Tractor Hanwo 404CDXU

506,240 ₴
Tractors
1 week
Україна
Дніпро Get directions →
вул. Надії Алексєєнко, 70
54 views
Published 1 week ago by ДТЗ
506,240 ₴
In Tractors category
вул. Надії Алексєєнко, 70, Дніпро, Україна
Get directions →
54 item views

TRACTOR HANWO 404CDXU: THINKING ABOUT THE PERSON, NOT JUST THE HECTARES Work draws you in and excites, but there comes a time when you should think about yourself too. The daily hard routine — in any weather and mood — quickly exhausts and drains your strength. But is true harmony of power and comfort possible, so you go to work with spark rather than by force? To answer that question, just look into the cab of the Hanwo 404CDXU tractor. ENGINE Under the hood there is already sound insulation and lighting for convenient maintenance. Reliable low-end pull is provided by the 4-cylinder naturally aspirated KM490VT with a displacement of 2545 cm³ and 40 hp. Air for it is prepared by a paper filter with an intake at the level of the cab roof, and an electric glow plug ensures easy starting in frost. Refueling the tractor is equally convenient — a 55 L polymer tank with a fuel return line is located just under the cab. TRANSMISSION AND CHASSIS The front portal axle with hub reductions provides 380 mm of agricultural clearance, and the reinforced rear half-axles easily withstand high torque. Thanks to front and rear counterweights, the 2195 kg tractor confidently maintains traction with the soil and develops a drawbar pull of 11 kN. Wide tires with a deep tread prevent slipping. The extended range of gears is provided by a reversible gearbox 8+8, and HST makes maneuvering easy. THREE-POINT HITCH Load capacity of the hitch is 680 kg; its lower links are reinforced from below and have removable balls for quick tool attachment and a spring damper that absorbs vibrations on the road. Hydraulic reliability is supported by a separate tank with a filter and 4 additional quick-release hydraulic couplings for complex equipment. The forced mode confidently plunges implements into the soil, and the compressor with receiver allows working with trailer brakes and inflating tires. COMFORT AND ELECTRICAL EQUIPMENT Now we are already in the cab. Panoramic glazing with wipers front and rear improves visibility, and a flat floor with a non-slip mat adds convenience. The anatomical seat is easy to adjust, and the levers are placed on side consoles with niches — right to hand. The electronic panel provides full information about system status, while the multimedia screen streams the camera image. Main LED lighting is successfully complemented by additional lights on the cab. Speaking about the Hanwo 404CDXU tractor, we are not talking about an ordinary workhorse for the field, but about a completely different work culture. When after a long and hard shift you step out of the cab without fatigue in your body and with satisfaction about what was done, you get a feeling of lightness and freedom.

Engine model: KM490VT
Engine type: Diesel, 4-stroke, direct injection
Number and arrangement of cylinders: 4, vertical
Engine displacement, cm³: 2545
Turbocharging: None
Rated engine power, hp (kW): 40 (29.4)
Air filter: Dry type: paper element, cyclone
Intake air heating: Electric glow plug
Fuel tank capacity, L: 55
Transmission type: Mechanical gear
Gear shift formula: (4x2)+(4x2)
Main gearbox: 4 forward, neutral, reverse
Additional reduction boxes: 2 gears, neutral
Separate reversible gearbox: Yes
Clutch: Two-stage, two-disc, continuously engaged type
Steering: Hydrostatic with separate pump and separate oil tank
Wheel formula: 4×4
Brakes: Rear, drum, mechanical, separate pedals for right and left wheel, synchronized simultaneous action of pedals
Theoretical forward speed, km/h: 2.1-32.1
Theoretical reverse speed, km/h: 1.8-28.9
Rear axle differential lock: Yes
Minimum turning radius without brakes, m: 3.5
Minimum turning radius with brakes, m: 3
Rated drawbar pull, kN: 11
Overall dimensions (L×W×H), mm: 3600×1520×2060
Operating weight, kg: 2207
Front tire size: 7.5-20
Rear tire size: 11.2-28
Wheelbase, mm: 1880
Front track, mm: 1200
Rear track, mm: 1200
Agrotechnical clearance, mm: 380
Ground clearance, mm: 420
Additional front/rear weights, (units × kg): 8×12 / 2×20
Rear hitch: Universal, 3-point
Hydraulic lift drive: 2 hydraulic cylinders
Maximum hitch load capacity, kg: 680
Towing device: Removable swinging drawpin
PTO speeds, rpm: 540-1000
Hydraulic oil tank capacity, L: 8.9

Read more

Published on 2026/10/11. Modified on 2026/10/20.

