Two-body plough Bomet 2-30 (deep ploughing to 30 cm) for tractor power from 35 hp

21,500 ₴
Soil treatment
Yesterday 12:27
Україна
Дніпро Get directions →
вул. Тітова, 26
0 views
Published 15 hours ago by AGROZIP
21,500 ₴
In Soil treatment category
вул. Тітова, 26, Дніпро, Україна
Get directions →
0 item views

An effective implement for deep cultivation of agricultural land - the two-body plough Bomet (Bomet) 2-30 for a mini tractor, which is successfully used on fields without stones and flagstones, on soils of any complexity, medium and large areas. It is mounted using a rear three-point hitch on mini tractors with engine power from 20 horsepower.
Equipped with two working bodies (mouldboards), this new tractor plough is distinguished by high productivity - up to 0.5 ha/h, at an operating speed of agricultural transport - 12 km/h. On the upper part of the mouldboards there are coulter-extensions - additional elements that perform the same function as skimmers. Neatly removing the top layer of soil, where weed rhizomes and crop residues are located, they throw the soil into the furrow, and the layer of soil cut by the share and turned over by the mouldboard covers the top layer together with the plants. Thus, deep burial of plant residues occurs, the soil is actively loosened, becoming saturated with moisture and oxygen, which leads to increased yields and limits weed growth.
The maximum working depth that the two-body plough Bomet (Bomet) 2-30 for a mini tractor has is 30 cm. The ploughing depth can be adjusted by a special screw lever that is installed on the support wheel bracket. The total working width of the working bodies is 60 cm, on the hitch system there is a handle that allows you to set the frame closer to the agricultural transport and plough the track starting right from the tractor wheels.
Both bodies are mounted on 70 cm high stands, the mouldboards installed on the 2-30 trailer plough for a mini tractor consist of two parts - the breast and the wing of the mouldboard. During intensive work the front part (breast) wears out much faster, therefore the design provides special joints that allow you to quickly replace this element with a new one.
Main advantages of the two-body plough Bomet (Bomet) 2-30:

Efficient work with high productivity.
Great working depth.
Two sturdy bodies equipped with coulter-extensions.
Availability of easy adjustment of all important functions.

Tractor type: mini tractor
Power of the towing vehicle, hp: from 20
Manufacturer: Bomet
Working width, m: 0.6
Type of body: right
Number of bodies, pcs: 2-body
Distance between bodies, mm: 520
Soil working depth, mm: 300
Weight, kg: 200

Read more

Published on 2026/10/11

Description

An effective implement for deep cultivation of agricultural land - the two-body plough Bomet (Bomet) 2-30 for a mini tractor, which is successfully used on fields without stones and flagstones, on soils of any complexity, medium and large areas. It is mounted using a rear three-point hitch on mini tractors with engine power from 20 horsepower.
Equipped with two working bodies (mouldboards), this new tractor plough is distinguished by high productivity - up to 0.5 ha/h, at an operating speed of agricultural transport - 12 km/h. On the upper part of the mouldboards there are coulter-extensions - additional elements that perform the same function as skimmers. Neatly removing the top layer of soil, where weed rhizomes and crop residues are located, they throw the soil into the furrow, and the layer of soil cut by the share and turned over by the mouldboard covers the top layer together with the plants. Thus, deep burial of plant residues occurs, the soil is actively loosened, becoming saturated with moisture and oxygen, which leads to increased yields and limits weed growth.
The maximum working depth that the two-body plough Bomet (Bomet) 2-30 for a mini tractor has is 30 cm. The ploughing depth can be adjusted by a special screw lever that is installed on the support wheel bracket. The total working width of the working bodies is 60 cm, on the hitch system there is a handle that allows you to set the frame closer to the agricultural transport and plough the track starting right from the tractor wheels.
Both bodies are mounted on 70 cm high stands, the mouldboards installed on the 2-30 trailer plough for a mini tractor consist of two parts - the breast and the wing of the mouldboard. During intensive work the front part (breast) wears out much faster, therefore the design provides special joints that allow you to quickly replace this element with a new one.
Main advantages of the two-body plough Bomet (Bomet) 2-30:

Efficient work with high productivity.
Great working depth.
Two sturdy bodies equipped with coulter-extensions.
Availability of easy adjustment of all important functions.

