Hot water storage tank enamelled TEPLOBAK BTE-1-PLUS-500

Hot water storage tank enamelled TEPLOBAK BTE-1-PLUS-500

84,575 ₴
Other
Sunday 11:55
Україна
вул. Стеценка, 14/44
14 views
Published 4 days ago by Solar-Tech
84,575 ₴
In Other category
вул. Стеценка, 14/44, Київ, Україна
Get directions →
14 item views

A wide range of volumes of BTE-1-PLUS boilers (from 200 to 500 liters) allows meeting any hot water needs both in single-family and apartment buildings, as well as in commercial and administrative buildings.

The heater tank is made of black steel, and its inner surface is coated with high-quality enamel to provide corrosion protection.

The BTE-1-PLUS model has a heat exchanger with an increased area for more efficient use in systems where the heat source is a heat pump.

-
Volume from 200 to 500 liters;

-
heat exchanger with increased area for operation with low-temperature systems;

-
magnesium anode to provide additional anti-corrosion protection;

-
side inspection flange;

-
high-quality thermal insulation made of rigid polyurethane foam with a thickness of 50 mm;

-
comes with a thermometer.

Technical specifications:

Nominal volume, l

429

Maximum working pressure, bar

8

Maximum working pressure of the heat exchanger, bar

6

Maximum operating temperature, ºC

95

Heat exchanger area, m2

6

Internal volume of the heat exchanger, (l)

29

Change in power in continuous operation mode (maximum output of the heat exchanger) *60-80/70-90 ºC, kW

144/194

Heat losses

2.5 kWh/24h

Material of the inner tank

enamelled steel

Insulation

rigid PU foam

Dimensions (HxØDxØd see fig.), mm

1900х700х600

Net weight, kg

211

  • — outlet temperature of the heat carrier
Read more

Published on 2026/10/11

Description

A wide range of volumes of BTE-1-PLUS boilers (from 200 to 500 liters) allows meeting any hot water needs both in single-family and apartment buildings, as well as in commercial and administrative buildings.

The heater tank is made of black steel, and its inner surface is coated with high-quality enamel to provide corrosion protection.

The BTE-1-PLUS model has a heat exchanger with an increased area for more efficient use in systems where the heat source is a heat pump.

-
Volume from 200 to 500 liters;

-
heat exchanger with increased area for operation with low-temperature systems;

-
magnesium anode to provide additional anti-corrosion protection;

-
side inspection flange;

-
high-quality thermal insulation made of rigid polyurethane foam with a thickness of 50 mm;

-
comes with a thermometer.

Technical specifications:

Nominal volume, l

429

Maximum working pressure, bar

8

Maximum working pressure of the heat exchanger, bar

6

Maximum operating temperature, ºC

95

Heat exchanger area, m2

6

Internal volume of the heat exchanger, (l)

29

Change in power in continuous operation mode (maximum output of the heat exchanger) *60-80/70-90 ºC, kW

144/194

Heat losses

2.5 kWh/24h

Material of the inner tank

enamelled steel

Insulation

rigid PU foam

Dimensions (HxØDxØd see fig.), mm

1900х700х600

Net weight, kg

211

  • — outlet temperature of the heat carrier
    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 538 active listings
  • Company
  • Registered for Sunday
  • Київ, Київська область, Україна
Recently viewed
Solar-Tech Solar-Tech Sunday 11:53
Pro Other Київ Sunday 11:53
Thermosiphon solar system with ship-grade steel tank Altek SP-CL-24
55,311 ₴
Thermosiphon solar system with ship-grade steel tank Altek SP-CL-24
Київ, Україна
The Altek SP-CL-24 solar system consists of high-quality components. The thermosiphon non-pressurized seasonal water heater is assembled from individual vacuum tubes. Solar radiation energy is absorbed by the absorber and converted into heat to warm the water, and thanks to an effective selective coating the efficiency of the solar collector is increased. Th...
Sunday Other вул. Стеценка, 14/44
55,311 ₴
Solar-Tech Solar-Tech Sunday 11:53
Pro Generators Київ Sunday 11:53
End clamp 35 mm, part
50 ₴
End clamp 35 mm, part
Київ, Україна
End clamp for a photo module with a frame thickness of 35 mm is used to attach solar panels to the support profile. Material: Aluminum AD31T1; Anodizing A15. Minimum order of 10 pcs.
Sunday Generators вул. Стеценка, 14/44
50 ₴
Call