Virax 2-25 two-bottom plough for mini tractor

11,900 ₴
Soil treatment
Yesterday 12:28
Україна
Дніпро Get directions →
вул. Тітова, 26
1 view
Published 15 hours ago by AGROZIP
11,900 ₴
In Soil treatment category
вул. Тітова, 26, Дніпро, Україна
Get directions →
1 item view

Mounted Polish two-bottom plough Virax 2-25 for a mini tractor is ideally suited for working plots of different sizes - from small land allotments to large farm fields. Made of high-quality metal, with convenient adjustment of ploughing depth, working width and moldboard positions.
This two-bottom plough 2-25 is used to prepare seedbeds for industrial and grain crops, designed for medium and deep ploughing on fields that are not contaminated with flagstone and stones. It achieves maximum productivity up to 0.6 ha/h at an operating travel speed of 12 km/h. Such figures are possible thanks to the presence of two shares (width 25 cm) with a total coverage of 50 cm.
The screw-type moldboard with which the two-bottom plough on the Wirax (Virax) 2-25 mini tractor is equipped ensures high soil cultivation efficiency - the captured soil layer is completely turned over and laid on the bottom of the furrow, saturating the soil with oxygen, maximally covering weeds and crop residues with soil.
The Polish plough Virax 2-25 is attached to a mini tractor with engine power from 20 horsepower, fastening with a rear three-point hitch system that is equipped with a special handle that adjusts the position of the shares relative to the tractor wheels. The required working depth is set by the support wheel, and the stands (50 cm) prevent the unit from clogging with vegetation. Maximum ploughing depth is 25 cm.
The triangular frame on which the Virax (Wirax) two-bottom plough is mounted has increased rigidity due to the brace in the design. The support wheel and the two bottoms are fastened to the frame with special detachable connections that allow changing the arrangement of units during adjustment. The frame, made of steel profile pipe, is designed for large working loads and copes excellently with ploughing large areas with wet heavy soils.
Advantages of the Polish two-bottom plough Virax 2-25:

Frame with increased rigidity.
Effective screw-type moldboard.
High productivity.
Convenient adjustment of working depth and share positions.

Aggregating vehicle: mini tractor
Weight, kg: 110
Power of the aggregating vehicle, hp: from 20
Working width, m: 0.5
Type of bottom: right
Distance between bottoms, mm: 650
Number of bottoms, pcs: 2-bottom
Soil working depth, mm: 250
Manufacturer: SHIP
Stand height, cm: 49

Read more

Published on 2026/10/11

Description

Mounted Polish two-bottom plough Virax 2-25 for a mini tractor is ideally suited for working plots of different sizes - from small land allotments to large farm fields. Made of high-quality metal, with convenient adjustment of ploughing depth, working width and moldboard positions.
This two-bottom plough 2-25 is used to prepare seedbeds for industrial and grain crops, designed for medium and deep ploughing on fields that are not contaminated with flagstone and stones. It achieves maximum productivity up to 0.6 ha/h at an operating travel speed of 12 km/h. Such figures are possible thanks to the presence of two shares (width 25 cm) with a total coverage of 50 cm.
The screw-type moldboard with which the two-bottom plough on the Wirax (Virax) 2-25 mini tractor is equipped ensures high soil cultivation efficiency - the captured soil layer is completely turned over and laid on the bottom of the furrow, saturating the soil with oxygen, maximally covering weeds and crop residues with soil.
The Polish plough Virax 2-25 is attached to a mini tractor with engine power from 20 horsepower, fastening with a rear three-point hitch system that is equipped with a special handle that adjusts the position of the shares relative to the tractor wheels. The required working depth is set by the support wheel, and the stands (50 cm) prevent the unit from clogging with vegetation. Maximum ploughing depth is 25 cm.
The triangular frame on which the Virax (Wirax) two-bottom plough is mounted has increased rigidity due to the brace in the design. The support wheel and the two bottoms are fastened to the frame with special detachable connections that allow changing the arrangement of units during adjustment. The frame, made of steel profile pipe, is designed for large working loads and copes excellently with ploughing large areas with wet heavy soils.
Advantages of the Polish two-bottom plough Virax 2-25:

Frame with increased rigidity.
Effective screw-type moldboard.
High productivity.
Convenient adjustment of working depth and share positions.

