Power tiller Kentavr MB2070B (wheels 4.00-10)
Description of the Kentavr MB2070B power tiller (wheels 4.00-10) MB 2070B (4.00-10) is the base model of the power tiller line with direct drive, one of the most popular "Kentavr" models. The direct drive to the gearbox is executed through a multi-plate clutch, has lower power losses than a belt drive, therefore it allows full use of the engine's potential, improves fuel efficiency and increases the tiller's effectiveness. The clutch is new and safe, normally open type. The center of gravity is located lower than in tillers with belt drive, which improves stability and reduces vibrations during rotary tiller operation. There is no need to constantly monitor the condition and tension of the drive belts. The air filter with a remote air intake on the handlebar significantly extends the engine's service life. The reverse lever has a lock to prevent accidental engagement. The tiller is equipped with transport wheels size: 4.00-10, which provide greater tractive effort.
Engine model: 170F
Fuel type: Gasoline
Engine power, hp: 7.0
Engine displacement, cm³: 208
Rated speed, rpm: 3000
Rated fuel consumption, g/kW·h: ≤374
Fuel tank capacity, L: 6.0
Engine starting system: Manual starter
Air filter: With remote air intake on the handlebar
Battery type, capacity A·h: -
Engine crankcase volume, L: 0.6
Type of oil in engine crankcase: TM "DTZ" TURBO SYNT 10W-40 API CF-4/SG
Oil level sensor: Yes
Engine cooling system: Air cooling
Cooling system capacity, L: -
Type of coolant: -
Transmission drive type: Direct, via clutch
Clutch type: Normally open multi-plate in an oil bath
Drive belt type: -
Socket for connecting active implements: -
Gearbox type: Gear
Number of gears: 2/1
Method of engaging reverse: Handle on the handlebar
Rotary tiller drive: Direct with bevel reducer
Power take-off shaft: Rear longitudinal with keyway Ø18, L=24
Oil volume in gearbox crankcase, L: 2.6
Type of oil in gearbox crankcase: TM "DTZ" TAD-17i API GL-46
Transport wheels: 4.00-10
Wheel track, mm: 600
Rated travel speed on wheels forward/reverse, km/h: 8.3; 11.6 / 6.1
Steering type and adjuster: Quick adjustment for height and direction
Hitch type: Power tiller type
Method of installing the rotary tiller: In place of transport wheels
Rated rotor speed of the rotary tiller, rpm: 93; 130 / 68
Number of rotary tiller sections, pcs: 8=(2+1+1)×2
Size/quantity/type of rotary tiller blades: (5.5×235) × 32 pcs.
Rotary tiller working width, mm: 620, 880, 1140
Rotor diameter of rotary tiller, mm: 360
Cultivation depth, mm: Up to 200
ADDITIONAL EQUIPMENT: -
Published on 2026/10/11
Description of the Kentavr MB2070B power tiller (wheels 4.00-10) MB 2070B (4.00-10) is the base model of the power tiller line with direct drive, one of the most popular "Kentavr" models. The direct drive to the gearbox is executed through a multi-plate clutch, has lower power losses than a belt drive, therefore it allows full use of the engine's potential, improves fuel efficiency and increases the tiller's effectiveness. The clutch is new and safe, normally open type. The center of gravity is located lower than in tillers with belt drive, which improves stability and reduces vibrations during rotary tiller operation. There is no need to constantly monitor the condition and tension of the drive belts. The air filter with a remote air intake on the handlebar significantly extends the engine's service life. The reverse lever has a lock to prevent accidental engagement. The tiller is equipped with transport wheels size: 4.00-10, which provide greater tractive effort.
Engine model: 170F
Fuel type: Gasoline
Engine power, hp: 7.0
Engine displacement, cm³: 208
Rated speed, rpm: 3000
Rated fuel consumption, g/kW·h: ≤374
Fuel tank capacity, L: 6.0
Engine starting system: Manual starter
Air filter: With remote air intake on the handlebar
Battery type, capacity A·h: -
Engine crankcase volume, L: 0.6
Type of oil in engine crankcase: TM "DTZ" TURBO SYNT 10W-40 API CF-4/SG
Oil level sensor: Yes
Engine cooling system: Air cooling
Cooling system capacity, L: -
Type of coolant: -
Transmission drive type: Direct, via clutch
Clutch type: Normally open multi-plate in an oil bath
Drive belt type: -
Socket for connecting active implements: -
Gearbox type: Gear
Number of gears: 2/1
Method of engaging reverse: Handle on the handlebar
Rotary tiller drive: Direct with bevel reducer
Power take-off shaft: Rear longitudinal with keyway Ø18, L=24
Oil volume in gearbox crankcase, L: 2.6
Type of oil in gearbox crankcase: TM "DTZ" TAD-17i API GL-46
Transport wheels: 4.00-10
Wheel track, mm: 600
Rated travel speed on wheels forward/reverse, km/h: 8.3; 11.6 / 6.1
Steering type and adjuster: Quick adjustment for height and direction
Hitch type: Power tiller type
Method of installing the rotary tiller: In place of transport wheels
Rated rotor speed of the rotary tiller, rpm: 93; 130 / 68
Number of rotary tiller sections, pcs: 8=(2+1+1)×2
Size/quantity/type of rotary tiller blades: (5.5×235) × 32 pcs.
Rotary tiller working width, mm: 620, 880, 1140
Rotor diameter of rotary tiller, mm: 360
Cultivation depth, mm: Up to 200
ADDITIONAL EQUIPMENT: -
Contact the seller
User is offline
- 171 active listings
- Company
- Registered for Yesterday
- Дніпро, Дніпропетровська область, Україна