Hot water storage tank enamelled TEPLOBAK BTE-1-500

Hot water storage tank enamelled TEPLOBAK BTE-1-500

54,405 ₴
Other
Sunday 11:55
Україна
вул. Стеценка, 14/44
18 views
Published 4 days ago by Solar-Tech
54,405 ₴
In Other category
вул. Стеценка, 14/44, Київ, Україна
Get directions →
18 item views

A wide range of volumes of BTE-1 boilers (from 160 to 500 liters) allows satisfying any hot water needs both in single-family and multi-apartment houses, as well as in commercial and administrative buildings.

The heater tank is made of black steel, and its inner surface is coated with high-quality enamel to provide corrosion protection.

The BTE-1 model has a large-area heat exchanger for connection to any heat sources and for the fastest possible heating of hot water in the heater tank.

-

Volume from 160 to 500 liters;

-

magnesium anode to provide additional anti-corrosion protection;

-

side inspection flange;

-

high-quality insulation made of rigid polyurethane foam 50 mm thick;

-

opening for installation of an electric heating element (TEN);

-

supplied with a thermometer.

Technical specifications:

Nominal volume, l

452

Maximum working pressure, bar

8

Maximum working pressure of the heat exchanger, bar

6

Maximum operating temperature, ºC

95

Heat exchanger area, m2

2.06

Internal volume of the heat exchanger, (l)

12.44

Change in power in continuous operation mode (maximum heat exchanger output) *60-80 ºC, kW

52

Heat losses

2.5 kWh/24h

Material of the inner tank

enameled steel

Insulation

rigid PUF

Dimensions (HxØDxØd see drawing), mm

1900х700х600

Net weight, kg

147

Read more

Published on 2026/10/11

Description

A wide range of volumes of BTE-1 boilers (from 160 to 500 liters) allows satisfying any hot water needs both in single-family and multi-apartment houses, as well as in commercial and administrative buildings.

The heater tank is made of black steel, and its inner surface is coated with high-quality enamel to provide corrosion protection.

The BTE-1 model has a large-area heat exchanger for connection to any heat sources and for the fastest possible heating of hot water in the heater tank.

-

Volume from 160 to 500 liters;

-

magnesium anode to provide additional anti-corrosion protection;

-

side inspection flange;

-

high-quality insulation made of rigid polyurethane foam 50 mm thick;

-

opening for installation of an electric heating element (TEN);

-

supplied with a thermometer.

Technical specifications:

Nominal volume, l

452

Maximum working pressure, bar

8

Maximum working pressure of the heat exchanger, bar

6

Maximum operating temperature, ºC

95

Heat exchanger area, m2

2.06

Internal volume of the heat exchanger, (l)

12.44

Change in power in continuous operation mode (maximum heat exchanger output) *60-80 ºC, kW

52

Heat losses

2.5 kWh/24h

Material of the inner tank

enameled steel

Insulation

rigid PUF

Dimensions (HxØDxØd see drawing), mm

1900х700х600

Net weight, kg

147

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 538 active listings
  • Company
  • Registered for Sunday
  • Київ, Київська область, Україна
Call