Motor-cultivator DTZ 570BN - K (wheels 4.00-10)

24,444 ₴
Cultivators
Yesterday 12:50
Україна
Дніпро Get directions →
вул. Надії Алексєєнко, 70
10 views
Published 14 hours ago by ДТЗ
24,444 ₴
In Cultivators category
вул. Надії Алексєєнко, 70, Дніпро, Україна
Get directions →
10 item views

Description of the motor-cultivator DTZ 570BN - K (wheels 4.00-10) The motor-cultivator DTZ 570BN-K is equipped with a gasoline engine with a power of 7 hp, which is quite enough to perform agricultural work. DTZ-K motor-cultivators are equipped with a new type of gearbox. Main advantages of the new gearbox: a separate reverse/gear back in the gearbox (easier to control which gear is engaged); reduced rotational speed of 1st gear (better and more precise work with mounted equipment); a detachable rear housing cover; reinforced mounting for active mounted equipment; a visual sensor to monitor the oil level in the gearbox. Direct drive has lower power losses than belt drive, and therefore allows the engine potential to be used fully, improves fuel economy and increases the efficiency of the motor-cultivator. The DTZ 570BN-K is supplied with 4.00-10 wheels and an 8-section rotary tiller with a maximum working width of 1140 mm. Plant protection discs are also included in the set. In addition, the center of gravity of the DTZ 570BN-K is located slightly lower than in belt-driven motor-cultivators, which improves stability and reduces vibrations during tiller operation. There is no need to constantly monitor the condition and tension of drive belts. And thanks to the normally open type clutch and the choice of reverse gear as a separate gear in the gearbox, the safety of operation remains at the same high level as in a belt-driven motor-cultivator. All DTZ motor-cultivators come with a 2-year warranty.

Engine model: 170F
Fuel type: Gasoline
Engine power, hp: 7.0
Engine displacement, cm³: 208
Rated speed, rpm: 3000
Rated fuel consumption, g/kW·h: ≤374
Fuel tank capacity, l: 6.0
Engine starting system: Manual starter
Battery: type, capacity, Ah: None
Air filter: With remote air intake on the handlebar
Engine crankcase capacity, l: 0.6
Type of oil in engine crankcase: TM "DTZ" TURBO SYNT 10W-40 API CF-4/SG
Oil level sensor: Yes
Engine cooling system: Air cooling
Cooling system capacity, l: -
Type of coolant: -
Transmission drive type: Direct, through clutch
Clutch type: Normally open multi-plate in oil bath
Drive belts type: None
Connector for active mounted equipment: None
Gearbox type: Gear
Number of gears forward/back: 3/1
Method of engaging reverse: By selecting the reverse gear in the main gearbox
Tiller drive: Direct with bevel gearbox
Power take-off shaft: Rear longitudinal, keyed Ø18, L=24
Transmission oil capacity, l: 2.6
Type of oil in transmission crankcase: TM "DTZ" TAD-17 and API GL
Transport wheels: 4.00-10 with overrunning unlockers
Wheel track, mm: 600
Rated travel speed on wheels forward/back, km/h: 1; 4.6; 7.7/1.4
Handlebar adjustment type: Rapid adjustment by height and direction
Type of hitch device: Motor-cultivator type
Method of installing the rotary tiller: Instead of transport wheels
Rated rotary tiller speed, rpm: 16; 83; 140
Number of rotary tiller sections, pcs.: 8=(2+1+1)×2
Size / quantity / type of rotary tiller blades: (5.5x235) × 32 pcs.
Rotary tiller working width, mm: 620, 880, 1140
Rotor diameter of rotary tiller, mm: 360
Cultivation depth, mm: Up to 200
Electrical equipment: None

Read more

Published on 2026/10/11

Description

Description of the motor-cultivator DTZ 570BN - K (wheels 4.00-10) The motor-cultivator DTZ 570BN-K is equipped with a gasoline engine with a power of 7 hp, which is quite enough to perform agricultural work. DTZ-K motor-cultivators are equipped with a new type of gearbox. Main advantages of the new gearbox: a separate reverse/gear back in the gearbox (easier to control which gear is engaged); reduced rotational speed of 1st gear (better and more precise work with mounted equipment); a detachable rear housing cover; reinforced mounting for active mounted equipment; a visual sensor to monitor the oil level in the gearbox. Direct drive has lower power losses than belt drive, and therefore allows the engine potential to be used fully, improves fuel economy and increases the efficiency of the motor-cultivator. The DTZ 570BN-K is supplied with 4.00-10 wheels and an 8-section rotary tiller with a maximum working width of 1140 mm. Plant protection discs are also included in the set. In addition, the center of gravity of the DTZ 570BN-K is located slightly lower than in belt-driven motor-cultivators, which improves stability and reduces vibrations during tiller operation. There is no need to constantly monitor the condition and tension of drive belts. And thanks to the normally open type clutch and the choice of reverse gear as a separate gear in the gearbox, the safety of operation remains at the same high level as in a belt-driven motor-cultivator. All DTZ motor-cultivators come with a 2-year warranty.

