Report

1 images

Flat solar collector VIESSMANN VITOSOL 200-FM type SV2F

49,378 ₴

Other

Sunday 11:55

Україна

Київ Get directions →

вул. Стеценка, 14/44

20 views

Published 4 days ago by Solar-Tech

49,378 ₴

In Other category

вул. Стеценка, 14/44, Київ, Україна

Get directions →

20 item views

Vitosol 200-FM type SV2F - powerful flat collector with ThermProtect absorber-layer connection, for vertical installation

The powerful flat collector Vitosol 200-FM, supplied in a silver-coloured frame, will be the ideal addition to any heating system. With an absorber area of 2.3 m² these collectors suit consumers with various energy needs.

On average over a year they cover up to 60 percent of the energy required for domestic hot water and provide support for heating. In combination with a condensing boiler, thanks to the free energy of the sun, you can save more than a third of the energy used for heating and domestic hot water over the year.

Advantages:

No overheating of the surface or steam formation at low heat output

High percentage coverage of heating and domestic hot water needs by solar energy

Universal design for mounting on pitched or flat roofs, integration into the roof or installation on the facade

Powerful flat collector with ThermProtect absorber-layer connection

Horizontal and vertical installation possible

The powerful flat collectors Vitosol 200-FM will be the ideal addition to any heating system. With an absorber area of 2.3 m² they are suitable for consumers with any level of demand.

Over the year they cover up to 60 percent of the energy required for domestic hot water and contribute to heating. When operating together with a condensing boiler, thanks to the free energy of the sun, these collectors allow saving even one third of the energy required for heating and producing hot water over the year.

ThermProtect protects against overheating

The "smart" absorber layer protects the collectors from overheating. The ThermProtect technology, patented by Viessmann, when a certain temperature level is reached, blocks the collector from taking up further energy.

ThermProtect allows the Vitosol 100-FM to achieve higher performance compared to conventional collectors. When the limit temperature is exceeded the crystalline structure of the absorbing layer changes, its heat emission increases many times, and the collector's output decreases. As a result the so-called stagnation temperature becomes significantly lower and steam does not form in the solar circuit.

As the collector temperature falls, the crystalline structure returns to its original state. The absorber again absorbs more than 95 percent of the received solar energy, converting it into useful heat. Only a small portion - about five percent - is reflected back. Such a change of the crystalline structure can be repeated an unlimited number of times - the working qualities of the collector will not deteriorate.

Always tight and with high-quality thermal insulation

The aluminium frame, bent at the edges, and the seamless edging of the collector itself ensure long-lasting tightness and high structural stability. The collector's back wall is resistant to impact and corrosion. High-quality thermal insulation significantly reduces heat losses, especially in cold seasons.

Easy installation

The collectors are very easy to install. Built-in supply and return pipes allow reliable installation of large areas made of many units, using a flexible plug connector made of stainless steel. Up to twelve solar collectors can be easily connected to each other.

Flat collectors are universal for roof mounting, for integration into the roof surface, or for installation in a raised position on flat roofs. Viessmann's quick mounting system consists of components that withstand static loads and are corrosion-protected, made of stainless steel and aluminium.

Integration into the roof

The Vitosol 200-FM collector, type SV2G (vertical) or SH2G (horizontal), can harmoniously blend with the roof when built into the roof practically to full depth.

Collector frame with a special profile for connection to the roof frame

Technical characteristics of the flat collector VIESSMANN VITOSOL 200-FM type SV2F:

Collector area, (m² )

2,33

Absorber area, (m²)

2,31

Optical, (efficiency %)

Dimensions: WidthXHeightXDepth, (mm)

1056х2380х90

Mass without fluid, (kg)

Fluid/heat carrier volume, (l)

1,83

Permissible operating pressure, (bar)

Max. stagnation temperature, (°C)

145

Connection, (Ø mm)

Number of connections

Frame material

aluminium

Absorber material

copper

Absorber connection

laser welding

Cover material

tempered glass

Country of manufacture

Germany

Published on 2026/10/11

Description