Report

1 images

Hybrid inverter SUN‑100K‑SG02HP3‑EU‑GM10 Deye Wi‑Fi (100 kW, 3‑phase, 10 MPPT, HV)

335,220 ₴

Generators

Sunday 11:53

Україна

Київ Get directions →

вул. Стеценка, 14/44

22 views

Published 4 days ago by Solar-Tech

335,220 ₴

In Generators category

вул. Стеценка, 14/44, Київ, Україна

Get directions →

22 item views

Deye SUN‑100K‑SG02HP3‑EU‑GM10 — is a three‑phase high‑voltage hybrid inverter for 100 kW solar power plants. It converts direct current (DC) from solar panels into alternating current (AC) that can be used to power equipment or fed into the grid under a “Green tariff”.

Features:

-
Three‑phase output 220/380 V or 230/400 V with a pure sine wave provides stable power for equipment and electronics.

-
Support for HV batteries 160–1000 V, 2 battery inputs, total charge/discharge current 100 A + 100 A.

-
10 MPPT (2 strings per each, total 20 strings) — flexible layout for large PV fields.

-
AC‑coupling, parallel operation up to 10 inverters, 100% phase imbalance allowed; 6 programmable charge/discharge periods.

-
Wide PV range: Max PV Access Power 200 kW, Max PV Input Power 160 kW, MPPT 150–850 V, start 180 V, nominal 650 V.

-
Max AC passthrough 250 A, configurable power factor (0.8…0.8 lead/lag).

-
Built‑in protections, surge protection Type II (DC/AC), optionally AFCI; THDi 99%.

-
Ingress protection IP65, operation at –40…+60 °C (derating above +45 °C), intelligent air cooling, noise up to 65 dB(A).

-
Support for remote monitoring: Wi‑Fi/GPRS/Bluetooth/4G/LAN (optional).

Advantages:

-
High power 100 kW — for large commercial and industrial facilities.

-
Three‑phase output and pure sine wave — correct operation of critical loads.

-
Flexible architecture (10 MPPT, 20 strings; DC and AC coupling) — adaptation to site conditions.

-
Extended protections and high efficiency (up to 98.7%) — reliability and efficiency.

-
Scalability (parallel up to 10 units) and remote monitoring — ease of operation

Application

:The inverter is used at sites with high energy consumption:

-
industrial enterprises,

-
solar power plants (C&I ESS),

-
infrastructure and medical facilities,

-
shopping centers,

-
business and residential complexes.

Technical specifications:

Battery input data

Battery type

lithium

Battery voltage range, V

160-1000

Maximum discharge current, A

100+100

Maximum discharge current, A

100+100

Number of battery inputs

Lithium battery charging strategy

adaptation to BMS

DC input (photovoltaic side)

Maximum input power, W

200 000

Maximum input voltage, V

1000

Start voltage, V

180

MPPT range, V

150-850

DC voltage range at full load, V

150–850

Nominal DC input voltage, V

650

PV input current, A

42+42+42+42+42+42+42+42+42+42

Maximum short‑circuit current, A

63+63+63+63+63+63+63+63+63+63

Number of MPPT trackers

Number of strings per tracker

2+2+2+2+2+2+2+2+2+2

AC output data

Rated AC output power, W

100 000

Max. AC output power, W

110 000

Rated AC output current, A

151.6 / 145.0 (for 380/400 V)

Maximum AC current, A

166.7 / 159.5 (for 380/400 V)

Max. 3‑phase unbalanced output current, A

250

Maximum continuous passthrough current (transit), A

120

Generator input/smart load/AC coupling, A

151.6 (at 220/380 V) or 145.0 (at 230/400 V) / not available (no dedicated port) / 250

Input frequency and voltage, V

50/45–55; 60/55–65; 3L/N/PE 220/380, 230/400

Grid type

three phase

Efficiency

Maximum efficiency, %

98.7

Efficiency by Euro classification, %

98.1

MPPT efficiency, %

> 99

Protection

Integrated

DC‑reverse polarity, AC‑overload/overvoltage, short circuit, thermal protection, DC‑component monitoring, Anti‑islanding, RCD; optionally AFCI

Output overvoltage protection

DC type II / AC type III

General data

Operating temperature, °C

-40...60

Cooling

forced intelligent

Noise level, dB

≤65 dB

Environmental protection rating

IP65

Physical characteristics

Dimensions, mm

734 × 1091 × 344

Weight, kg

≈ 161.7

Published on 2026/10/11

Description