disc harrows models AG-2,4-20 and AGP-2,4. Its main function is to compact and level the soil after the passage of the working bodies (discs), as well as to break clods and smooth the field surface. It is installed at the rear of the unit and interacts with the soil directly after processing. Design...
Yesterday
Other
бульвар М. Грушевського, 13
14,364 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (strip) for AG-2,4-20 (AGP-2,4) AG76.1.00
20,388 ₴
Roller (strip) for AG-2,4-20 (AGP-2,4) AG76.1.00
Біла Церква, Україна
Roller (strip) AG76.1.00 — is an element of the rear sealing mechanism on AG-2,4-20 and AGP-2,4 disc harrows, which performs the function of final compaction and leveling of the soil surface after the main treatment by disc gangs. Due to its design in the form of a solid metal strip, the roller effectively breaks clods, compacts the soil and levels it, provi...
Yesterday
Other
бульвар М. Грушевського, 13
20,388 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (tube) for AG-2.4-20 (AGP-2.4) AG56.1.00A
20,844 ₴
Roller (tube) for AG-2.4-20 (AGP-2.4) AG56.1.00A
Біла Церква, Україна
The roller (tube) AG56.1.00A is a key structural element of the AG-2.4-20 and AGP-2.4 disc harrows, designed for compaction, leveling and partial crushing of soil after passage of the disc banks. It is located at the rear of the unit and provides soil preparation for sowing by forming a denser seedbed and retaining moisture. Design features: -Shape: A solid ...
Yesterday
Other
бульвар М. Грушевського, 13
20,844 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (strip) for AG-3.0-20 (AG 76.1.00-6)
14,475 ₴
Roller (strip) for AG-3.0-20 (AG 76.1.00-6)
Біла Церква, Україна
Roller (strip) AG76.1.00-6 — is a structural element of the rear sealing mechanism mounted on the disc harrow AG-3.0-20. Its main function is post-pass compaction, leveling and partial crushing of soil after the primary working by the discs. The roller plays an important role in providing a uniform seedbed, conserving moisture and improving the structure of ...
Yesterday
Other
бульвар М. Грушевського, 13
14,475 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller (tube) for AG-3.0-20 AG56.1.00-A6
14,826 ₴
Roller (tube) for AG-3.0-20 AG56.1.00-A6
Біла Церква, Україна
The tubular roller AG56.1.00-A6 is an important element of the rear sealing mechanism, installed on the AG-3.0-20 disc harrow. Its main purpose is post-pass sealing, crushing soil clods and leveling the field after disc treatment. The tubular design provides effective operation on various soil types, preventing over-wetting or excessive compaction, which is ...
Yesterday
Other
бульвар М. Грушевського, 13
14,826 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (strip) for AG-2,1-20 AG27.0.00-1 K5
29,568 ₴
Roller assembly (strip) for AG-2,1-20 AG27.0.00-1 K5
Біла Церква, Україна
The roller (strip) AG27.0.00-1 K5 is an important component of the rear part of the AG-2,1-20 series disc harrows. It is designed for final soil processing after the discs pass: compaction, surface leveling and breaking up small clods. Its use ensures the creation of an even seedbed and retention of moisture in the soil. Design features: -Shape: The roller i...
Yesterday
Other
бульвар М. Грушевського, 13
29,568 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (tube) for AG-2,4-20 (AGP-2,4) AG27.0.00 K3
30,876 ₴
Roller assembly (tube) for AG-2,4-20 (AGP-2,4) AG27.0.00 K3
Біла Церква, Україна
The roller assembly (tube) AG27.0.00 K3 is an important element of the disc harrows of the AG-2,4-20 and AGP-2,4 series. Intended to finish soil cultivation after the passage of the discs, the roller performs the function of compaction, leveling and crushing of the topsoil layer. It is located at the rear of the unit and is responsible for preparing the soil...
Yesterday
Other
бульвар М. Грушевського, 13
30,876 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (strip) for AG-2,4-20 (AGP-2,4) AG27.0.00 K5
30,648 ₴
Roller assembly (strip) for AG-2,4-20 (AGP-2,4) AG27.0.00 K5
Біла Церква, Україна
The roller assembly (strip) AG27.0.00 K5 is an important part of the construction of disc harrows of the AG-2,4-20 and AGP-2,4 series. Intended for final soil treatment, this roller performs the functions of compaction, leveling and partial crushing of the topsoil layer after the passage of the disc gangs. It provides soil preparation for sowing by forming a...
