Tractor JMT 404SNU
IRON COMPANION FOR THE STRONG-SPIRITED: TRACTOR JMT 404SNU THAT WILL NOT BETRAY You know the feeling when the work is burning, the land is waiting, and the equipment starts acting up? At that moment you need not just a piece of metal but a reliable shoulder to lean on. Instead of fancy add-ons you want something simple and real — like the JMT 404SNU tractor. For those who are not afraid to get their hands dirty, it is always ready to rush into the field in half a turn. ENGINE Reliable latches on the sides of the hood provide quick access to the 3-cylinder diesel engine model KM490BT, which with a displacement of 2545 cm3 produces 40 hp. Next to it is a 30-liter fuel tank: it is protected here from precipitation and accidental impacts, and it is convenient to refuel without opening the hood through a special flap. A time-tested, low-maintenance contact-oil air filter takes care of air cleanliness in the engine. TRANSMISSION AND CHASSIS An additional 48 kg of front ballast increases the total weight of the machine to 1530 kg. The machine develops a tractive force of 9.2 kN and has an agricultural clearance of 370 mm, and the track of the front and rear axles can be easily adjusted for different crops. The gearbox (4+1)x2x2 provides a wide choice of speeds for any agricultural tasks. And if slipping occurs, you can engage the front drive, and in more difficult situations — lock the differential. HITCH SYSTEM The lifting capacity of the rear three-point hitch is 650 kg. Confidence in its strength is added by lower links with stiffening ribs, and the top link is conveniently fixed on a hook. For working with mounted equipment, two pairs of additional hydraulic outlets with quick-release couplings controlled from the main distributor are provided. And the lower towing pivot allows using a trailer simultaneously with the power take-off shaft (630 rpm). COMFORT AND ELECTRICAL EQUIPMENT A convenient ribbed step is installed on the left, and the handles on the fenders help to climb up and hold on during travel. We settle into the seat, adjust the position for ourselves and, if necessary, lower the armrests. In front of you is a clear analog panel with the main indicators, and the steering wheel with a spinner knob makes maneuvering easier. The on-board network is powered by a 350 W generator, and an additional rear LED work light helps in the dark hours. In the end, it all comes down to simple peace of mind: when the JMT 404SNU tractor is at hand, any work is accomplished quickly and the farm runs like clockwork. This is proven classic without unnecessary electronic gadgets — everything is simple and reliable, with no overpayments or headaches.
Engine model: KM490BT
Engine type: Diesel, 4-stroke, with direct injection
Number and arrangement of cylinders: 3, vertical
Engine displacement, cm³: 2545
Turbocharging: None
Rated engine power, hp (kW): 40 (29.4)
Air filter: Contact-oil: high air intake with transparent cyclone, oil bath, metal mesh
Intake manifold air heating: Electric torch-type glow plug
Fuel tank capacity, l: 30
Transmission type: Mechanical gear
Gear shifting formula: (4+1)x2x2
Main gearbox: 4 speeds
Additional reduction gearboxes: 2+2 gears
Separate reversing gearbox: None
Clutch: Dry, 2-stage, constantly engaged type
Steering: Hydrostatic with separate pump and separate oil tank
Wheel formula: 4x4
Brakes: On rear wheels, drum, mechanical actuation, split pedals
Theoretical forward speed, km/h: 1.75-26.4
Theoretical reverse speed, km/h: 2.28-11.02
Rear axle differential lock: Yes
Minimum turning radius without brakes, m: 4.2
Minimum turning radius with brakes, m: 3.4
Rated drawbar pull, kN: 9.2
Overall dimensions (LxWxH), mm: 3300×1520×1920
Operating weight, kg: 1530
Front tire size: 6.50-16
Rear tire size: 11.20-24
Wheelbase, mm: 1910
Front wheel track, mm: 1170, 1250, 1370
Rear wheel track, mm: 1230, 1310, 1370
Agrotechnical clearance, mm: 370
Ground clearance, mm: 300
Additional front/rear weights, (pcs × kg): 4×12 / None
Rear hitch: Universal 3-point with hydraulic lift and forced lowering
Hydraulic lift drive: Built-in hydraulic cylinder, separate gear hydraulic pump
Maximum hitch lifting capacity, kg: 650
Towing device: Removable pendulum hook with vertical non-rotating pivot
PTO speed, rpm: 630
Hydraulic system oil tank capacity, l: 9
Published on 2026/10/11