Description

TRACTOR HANWO 404CDXU: THINKING ABOUT THE PERSON, NOT JUST THE HECTARES Work draws you in and excites, but there comes a time when you should think about yourself too. The daily hard routine — in any weather and mood — quickly exhausts and drains your strength. But is true harmony of power and comfort possible, so you go to work with spark rather than by force? To answer that question, just look into the cab of the Hanwo 404CDXU tractor. ENGINE Under the hood there is already sound insulation and lighting for convenient maintenance. Reliable low-end pull is provided by the 4-cylinder naturally aspirated KM490VT with a displacement of 2545 cm³ and 40 hp. Air for it is prepared by a paper filter with an intake at the level of the cab roof, and an electric glow plug ensures easy starting in frost. Refueling the tractor is equally convenient — a 55 L polymer tank with a fuel return line is located just under the cab. TRANSMISSION AND CHASSIS The front portal axle with hub reductions provides 380 mm of agricultural clearance, and the reinforced rear half-axles easily withstand high torque. Thanks to front and rear counterweights, the 2195 kg tractor confidently maintains traction with the soil and develops a drawbar pull of 11 kN. Wide tires with a deep tread prevent slipping. The extended range of gears is provided by a reversible gearbox 8+8, and HST makes maneuvering easy. THREE-POINT HITCH Load capacity of the hitch is 680 kg; its lower links are reinforced from below and have removable balls for quick tool attachment and a spring damper that absorbs vibrations on the road. Hydraulic reliability is supported by a separate tank with a filter and 4 additional quick-release hydraulic couplings for complex equipment. The forced mode confidently plunges implements into the soil, and the compressor with receiver allows working with trailer brakes and inflating tires. COMFORT AND ELECTRICAL EQUIPMENT Now we are already in the cab. Panoramic glazing with wipers front and rear improves visibility, and a flat floor with a non-slip mat adds convenience. The anatomical seat is easy to adjust, and the levers are placed on side consoles with niches — right to hand. The electronic panel provides full information about system status, while the multimedia screen streams the camera image. Main LED lighting is successfully complemented by additional lights on the cab. Speaking about the Hanwo 404CDXU tractor, we are not talking about an ordinary workhorse for the field, but about a completely different work culture. When after a long and hard shift you step out of the cab without fatigue in your body and with satisfaction about what was done, you get a feeling of lightness and freedom.

Engine model: KM490VT
Engine type: Diesel, 4-stroke, direct injection
Number and arrangement of cylinders: 4, vertical
Engine displacement, cm³: 2545
Turbocharging: None
Rated engine power, hp (kW): 40 (29.4)
Air filter: Dry type: paper element, cyclone
Intake air heating: Electric glow plug
Fuel tank capacity, L: 55
Transmission type: Mechanical gear
Gear shift formula: (4x2)+(4x2)
Main gearbox: 4 forward, neutral, reverse
Additional reduction boxes: 2 gears, neutral
Separate reversible gearbox: Yes
Clutch: Two-stage, two-disc, continuously engaged type
Steering: Hydrostatic with separate pump and separate oil tank
Wheel formula: 4×4
Brakes: Rear, drum, mechanical, separate pedals for right and left wheel, synchronized simultaneous action of pedals
Theoretical forward speed, km/h: 2.1-32.1
Theoretical reverse speed, km/h: 1.8-28.9
Rear axle differential lock: Yes
Minimum turning radius without brakes, m: 3.5
Minimum turning radius with brakes, m: 3
Rated drawbar pull, kN: 11
Overall dimensions (L×W×H), mm: 3600×1520×2060
Operating weight, kg: 2207
Front tire size: 7.5-20
Rear tire size: 11.2-28
Wheelbase, mm: 1880
Front track, mm: 1200
Rear track, mm: 1200
Agrotechnical clearance, mm: 380
Ground clearance, mm: 420
Additional front/rear weights, (units × kg): 8×12 / 2×20
Rear hitch: Universal, 3-point
Hydraulic lift drive: 2 hydraulic cylinders
Maximum hitch load capacity, kg: 680
Towing device: Removable swinging drawpin
PTO speeds, rpm: 540-1000
Hydraulic oil tank capacity, L: 8.9

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 310 active listings
  • Company
  • Registered for 1 week
  • Дніпро, Дніпропетровська область, Україна
Call