Yesterday
Other
бульвар М. Грушевського, 13
30,648 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (angle) for AG-2,7-20 (AGP-2,7) AG27.0.00-81 K4
18,906 ₴
Roller assembly (angle) for AG-2,7-20 (AGP-2,7) AG27.0.00-81 K4
Біла Церква, Україна
Roller assembly (angled) AG27.0.00-81 K4 — a functional element of the rear sealing mechanism, specially designed for the AG-2,7-20 (AGP-2,7) disc harrow. Its purpose is the final soil treatment after discing: compaction, leveling and partial crushing of clods, which contributes to the formation of a quality seedbed. The angled shape of the working surface p...
Yesterday
Other
бульвар М. Грушевського, 13
18,906 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (bar) for AG and AGP-2.7-20 AG27.0.00-8 K5
19,656 ₴
Roller assembly (bar) for AG and AGP-2.7-20 AG27.0.00-8 K5
Біла Церква, Україна
Roller assembly (bar) AG27.0.00-8 K5 — a structural element of the rear compaction mechanism designed for AG-2.7-20 and AGP-2.7-20 disc harrows. Its main function is post-pass compaction, leveling and crushing of the topsoil layer after the discs have worked, providing an even seedbed and improving the water-retention properties of the treated area. Design f...
Yesterday
Other
бульвар М. Грушевського, 13
19,656 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Roller assembly (strip) for AG-3,0-20 (AGP-3,0) AG27.0.00-6 K5
23,916 ₴
Roller assembly (strip) for AG-3,0-20 (AGP-3,0) AG27.0.00-6 K5
Біла Церква, Україна
The roller assembly (strip) AG27.0.00-6 K5 is an important component of the disc harrow construction for the AG-3,0-20 and AGP-3,0 series. It is designed to finish soil cultivation, performing the functions of compaction, leveling, and crushing the top layer of soil after the passage of the disc gangs. Mounted on the rear of the unit, the roller provides ide...
Yesterday
Other
бульвар М. Грушевського, 13
23,916 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Support AG 1.1.00A
576 ₴
Support AG 1.1.00A
Біла Церква, Україна
Support AG 1.1.00A is a reliable spare part that provides fastening of the tine to the frame of agricultural units of the AG and AGP types. Made of high-quality materials, it guarantees stable equipment operation under heavy loads and long-term use. This fastening element is important for ensuring the stability and reliability of the entire unit, allowing ef...
Yesterday
Other
бульвар М. Грушевського, 13
576 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Three-point hitch for AG-2.4-20 AG 0.6.00A
2,530 ₴
Three-point hitch for AG-2.4-20 AG 0.6.00A
Біла Церква, Україна
Three-point hitch for AG-2.4-20 AG 0.6.00A for a disc harrow, cultivator, mulcher to a tractor The three-point hitch for AG-2.4-20 AG 0.6.00A is an important component for connecting a disc harrow, cultivator, or mulcher to a tractor. It provides a reliable connection and efficient power transmission from the tractor to the agricultural implement, allowing s...
Yesterday
Other
бульвар М. Грушевського, 13
2,530 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
AG 0.1.00 Retainer
138 ₴
AG 0.1.00 Retainer
Біла Церква, Україна
AG 0.1.00 Retainer — Retainer for mounting a disc harrow, cultivator, mulcher to a tractor AG 0.1.00 Retainer is a reliable fastening element for mounting a disc harrow, cultivator, or mulcher to a tractor. It provides a stable and secure connection of various agricultural machines to the tractor, ensuring efficient and uninterrupted operation of the equipme...
Yesterday
Other
бульвар М. Грушевського, 13
138 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Nut KO 1.0.05
176 ₴
Nut KO 1.0.05
Біла Церква, Україна
Nut (new bearing assembly) Spare parts for harrows AG, AGP, UDA from 2014 to 2020.
Yesterday
Other
бульвар М. Грушевського, 13
176 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Washer KO 1.0.03
44 ₴
Washer KO 1.0.03
Біла Церква, Україна
Washer (new bearing assembly) Spare parts for harrows AG, AGP, UDA from 2014 to 2020.