Tractor type: mini tractor
Power of the towing vehicle, hp: from 20
Manufacturer: Bomet
Working width, m: 0.6
Type of body: right
Number of bodies, pcs: 2-body
Distance between bodies, mm: 520
Soil working depth, mm: 300
Weight, kg: 200

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 438 active listings
  • Company
  • Registered for Yesterday
  • Дніпро, Дніпропетровська область, Україна
Recently viewed
AGROZIP AGROZIP Yesterday 12:27
Pro Soil treatment Дніпро Yesterday 12:27
Two-body plow PN-225 VN (beam 60 cm, Polish share, maximum adjustments) for mini tractor
10,900 ₴
Two-body plow PN-225 VN (beam 60 cm, Polish share, maximum adjustments) for mini tractor
Дніпро, Україна
Important mounted equipment - two-body plow PN-225 VN (beam 60 cm, Polish share, maximum adjustments) for mini tractor is designed for deep cultivation of arable land and preparation of virgin plots for sowing crops. It is distinguished by excellent productivity thanks to a sturdy frame and corresponding weight - 102 kg, it handles soils of varying complexit...
Yesterday Soil treatment вул. Тітова, 26
10,900 ₴
AGROZIP AGROZIP Yesterday 12:27
Pro Soil treatment Дніпро Yesterday 12:27
Three-furrow plow 3-20 (deep plowing up to 30 cm) for T-40 tractor Bomet
20,500 ₴
Three-furrow plow 3-20 (deep plowing up to 30 cm) for T-40 tractor Bomet
Дніпро, Україна
Mounted three-furrow plow Bomet 3-20 for the T-40 tractor and its analogues is designed for serious working loads, perfectly suited for tillage on fields not littered with stones and flagstone, with soils of any complexity. It is characterized by high productivity - up to 0.5 ha/h, at a working transport speed up to 12 km/h. The three-furrow plow is paired w...
Yesterday Soil treatment вул. Тітова, 26
20,500 ₴
БІЛОЦЕРКІВМАЗ БІЛОЦЕРКІВМАЗ Yesterday 13:08
Pro Spare parts Біла Церква Yesterday 13:08
Axle of disc harrow UDA UD 7.7.01
1,854 ₴
Axle of disc harrow UDA UD 7.7.01
Біла Церква, Україна
Axle of disc harrow UDA UD 7.7.01 Purpose: the main support part of the working unit on universal disc assemblies UDA.
Yesterday Spare parts бульвар М. Грушевського, 13
1,854 ₴
AGROZIP AGROZIP Yesterday 12:28
Vibrating single-row Poltava potato digger KK23 for Neva walk-behind tractor (two-eccentric)
9,800 ₴
Vibrating single-row Poltava potato digger KK23 for Neva walk-behind tractor (two-eccentric)
Дніпро, Україна
The new improved vibrating potato digger KK23, two-eccentric mechanical, for Neva walk-behind tractors was developed by a domestic manufacturer for effective harvesting work on medium and large plots, without weeds and haulm, with soils of varying difficulty. If these conditions are met, the unit demonstrates efficiency of over 90% on planted areas up to 2 h...
Yesterday Machines to harvest and process potatoes вул. Тітова, 26
9,800 ₴
AGROZIP AGROZIP Yesterday 12:31
Pro Seeders and seedlings Дніпро Yesterday 12:31
Two-row potato planter for mini-tractor KSNM2 (shelf hiller)
21,000 ₴
Two-row potato planter for mini-tractor KSNM2 (shelf hiller)
Дніпро, Україна
Purpose: Mechanized potato planting: Provides precise placement of tubers into the soil with even spacing. Ridge formation: Simultaneously forms ridges for optimal potato development. Time savings: Thanks to the two-row design, significantly speeds up the planting process. Structure and main components: Frame: Durable construction made of high-quality steel,...
Yesterday Seeders and seedlings вул. Тітова, 26
