Tractor KENTAVR B 504U
TRACTOR KENTAVR B 504U: HOW TO PACK A HERD OF HORSES INTO A COMPACT FORMAT? You need to give it your all and full power, but sometimes there are “delicate” tasks when you need to slip under tree branches? And what to do if the budget straps are tightly fastened, but you need to work right now and with rock‑solid confidence in the machine and with modern features at hand? Then the choice is obvious — the KENTAVR B 504U tractor. ENGINE Access to under the hood is convenient: pull the lever and the hood smoothly lifts on gas springs. Inside — a classic KM engine with a 95 piston delivering 50 horsepower. In cold weather an electric glow plug helps with starting, and the engine is shut off simply with the key. Clean air is provided by an efficient paper filter with a vacuum blockage indicator. And for refueling, a plastic tank with an additional filter is hidden under the driver’s platform. TRANSMISSION AND CHASSIS A reinforced portal structure is installed at the front, and the rear half-shafts are simply striking in strength. Disassemblable rims allow flexible adjustment of the track width. Both axles are ballasted for better tire traction with a classic “herringbone” tread (8.30-20 front and 12.4-28 rear), and steering is remarkably easy thanks to the hydrostatic power steering. All this power is controlled by a mechanical gear transmission with a two-stage clutch of the constantly engaged type, which provides 8 speeds forward and 8 reverse. THREE‑POINT HITCH SYSTEM The independence of the hydrostatic power steering is ensured by its own tank with a filter, and reinforced lower links with replaceable balls allow attaching implements in minutes. A central link with a damper absorbs vibrations in motion. Thanks to forced hydraulics, the hitch can be pressed into the soil, and two pairs of hydraulic outputs with quick‑release couplings easily connect implements. There is also a compressor with a blow gun, and the PTO is ready to deliver 540 or 1000 rpm. COMFORT AND ELECTRICAL EQUIPMENT Sit in a wide seat with a high back and armrests that can be adjusted to suit you. The steering wheel with a comfortable grip and quick‑turn handle is tilt‑adjustable together with an animated panel that shows the full picture of the tractor’s condition, up to oil pressure. Moisture‑protected buttons and a USB port are always at hand, and fuses will indicate by LED if something fails. The onboard network is powered by a 750 W generator. Yes, it is without a cab, but that is only a plus: with 50 horses under the hood you get pure power without overpaying, and most importantly — maneuverability. Where others simply “get stuck”, the Kentavr B 504U will pass through without problems. Only honest power and full freedom of action!
Engine model: KM495
Engine type: Diesel, 4‑stroke, direct injection
Number and arrangement of cylinders: 3, vertical
Engine displacement, cm³: 3170
Turbocharging: None
Air filter: Dry type: paper element, cyclone
Intake manifold air heating: Electric glow plug
Fuel tank capacity, l: 50
Transmission type: Mechanical gear
Gear shifting formula: (4×2)+(4×2)
Main gearbox: 4 forward, neutral, reverse
Additional reduction gearboxes: 2 gears, neutral
Separate reversing gearbox: Forward‑neutral‑reverse
Clutch: Two‑stage, two‑disk, constantly engaged type
Steering: Hydrostatic with separate pump and separate oil tank
Wheel formula: 4×4
Brakes: Rear, drum, mechanical, split pedals for right and left wheel, synchronization of simultaneous pedal action
Theoretical forward speed, km/h: N/A
Theoretical reverse speed, km/h: N/A
Rear axle differential lock: Yes
Minimum turning radius without brakes, m: N/A
Minimum turning radius with brakes, m: N/A
Nominal traction force, kN: N/A
Overall dimensions (L×W×H), mm: 3360×1630×2080
Operating weight, kg: 1980
Front tire size: 8.3-20
Rear tire size: 12.4-28
Wheelbase, mm: 1850
Front track width, mm: 1290
Rear track width, mm: 1340
Agrotechnical clearance, mm: 500
Ground clearance, mm: 420
Additional front/rear weights, (pcs × kg): 6×15 / 2×2×25
Rear hitch system: Universal, 3‑point
Hydraulic lift drive: 2 hydraulic cylinders
Maximum load capacity of hitch mechanism, kg: N/A
Towing device: Removable pendulum trunnion
Power take‑off (PTO) speed, rpm: 540-1000
Hydraulic system oil tank capacity, l: N/A
Hydraulic outlets for connecting mounted equipment: 4 (2 pressure/return, 2 return) with quick‑release couplings, controlled from the main hydraulic distributor
Published on 2026/10/11