Engine model: 170F
Fuel type: Gasoline
Engine power, hp: 7.0
Engine displacement, cm³: 208
Rated speed, rpm: 3000
Rated fuel consumption, g/kW·h: ≤374
Fuel tank capacity, l: 6.0
Engine starting system: Manual starter
Battery: type, capacity, Ah: None
Air filter: With remote air intake on the handlebar
Engine crankcase capacity, l: 0.6
Type of oil in engine crankcase: TM "DTZ" TURBO SYNT 10W-40 API CF-4/SG
Oil level sensor: Yes
Engine cooling system: Air cooling
Cooling system capacity, l: -
Type of coolant: -
Transmission drive type: Direct, through clutch
Clutch type: Normally open multi-plate in oil bath
Drive belts type: None
Connector for active mounted equipment: None
Gearbox type: Gear
Number of gears forward/back: 3/1
Method of engaging reverse: By selecting the reverse gear in the main gearbox
Tiller drive: Direct with bevel gearbox
Power take-off shaft: Rear longitudinal, keyed Ø18, L=24
Transmission oil capacity, l: 2.6
Type of oil in transmission crankcase: TM "DTZ" TAD-17 and API GL
Transport wheels: 4.00-10 with overrunning unlockers
Wheel track, mm: 600
Rated travel speed on wheels forward/back, km/h: 1; 4.6; 7.7/1.4
Handlebar adjustment type: Rapid adjustment by height and direction
Type of hitch device: Motor-cultivator type
Method of installing the rotary tiller: Instead of transport wheels
Rated rotary tiller speed, rpm: 16; 83; 140
Number of rotary tiller sections, pcs.: 8=(2+1+1)×2
Size / quantity / type of rotary tiller blades: (5.5x235) × 32 pcs.
Rotary tiller working width, mm: 620, 880, 1140
Rotor diameter of rotary tiller, mm: 360
Cultivation depth, mm: Up to 200
Electrical equipment: None

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 309 active listings
  • Company
  • Registered for Yesterday
  • Дніпро, Дніпропетровська область, Україна
Recently viewed
ДТЗ ДТЗ Yesterday 12:56
Pro Soil treatment Дніпро Yesterday 12:56
Soil tiller FN-1.25
35,629 ₴
Soil tiller FN-1.25
Дніпро, Україна
Description of rotary soil tiller FN-1.25. Rotary soil tillers are used for final pre-sowing soil cultivation in a single working pass, eliminating preliminary plowing and harrowing. At the same time, active crushing and mixing of the topsoil layer occurs, weeds are destroyed, crop residue and fertilizers are incorporated, the surface is leveled, and optimal...
Yesterday Soil treatment вул. Надії Алексєєнко, 70
35,629 ₴
Kentavr Kentavr Yesterday 12:35
Pro Soil treatment Дніпро Yesterday 12:35
Adjustable D370 disc ridger
2,630 ₴
Adjustable D370 disc ridger
Дніпро, Україна
Description of adjustable D370 disc ridger The universal adjustable disc ridger can be attached to walk-behind tractors, power cultivators and mini-tractors. The ridger can be adjusted for working width thanks to movable locking fasteners; working depth and attack angles are additionally adjustable. Durability and reliability are enhanced by 2 bearings insta...
Yesterday Soil treatment вул. Надії Алексєєнко, 70
2,630 ₴
AGROZIP AGROZIP Yesterday 12:30
3-wheel rake-tedder for mini tractor «Sonechko»
11,300 ₴
3-wheel rake-tedder for mini tractor «Sonechko»
Дніпро, Україна
Rake-tedders for the mini tractor «Sonechko» 3-wheel are used for raking mown dried grass into windrows or tedding plant mass that has not yet fully dried. The implement features a simple convenient design that allows haymaking to be carried out with high efficiency on medium and large areas, achieving a maximum productivity of 1.5 ha/h.The 3-wheel rakes att...
Yesterday Collecting technique for hay, feed вул. Тітова, 26
11,300 ₴
AGROZIP AGROZIP Yesterday 12:30
Rake-tedders for minitractor "Sonechko" 4-wheel SHIP
15,200 ₴
Rake-tedders for minitractor "Sonechko" 4-wheel SHIP
Дніпро, Україна
Rake-tedders for minitractor "Sonechko" 4-wheel SHIP - high-quality functional equipment used for raking into windrows of finished dried hay or for fully turning dried plant material. They have a simple, convenient-to-use design, are excellent for collecting and tedding grassy mass on medium and large plots. They have a working width adjustable from 1.8 to 2...
Yesterday Collecting technique for hay, feed вул. Тітова, 26
15,200 ₴
AGROZIP AGROZIP Yesterday 12:27
Pro Soil treatment Дніпро Yesterday 12:27
Two-body plow PL7 for walk-behind tractor
5,630 ₴
Two-body plow PL7 for walk-behind tractor
Дніпро, Україна
Specialized equipment designed for heavy workloads - the two-body plow PL7 for a walk-behind tractor is equipped with all the main functions for performing effective tillage on plots cleared of various mechanical impurities, with light and heavy soils. The adjustable triangular steel frame is equipped with special turnbuckles intended to control transverse a...
Yesterday Soil treatment вул. Тітова, 26
5,630 ₴
Call