Three-row garlic and onion planter ChS24 (chain with double spoon Ø34, Ø24.5) to

26,100 ₴
Seeders and seedlings
Today 12:26
Україна
Дніпро Get directions →
вул. Тітова, 26
5 views
Published 11 hours ago by AGROZIP
26,100 ₴
вул. Тітова, 26, Дніпро, Україна
Get directions →
5 item views

Three-row garlic planter ChS24 (chain with double spoon Ø34, Ø24.5) is intended for coupling with mini-tractors. The design of the hitch unit is calculated for three-point mounting and the use of a hydraulic lift system.
The hitch unit has double-sided pins with diameters of 22 and 27 mm. The garlic planter is designed for use with equipment with power up to 24 hp. When using the garlic planter with equipment more powerful than 24 hp, a limited warranty is provided. In such cases it is necessary to work with caution, monitoring the loads on the planter units.
Purpose and conditions of use
The garlic planter is intended for planting garlic cloves, single-clove garlic and onion-sets in previously cultivated and prepared soils, with soil moisture not more than 30%. For planting it is necessary to use calibrated planting material sized 15-35 mm.
Design features of the garlic planter
Supplied complete with a chain (ChSd5) which has double-sided spoons. The use of a chain with double-sided spoons makes the garlic planter universal and allows the buyer to plant cloves and single-clove garlic sized from 15 to 35 mm.
The garlic planter has a sectional design. Each row uses a separate section with a conveyor and a hopper for planting material. The capacity of one hopper is 10 liters.
The drive of the dosing mechanism is carried out from the support-drive wheels. This product uses a single-shaft drive system for the dosing mechanism. Row spacing: 110 mm, 125 mm and 140 mm, is adjusted by changing the gear ratio on the chain gearbox. A tensioner is used to compensate for the chain length. The coulter and furrow closers are adjustable. Planting depth - 60-80 mm. The inter-row width is adjustable in the range from 200 to 400 mm.
Track width – 1400 mm.
For convenience of connection the planter is equipped with two removable handles. During operation the handles must be detached.
Completeness:
hopper – 3 pcs.;conveyor – 3 pcs.;frame – 1 pc.;support-drive wheel – 2 pcs.;chain drive – 1 pc.Additional equipment - row marker.
Overall dimensions – 1580*1200*930 mm.
Weight – 81.2 kg.
Dear buyers! The design, color and equipment of products manufactured by "Kryuchkov" may not match the photo on the official website. Before purchase clarify the parameters and characteristics that are important to you.
Before shipping the garlic planter be sure to agree with the manager the compatibility of the equipment with your tractor.

Aggregrating vehicle: mini-tractor
Power of the aggregrating vehicle, hp: from 10
Type of coulter: keel-shaped (anchor)
Sowing step in row, mm: 110/125/140
Planting depth of seeds, mm: from 60 to 80
Seeding rate of garlic cloves, pcs: 7-10 per 1 meter
Drive of the seed dosing mechanism: from ground-engaging wheels
Number of rows sown simultaneously, pcs: 3
Hopper capacity for seed, l: 10 (3 hoppers)
Inter-row interval, mm: from 200 to 400
Weight, kg: 82
Manufacturer: Kryuchkov
Type of seeding mechanism: spoon-type
Spoon diameter, mm: 34; 24.5 (two interchangeable spoons)

Read more

Published on 2026/10/11

Description

Three-row garlic planter ChS24 (chain with double spoon Ø34, Ø24.5) is intended for coupling with mini-tractors. The design of the hitch unit is calculated for three-point mounting and the use of a hydraulic lift system.
The hitch unit has double-sided pins with diameters of 22 and 27 mm. The garlic planter is designed for use with equipment with power up to 24 hp. When using the garlic planter with equipment more powerful than 24 hp, a limited warranty is provided. In such cases it is necessary to work with caution, monitoring the loads on the planter units.
Purpose and conditions of use
The garlic planter is intended for planting garlic cloves, single-clove garlic and onion-sets in previously cultivated and prepared soils, with soil moisture not more than 30%. For planting it is necessary to use calibrated planting material sized 15-35 mm.
Design features of the garlic planter
Supplied complete with a chain (ChSd5) which has double-sided spoons. The use of a chain with double-sided spoons makes the garlic planter universal and allows the buyer to plant cloves and single-clove garlic sized from 15 to 35 mm.
The garlic planter has a sectional design. Each row uses a separate section with a conveyor and a hopper for planting material. The capacity of one hopper is 10 liters.
The drive of the dosing mechanism is carried out from the support-drive wheels. This product uses a single-shaft drive system for the dosing mechanism. Row spacing: 110 mm, 125 mm and 140 mm, is adjusted by changing the gear ratio on the chain gearbox. A tensioner is used to compensate for the chain length. The coulter and furrow closers are adjustable. Planting depth - 60-80 mm. The inter-row width is adjustable in the range from 200 to 400 mm.
Track width – 1400 mm.
For convenience of connection the planter is equipped with two removable handles. During operation the handles must be detached.
Completeness:
hopper – 3 pcs.;conveyor – 3 pcs.;frame – 1 pc.;support-drive wheel – 2 pcs.;chain drive – 1 pc.Additional equipment - row marker.
Overall dimensions – 1580*1200*930 mm.
Weight – 81.2 kg.
Dear buyers! The design, color and equipment of products manufactured by "Kryuchkov" may not match the photo on the official website. Before purchase clarify the parameters and characteristics that are important to you.
Before shipping the garlic planter be sure to agree with the manager the compatibility of the equipment with your tractor.