TRACTOR KENTAVR B 504U: HOW TO PACK A HERD OF HORSES INTO A COMPACT FORMAT? You need to give it your all and full power, but sometimes there are “delicate” tasks when you need to slip under tree branches? And what to do if the budget straps are tightly fastened, but you need to work right now and with rock‑solid confidence in the machine and with modern features at hand? Then the choice is obvious — the KENTAVR B 504U tractor. ENGINE Access to under the hood is convenient: pull the lever and the hood smoothly lifts on gas springs. Inside — a classic KM engine with a 95 piston delivering 50 horsepower. In cold weather an electric glow plug helps with starting, and the engine is shut off simply with the key. Clean air is provided by an efficient paper filter with a vacuum blockage indicator. And for refueling, a plastic tank with an additional filter is hidden under the driver’s platform. TRANSMISSION AND CHASSIS A reinforced portal structure is installed at the front, and the rear half-shafts are simply striking in strength. Disassemblable rims allow flexible adjustment of the track width. Both axles are ballasted for better tire traction with a classic “herringbone” tread (8.30-20 front and 12.4-28 rear), and steering is remarkably easy thanks to the hydrostatic power steering. All this power is controlled by a mechanical gear transmission with a two-stage clutch of the constantly engaged type, which provides 8 speeds forward and 8 reverse. THREE‑POINT HITCH SYSTEM The independence of the hydrostatic power steering is ensured by its own tank with a filter, and reinforced lower links with replaceable balls allow attaching implements in minutes. A central link with a damper absorbs vibrations in motion. Thanks to forced hydraulics, the hitch can be pressed into the soil, and two pairs of hydraulic outputs with quick‑release couplings easily connect implements. There is also a compressor with a blow gun, and the PTO is ready to deliver 540 or 1000 rpm. COMFORT AND ELECTRICAL EQUIPMENT Sit in a wide seat with a high back and armrests that can be adjusted to suit you. The steering wheel with a comfortable grip and quick‑turn handle is tilt‑adjustable together with an animated panel that shows the full picture of the tractor’s condition, up to oil pressure. Moisture‑protected buttons and a USB port are always at hand, and fuses will indicate by LED if something fails. The onboard network is powered by a 750 W generator. Yes, it is without a cab, but that is only a plus: with 50 horses under the hood you get pure power without overpaying, and most importantly — maneuverability. Where others simply “get stuck”, the Kentavr B 504U will pass through without problems. Only honest power and full freedom of action!
Engine model: KM495
Engine type: Diesel, 4‑stroke, direct injection
Number and arrangement of cylinders: 3, vertical
Engine displacement, cm³: 3170
Turbocharging: None
Air filter: Dry type: paper element, cyclone
Intake manifold air heating: Electric glow plug
Fuel tank capacity, l: 50
Transmission type: Mechanical gear
Gear shifting formula: (4×2)+(4×2)
Main gearbox: 4 forward, neutral, reverse
Additional reduction gearboxes: 2 gears, neutral
Separate reversing gearbox: Forward‑neutral‑reverse
Clutch: Two‑stage, two‑disk, constantly engaged type
Steering: Hydrostatic with separate pump and separate oil tank
Wheel formula: 4×4
Brakes: Rear, drum, mechanical, split pedals for right and left wheel, synchronization of simultaneous pedal action
Theoretical forward speed, km/h: N/A
Theoretical reverse speed, km/h: N/A
Rear axle differential lock: Yes
Minimum turning radius without brakes, m: N/A
Minimum turning radius with brakes, m: N/A
Nominal traction force, kN: N/A
Overall dimensions (L×W×H), mm: 3360×1630×2080
Operating weight, kg: 1980
Front tire size: 8.3-20
Rear tire size: 12.4-28
Wheelbase, mm: 1850
Front track width, mm: 1290
Rear track width, mm: 1340
Agrotechnical clearance, mm: 500
Ground clearance, mm: 420
Additional front/rear weights, (pcs × kg): 6×15 / 2×2×25
Rear hitch system: Universal, 3‑point
Hydraulic lift drive: 2 hydraulic cylinders
Maximum load capacity of hitch mechanism, kg: N/A
Towing device: Removable pendulum trunnion
Power take‑off (PTO) speed, rpm: 540-1000
Hydraulic system oil tank capacity, l: N/A
Hydraulic outlets for connecting mounted equipment: 4 (2 pressure/return, 2 return) with quick‑release couplings, controlled from the main hydraulic distributor
Contact the seller
User is offline
- 309 active listings
- Company
- Registered for Yesterday
- Дніпро, Дніпропетровська область, Україна