Yesterday
Other
бульвар М. Грушевського, 13
44 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Axis KO 1.0.01
1,540 ₴
Axis KO 1.0.01
Біла Церква, Україна
Axis KO 1.0.01 (new bearing assembly) for harrows AG, AGP, UDA manufactured 2014–2020 Axis KO 1.0.01 with a new bearing assembly is a high-quality spare part designed for use in disc harrows AG, AGP and UDA produced from 2014 to 2020. This part provides reliable and uninterrupted operation of your equipment, ensuring high soil cultivation efficiency and long...
Yesterday
Other
бульвар М. Грушевського, 13
1,540 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Axle AG 7.7.02-01
1,540 ₴
Axle AG 7.7.02-01
Біла Церква, Україна
Axle AG 7.7.02-01 is a specialized part designed for AG disc harrows. It has a quick-release design and allows discs to be efficiently secured with 8 bolts, providing reliable fastening and high operational performance when working on agricultural fields. The axle is developed for older-model equipment, including AG and AGP up to 2014. Main characteristics: ...
Yesterday
Other
бульвар М. Грушевського, 13
1,540 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Holder AG7.3.00A-1
2,420 ₴
Holder AG7.3.00A-1
Біла Церква, Україна
Holder AG 7.3.00A-1 — Holder (new bearing assembly) of the new design after 2014 Holder AG 7.3.00A-1 — this is a modern spare part for disc harrows of the new design that were produced after 2014. This holder (new bearing assembly) provides high reliability, wear resistance and stable operation of the equipment under heavy loads. It is ideal for those who wa...
Yesterday
Other
бульвар М. Грушевського, 13
2,420 ₴
Recently viewed
БІЛОЦЕРКІВМАЗ
Yesterday 13:06
Bearing LSQFR 308 TDT
1,500 ₴
Bearing LSQFR 308 TDT
Біла Церква, Україна
The LSQFR 308 TDT housing bearing is a ready-to-install unit that combines a support housing (Flansch type — flange) with a built-in self-aligning ball bearing. This design provides easy installation, shaft misalignment compensation, and high operational reliability. Main characteristics: -Housing type: Flanged, square (QFR series) -Bearing type: Ball, self-...
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,500 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Frame of section UD 18.1.00-01
7,176 ₴
Frame of section UD 18.1.00-01
Біла Церква, Україна
Frame of section UD 18.1.00-01
Yesterday
Spare parts
бульвар М. Грушевського, 13
7,176 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:05
Bearing 180206
98 ₴
Bearing 180206
Біла Церква, Україна
GOST 33261-2015 was introduced to replace GOST 8882-75, which fully corresponds to the international standard ISO 15:2011.
Yesterday
Spare parts
бульвар М. Грушевського, 13
98 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Paw Stand KN 2,8.00.09
726 ₴
Paw Stand KN 2,8.00.09
Біла Церква, Україна
The paw stand is made from a strip 16 mm thick and 45 mm wide from steel 45; arrow-shaped paws are made from sheet 6 mm thick from steel 65G; paw width 270 mm.
Yesterday
Spare parts
бульвар М. Грушевського, 13
726 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Dismountable ramp
73,500 ₴
Dismountable ramp
Біла Церква, Україна
The frame of the ramp is made from channel bars No.10. The outer surface of the ramp consists of angles that prevent wheel slippage. The ramp coating is made with a two-component paint that reliably protects against precipitation.
Yesterday
Other
бульвар М. Грушевського, 13
73,500 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:07
Nut M42×3 for UD 0.0.19-01 mounting
258 ₴
Nut M42×3 for UD 0.0.19-01 mounting
Біла Церква, Україна
Nut M42×3 UD 0.0.19-01 for mounting on disc harrows AG, AGP, UDA, DICH Intended: for fastening working elements (stands of AG, AGP, UDA, DICH). Characteristics of the nut for fastening stands on plows UD 0.0.19-01 hexagonal nut with thread M42×3, wrench size 60 mm. one of the faces has the shape of a washer with an outer diameter of 70 mm. Made of steel 35.
Yesterday
Spare parts
бульвар М. Грушевського, 13
258 ₴
БІЛОЦЕРКІВМАЗ
Yesterday 13:08
Disk AG2.1.01-01 D 510mm 8 holes
1,500 ₴
Disk AG2.1.01-01 D 510mm 8 holes
Біла Церква, Україна
Disk AG2.1.01-01 D 510mm 8 holes
Yesterday
Spare parts
бульвар М. Грушевського, 13
1,500 ₴