Aggregrating vehicle: mini-tractor
Power of the aggregrating vehicle, hp: from 10
Type of coulter: keel-shaped (anchor)
Sowing step in row, mm: 110/125/140
Planting depth of seeds, mm: from 60 to 80
Seeding rate of garlic cloves, pcs: 7-10 per 1 meter
Drive of the seed dosing mechanism: from ground-engaging wheels
Number of rows sown simultaneously, pcs: 3
Hopper capacity for seed, l: 10 (3 hoppers)
Inter-row interval, mm: from 200 to 400
Weight, kg: 82
Manufacturer: Kryuchkov
Type of seeding mechanism: spoon-type
Spoon diameter, mm: 34; 24.5 (two interchangeable spoons)

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 438 active listings
  • Company
  • Registered for Today
  • Дніпро, Дніпропетровська область, Україна
Recently viewed
AGROZIP AGROZIP Today 12:26
Two-row garlic and onion planter Bizon-2mb for walk-behind tractor garlic planter
16,000 ₴
Two-row garlic and onion planter Bizon-2mb for walk-behind tractor garlic planter
Дніпро, Україна
High-precision 2-row garlic planter Bizon CHS-2 is designed for single-point mounting of the walk-behind tractor type. An excellent solution for efficient garlic planting: the Bizon CHS-2 garlic planter combines excellent quality and ease of use. The Bizon CHS-2 garlic planter is an indispensable mounted tool for gardeners and farmers who seek high productiv...
Today Seeders and seedlings вул. Тітова, 26
16,000 ₴
AGROZIP AGROZIP Today 12:32
Pro Sprayers Дніпро Today 12:32
Single-sided herbicide boom JAR-MET for field (orchard) tractor sprayer GSh-1
9,000 ₴
Single-sided herbicide boom JAR-MET for field (orchard) tractor sprayer GSh-1
Дніпро, Україна
Tractor type: compact tractor Pump flow rate, l/min: 120 Boom length, m: 8 Manufacturer: Jar-Met Weight, kg: 120
Today Sprayers вул. Тітова, 26
9,000 ₴
AGROZIP AGROZIP Today 12:26
Pro Sprayers Дніпро Today 12:26
Field sprayer 800 liters (14 m boom, low tank) Polmark, tractor-mounted
45,000 ₴
Field sprayer 800 liters (14 m boom, low tank) Polmark, tractor-mounted
Дніпро, Україна
Necessary equipment for caring for agricultural crops - Field sprayer 800 liters (14 m boom, low tank) Polmark, tractor-mounted easily and quickly handles treatment of large sowing areas. The working boom span is 12 meters - this allows spraying plants in a continuous strip in one pass. The convenient design is mounted via a three-point hitch to tractors wit...
Today Sprayers вул. Тітова, 26
45,000 ₴
AGROZIP AGROZIP Today 12:30
Mounted Snow Plow Blade for Rototiller (vodjanka)
1,990 ₴
Mounted Snow Plow Blade for Rototiller (vodjanka)
Дніпро, Україна
Mounted snow plow blade for a rototiller is used for scraping loose snow cover up to 30 cm thick, clearing areas of various debris, leveling sandy surfaces, and evenly distributing loose coverings of gravel and crushed stone on roadside sections. The plow blade is intended for rototillers with power from 8 horsepower, is mounted on the equipment with a singl...
Today Road and snow harvesting machines вул. Тітова, 26
1,990 ₴
Call