IRON COMPANION FOR THE STRONG-SPIRITED: TRACTOR JMT 404SNU THAT WILL NOT BETRAY You know the feeling when the work is burning, the land is waiting, and the equipment starts acting up? At that moment you need not just a piece of metal but a reliable shoulder to lean on. Instead of fancy add-ons you want something simple and real — like the JMT 404SNU tractor. For those who are not afraid to get their hands dirty, it is always ready to rush into the field in half a turn. ENGINE Reliable latches on the sides of the hood provide quick access to the 3-cylinder diesel engine model KM490BT, which with a displacement of 2545 cm3 produces 40 hp. Next to it is a 30-liter fuel tank: it is protected here from precipitation and accidental impacts, and it is convenient to refuel without opening the hood through a special flap. A time-tested, low-maintenance contact-oil air filter takes care of air cleanliness in the engine. TRANSMISSION AND CHASSIS An additional 48 kg of front ballast increases the total weight of the machine to 1530 kg. The machine develops a tractive force of 9.2 kN and has an agricultural clearance of 370 mm, and the track of the front and rear axles can be easily adjusted for different crops. The gearbox (4+1)x2x2 provides a wide choice of speeds for any agricultural tasks. And if slipping occurs, you can engage the front drive, and in more difficult situations — lock the differential. HITCH SYSTEM The lifting capacity of the rear three-point hitch is 650 kg. Confidence in its strength is added by lower links with stiffening ribs, and the top link is conveniently fixed on a hook. For working with mounted equipment, two pairs of additional hydraulic outlets with quick-release couplings controlled from the main distributor are provided. And the lower towing pivot allows using a trailer simultaneously with the power take-off shaft (630 rpm). COMFORT AND ELECTRICAL EQUIPMENT A convenient ribbed step is installed on the left, and the handles on the fenders help to climb up and hold on during travel. We settle into the seat, adjust the position for ourselves and, if necessary, lower the armrests. In front of you is a clear analog panel with the main indicators, and the steering wheel with a spinner knob makes maneuvering easier. The on-board network is powered by a 350 W generator, and an additional rear LED work light helps in the dark hours. In the end, it all comes down to simple peace of mind: when the JMT 404SNU tractor is at hand, any work is accomplished quickly and the farm runs like clockwork. This is proven classic without unnecessary electronic gadgets — everything is simple and reliable, with no overpayments or headaches.
Engine model: KM490BT
Engine type: Diesel, 4-stroke, with direct injection
Number and arrangement of cylinders: 3, vertical
Engine displacement, cm³: 2545
Turbocharging: None
Rated engine power, hp (kW): 40 (29.4)
Air filter: Contact-oil: high air intake with transparent cyclone, oil bath, metal mesh
Intake manifold air heating: Electric torch-type glow plug
Fuel tank capacity, l: 30
Transmission type: Mechanical gear
Gear shifting formula: (4+1)x2x2
Main gearbox: 4 speeds
Additional reduction gearboxes: 2+2 gears
Separate reversing gearbox: None
Clutch: Dry, 2-stage, constantly engaged type
Steering: Hydrostatic with separate pump and separate oil tank
Wheel formula: 4x4
Brakes: On rear wheels, drum, mechanical actuation, split pedals
Theoretical forward speed, km/h: 1.75-26.4
Theoretical reverse speed, km/h: 2.28-11.02
Rear axle differential lock: Yes
Minimum turning radius without brakes, m: 4.2
Minimum turning radius with brakes, m: 3.4
Rated drawbar pull, kN: 9.2
Overall dimensions (LxWxH), mm: 3300×1520×1920
Operating weight, kg: 1530
Front tire size: 6.50-16
Rear tire size: 11.20-24
Wheelbase, mm: 1910
Front wheel track, mm: 1170, 1250, 1370
Rear wheel track, mm: 1230, 1310, 1370
Agrotechnical clearance, mm: 370
Ground clearance, mm: 300
Additional front/rear weights, (pcs × kg): 4×12 / None
Rear hitch: Universal 3-point with hydraulic lift and forced lowering
Hydraulic lift drive: Built-in hydraulic cylinder, separate gear hydraulic pump
Maximum hitch lifting capacity, kg: 650
Towing device: Removable pendulum hook with vertical non-rotating pivot
PTO speed, rpm: 630
Hydraulic system oil tank capacity, l: 9
Contact the seller
User is offline
- 309 active listings
- Company
- Registered for Yesterday
- Дніпро, Дніпропетровська область, Україна