21,000 ₴
ДТЗ ДТЗ Yesterday 12:58
Pro Soil treatment Дніпро Yesterday 12:58
Rotary soil tiller FN-1.6
43,702 ₴
Rotary soil tiller FN-1.6
Дніпро, Україна
Description of rotary soil tiller FN-1.6 Rotary soil tillers are used for final pre-sowing soil cultivation in a single working pass, eliminating preliminary plowing and harrowing. At the same time, active crushing and mixing of the topsoil layer occurs, weeds are destroyed, crop residues and fertilizers are incorporated, the surface is leveled, optimal poro...
Yesterday Soil treatment вул. Надії Алексєєнко, 70
43,702 ₴
ДТЗ ДТЗ Yesterday 12:47
Pro Soil treatment Дніпро Yesterday 12:47
Universal Cultivator "DTZ" KU-2.0U
19,200 ₴
Universal Cultivator "DTZ" KU-2.0U
Дніпро, Україна
Description of the universal cultivator "DTZ" KU-2.0U: The reinforced universal cultivator is used both for general solid and for inter-row soil cultivation. During pre-sowing preparation it loosens and levels the top layer of soil, destroys weeds using cutting spear-shaped tines. To better level the surface and to ensure the height of ridges of loosened soi...
Yesterday Soil treatment вул. Надії Алексєєнко, 70
19,200 ₴
AGROZIP AGROZIP Yesterday 12:27
Pro Soil treatment Дніпро Yesterday 12:27
Two-share plow for mini tractor PLN-2-25
12,600 ₴
Two-share plow for mini tractor PLN-2-25
Дніпро, Україна
Compact lightweight two-share plow for mini tractor PLN-2-25 is designed for deep plowing of fields for sowing grain and industrial crops. It has a strong adjustable frame made of square steel tube, resistant to significant working loads. It is attached via a rear three-point hitch system to mini tractors with engines of at least 24 horsepower.The two workin...
Yesterday Soil treatment вул. Тітова, 26
12,600 ₴
AGROZIP AGROZIP Yesterday 12:28
Offset conveyor potato digger for motor-cultivator with hydraulics KK22 (offset)
17,100 ₴
Offset conveyor potato digger for motor-cultivator with hydraulics KK22 (offset)
Дніпро, Україна
New offset modernized conveyor vibratory potato digger for a motor-cultivator with hydraulics (Scout) KK22 has a number of features that noticeably increase the unit's productivity - hydraulic lift system, offset hitch mechanism, reinforced body with protective sides and excellent working characteristics - all this advantageously distinguishes this model.Thi...
Yesterday Machines to harvest and process potatoes вул. Тітова, 26
17,100 ₴
AGROZIP AGROZIP Yesterday 12:27
Pro Soil treatment Дніпро Yesterday 12:27
Left three-share plow PLN-3L-25SHp mounted for Virax tractor
17,800 ₴
Left three-share plow PLN-3L-25SHp mounted for Virax tractor
Дніпро, Україна
Aggregating vehicle: tractor Power of aggregating vehicle, hp: from 35 Number of shares, pcs: 3-share Share type: left Soil working depth, mm: 250 Weight, kg: 130 Working width, m: 0.75
Yesterday Soil treatment вул. Тітова, 26
17,800 ₴
ДТЗ ДТЗ Yesterday 13:03
Pro Tractors Дніпро Yesterday 13:03
Tractor KENTAVR 240BP/10
124,025 ₴
Tractor KENTAVR 240BP/10
Дніпро, Україна
Tractor KENTAVR 240BP/10 — a reliable assistant for daily work KENTAVR 240BP/10 — a simple and durable 24 hp tractor designed to perform basic agricultural tasks on small and medium farms. Thanks to the 4×2 wheel configuration and compact dimensions, it maneuvers easily even in tight conditions. Engine The model is equipped with a diesel 4-stroke engine with...
Yesterday Tractors вул. Надії Алексєєнко, 70
124,025 ₴
Call