Aggregating vehicle: mini tractor
Weight, kg: 110
Power of the aggregating vehicle, hp: from 20
Working width, m: 0.5
Type of bottom: right
Distance between bottoms, mm: 650
Number of bottoms, pcs: 2-bottom
Soil working depth, mm: 250
Manufacturer: SHIP
Stand height, cm: 49

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 438 active listings
  • Company
  • Registered for Yesterday
  • Дніпро, Дніпропетровська область, Україна
Recently viewed
БІЛОЦЕРКІВМАЗ БІЛОЦЕРКІВМАЗ Yesterday 13:08
Pro Spare parts Біла Церква Yesterday 13:08
Rotor assembly PN 2,0.12.00T
56,760 ₴
Rotor assembly PN 2,0.12.00T
Біла Церква, Україна
Rotor assembly PN 2,0.12.00T
Yesterday Spare parts бульвар М. Грушевського, 13
56,760 ₴
AGROZIP AGROZIP Yesterday 12:30
Rake-tedder for mini tractor Sonechko, spoke 5 mm (GST5)
8,800 ₴
Rake-tedder for mini tractor Sonechko, spoke 5 mm (GST5)
Дніпро, Україна
Simple, convenient in use design - rake-tedder for mini tractor Sonechko, spoke 5 mm (GST5) is intended to accelerate drying of freshly mown vegetation (tedding) and to collect dried grassy mass, while simultaneously forming longitudinal windrows of dry hay.On the Sonechko rake (GST5) four raking wheels are installed, equipped with curved spring spokes made ...
Yesterday Collecting technique for hay, feed вул. Тітова, 26
8,800 ₴
БІЛОЦЕРКІВМАЗ БІЛОЦЕРКІВМАЗ Yesterday 13:07
Pro Other Біла Церква Yesterday 13:07
Cap AG 2.0.01
60 ₴
Cap AG 2.0.01
Біла Церква, Україна
Cap AG 2.0.01 — Spare part for AG, AGP, UDA disc harrows up to 2014 production Cap AG 2.0.01 is a reliable spare part for AG, AGP and UDA disc harrows manufactured up to 2014. This component provides proper fastening and protection of various disc harrow mechanisms, allowing the equipment to operate efficiently in different operating conditions. Made from hi...
Yesterday Other бульвар М. Грушевського, 13
60 ₴
AGROZIP AGROZIP Yesterday 12:30
Rake-tedders for minitractor "Sonechko" 4-wheel SHIP
15,200 ₴
Rake-tedders for minitractor "Sonechko" 4-wheel SHIP
Дніпро, Україна
Rake-tedders for minitractor "Sonechko" 4-wheel SHIP - high-quality functional equipment used for raking into windrows of finished dried hay or for fully turning dried plant material. They have a simple, convenient-to-use design, are excellent for collecting and tedding grassy mass on medium and large plots. They have a working width adjustable from 1.8 to 2...
Yesterday Collecting technique for hay, feed вул. Тітова, 26
15,200 ₴
ДТЗ ДТЗ Yesterday 12:49
Pro Tractors Дніпро Yesterday 12:49
Baler PRP-80/50
145,763 ₴
Baler PRP-80/50
Дніпро, Україна
Description of baler PRP-80/50 The most rational, economical and efficient way to transport and store mown hay or cereal straw is in the form of pressed rolls or bales. The baler picks up windrows of hay from natural and sown cereal grasses or straw from the field surface and compresses them into cylindrical roll-shaped bales, fastening them with tying twine...
Yesterday Tractors вул. Надії Алексєєнко, 70
145,763 ₴
БІЛОЦЕРКІВМАЗ БІЛОЦЕРКІВМАЗ Yesterday 13:08
Pro Spare parts Біла Церква Yesterday 13:08
Wheel Running Frame UD 6.1.00-2
42,649 ₴
Wheel Running Frame UD 6.1.00-2
Біла Церква, Україна
The wheel running frame is used on all types of UDA disc harrows
Yesterday Spare parts бульвар М. Грушевського, 13
42,649 ₴
Call