Tractor HORST A 404CU
Engine model: KM490BT
Engine type: Diesel, 4-stroke, direct injection, water-cooled
Number and arrangement of cylinders: 4, inline, vertical
Engine displacement, cm³: 2544
Turbocharging: None
Rated engine power, hp (kW): 40 (29.4)
Air filter: Contact-oil: high air intake with transparent cyclone, oil bath, metal mesh
Intake manifold air heater: Electric-pilot (torch) type
Fuel tank capacity, L: 50
Transmission type: Mechanical multi-speed
Gear shifting formula: (4+1)x2
Main gearbox: 4 forward, neutral, reverse
Additional reduction gearboxes: 2 gears, neutral
Separate reverser gearbox: None
Clutch: Single-acting, single-disc, normally closed type
Steering: Hydrostatic, separate hydraulic pump, two-way hydraulic cylinder on front axle, oil tank separate from hydraulic system
Wheel formula: 4×4
Brakes: Rear, drum, mechanical, separate pedals for right and left wheel, synchronization for simultaneous pedal operation
Theoretical forward speed, km/h: 3.1–42.7
Theoretical reverse speed, km/h: 3.0–41.6
Rear axle differential lock: Forced, splined coupling, engagement by lever from the driver’s position
Minimum turning radius without brakes, m: 3.4
Minimum turning radius with brakes, m: 3.8
Rated drawbar pull, kN: 9.2
Overall dimensions (L×W×H), mm: 3530×1470×2690
Operating weight, kg: 2060
Front tire size: 7.50–20
Rear tire size: 11.2–28
Wheelbase, mm: 1815
Front track, mm: 1200
Rear track, mm: 1400
Agrotechnical ground clearance, mm: 550
Clearance, mm: 420
Additional front/rear weights (units × kg): 8×11/2×2×25
Rear hitch system: Universal, 3-point
Hydraulic lift drive: Two-cylinder, two-way, with built-in safety valve
Maximum hitch load capacity, kg: 600
Towing device: Quick-release with locking
PTO shaft speeds (RPM): 540-1000
Hydraulic system oil tank capacity, L: 9
Published on 2026/10/11
Engine model: KM490BT
Engine type: Diesel, 4-stroke, direct injection, water-cooled
Number and arrangement of cylinders: 4, inline, vertical
Engine displacement, cm³: 2544
Turbocharging: None
Rated engine power, hp (kW): 40 (29.4)
Air filter: Contact-oil: high air intake with transparent cyclone, oil bath, metal mesh
Intake manifold air heater: Electric-pilot (torch) type
Fuel tank capacity, L: 50
Transmission type: Mechanical multi-speed
Gear shifting formula: (4+1)x2
Main gearbox: 4 forward, neutral, reverse
Additional reduction gearboxes: 2 gears, neutral
Separate reverser gearbox: None
Clutch: Single-acting, single-disc, normally closed type
Steering: Hydrostatic, separate hydraulic pump, two-way hydraulic cylinder on front axle, oil tank separate from hydraulic system
Wheel formula: 4×4
Brakes: Rear, drum, mechanical, separate pedals for right and left wheel, synchronization for simultaneous pedal operation
Theoretical forward speed, km/h: 3.1–42.7
Theoretical reverse speed, km/h: 3.0–41.6
Rear axle differential lock: Forced, splined coupling, engagement by lever from the driver’s position
Minimum turning radius without brakes, m: 3.4
Minimum turning radius with brakes, m: 3.8
Rated drawbar pull, kN: 9.2
Overall dimensions (L×W×H), mm: 3530×1470×2690
Operating weight, kg: 2060
Front tire size: 7.50–20
Rear tire size: 11.2–28
Wheelbase, mm: 1815
Front track, mm: 1200
Rear track, mm: 1400
Agrotechnical ground clearance, mm: 550
Clearance, mm: 420
Additional front/rear weights (units × kg): 8×11/2×2×25
Rear hitch system: Universal, 3-point
Hydraulic lift drive: Two-cylinder, two-way, with built-in safety valve
Maximum hitch load capacity, kg: 600
Towing device: Quick-release with locking
PTO shaft speeds (RPM): 540-1000
Hydraulic system oil tank capacity, L: 9
Contact the seller
User is offline
- 309 active listings
- Company
- Registered for Yesterday
- Дніпро, Дніпропетровська область, Україна