Motor-cultivator DTZ 513BN - K (wheels 4.00-10)

29,856 ₴
Cultivators
Yesterday 12:52
Україна
Дніпро Get directions →
вул. Надії Алексєєнко, 70
7 views
Published 14 hours ago by ДТЗ
29,856 ₴
In Cultivators category
вул. Надії Алексєєнко, 70, Дніпро, Україна
Get directions →
7 item views

Description of the motor-cultivator DTZ 513BN - K (wheels 4.00-10) The motor-cultivator DTZ 513BN-K is a powerful gasoline motor-cultivator among the "DTZ" models. This machine is equipped with a reliable 4-stroke gasoline engine with a power of 13 hp, which allows performing a wide range of tasks that the owner may face. DTZ-K motor-cultivators are equipped with a new-type gearbox. Main advantages of the new gearbox: a separate reverse gear in the gearbox (easier to control which gear is engaged); reduced rotation speed of the 1st gear (better and more precise work with mounted equipment); detachable rear housing cover; reinforced mounting for active mounted equipment; visual oil level sensor for the gearbox. The increase in engine power made it possible to equip the motor-cultivator with a wider rotary tiller with a maximum working width of 1400 mm. This is the largest tiller working width among the "DTZ" motor-cultivators. The motor-cultivator has large pneumatic transport wheels: 4.00-10 with a "herringbone" type tread. Therefore this motor-cultivator is suitable not only for use in private farms, but also for professional use on vegetable, garden and greenhouse complexes, as well as as a transport vehicle for carrying loads on a special trailer. All "DTZ" motor-cultivators come with a 2-year warranty.

Engine model: 188F
Fuel type: Gasoline
Engine power, hp: 13
Engine displacement, cm³: 389
Rated speed, rpm: 3000
Rated fuel consumption, g/kW∙h: 366
Fuel tank capacity, L: 6.0
Engine start system: Manual starter
Battery: type, capacity, Ah: None
Air filter: With remote air intake on the handlebar
Engine crankcase capacity, L: 1.2
Type of oil in engine crankcase: TM "DTZ" TURBO SYNT 10W-40 API CF-4/SG
Oil level sensor: Yes
Engine cooling system: Air cooling
Cooling system capacity, L: -
Type of coolant: -
Transmission drive type: Direct gear-driven
Clutch type: Normally disengaged multi-disc in oil bath
Drive belt type: None
Port for connecting active mounted equipment: None
Gearbox type: Gear
Number of gears forward/reverse: 3/1
Method of engaging reverse: By selecting the reverse gear in the main gearbox
Tiller drive: Direct with bevel gearbox
Power take-off shaft: Rear longitudinal with key Ø18, L=24
Gearbox oil capacity, L: 2.6
Type of oil in gearbox: TM "DTZ" TAD-17 and API GL-46
Transport wheels: 4.00-10 with overrunning unlockers
Wheel track, mm: 600
Rated travel speed on wheels forward/reverse, km/h: 0.9; 4.6; 7.7/1.4
Handlebar adjustment type: Quick adjustment for height and direction
Type of towing device: Motor-cultivator type
Method of mounting the rotary tiller: In place of transport wheels
Rated rotation speed of the rotary tiller, rpm: 16; 83; 140
Number of rotary tiller sections, pcs.: 10=(3+1+1)x2
Size / quantity / type of rotary tiller blades: 5.5 mm × 235 mm/40 pcs.
Working width of the rotary tiller, mm: 880, 1140, 1400
Rotor diameter of the rotary tiller, mm: 360
Cultivation depth, mm: Up to 200
Electrical equipment: None

Read more

Published on 2026/10/11

Description

Description of the motor-cultivator DTZ 513BN - K (wheels 4.00-10) The motor-cultivator DTZ 513BN-K is a powerful gasoline motor-cultivator among the "DTZ" models. This machine is equipped with a reliable 4-stroke gasoline engine with a power of 13 hp, which allows performing a wide range of tasks that the owner may face. DTZ-K motor-cultivators are equipped with a new-type gearbox. Main advantages of the new gearbox: a separate reverse gear in the gearbox (easier to control which gear is engaged); reduced rotation speed of the 1st gear (better and more precise work with mounted equipment); detachable rear housing cover; reinforced mounting for active mounted equipment; visual oil level sensor for the gearbox. The increase in engine power made it possible to equip the motor-cultivator with a wider rotary tiller with a maximum working width of 1400 mm. This is the largest tiller working width among the "DTZ" motor-cultivators. The motor-cultivator has large pneumatic transport wheels: 4.00-10 with a "herringbone" type tread. Therefore this motor-cultivator is suitable not only for use in private farms, but also for professional use on vegetable, garden and greenhouse complexes, as well as as a transport vehicle for carrying loads on a special trailer. All "DTZ" motor-cultivators come with a 2-year warranty.

Engine model: 188F
Fuel type: Gasoline
Engine power, hp: 13
Engine displacement, cm³: 389
Rated speed, rpm: 3000
Rated fuel consumption, g/kW∙h: 366
Fuel tank capacity, L: 6.0
Engine start system: Manual starter
Battery: type, capacity, Ah: None
Air filter: With remote air intake on the handlebar
Engine crankcase capacity, L: 1.2
Type of oil in engine crankcase: TM "DTZ" TURBO SYNT 10W-40 API CF-4/SG
Oil level sensor: Yes
Engine cooling system: Air cooling
Cooling system capacity, L: -
Type of coolant: -
Transmission drive type: Direct gear-driven
Clutch type: Normally disengaged multi-disc in oil bath
Drive belt type: None
Port for connecting active mounted equipment: None
Gearbox type: Gear
Number of gears forward/reverse: 3/1
Method of engaging reverse: By selecting the reverse gear in the main gearbox
Tiller drive: Direct with bevel gearbox
Power take-off shaft: Rear longitudinal with key Ø18, L=24
Gearbox oil capacity, L: 2.6
Type of oil in gearbox: TM "DTZ" TAD-17 and API GL-46
Transport wheels: 4.00-10 with overrunning unlockers
Wheel track, mm: 600
Rated travel speed on wheels forward/reverse, km/h: 0.9; 4.6; 7.7/1.4
Handlebar adjustment type: Quick adjustment for height and direction
Type of towing device: Motor-cultivator type
Method of mounting the rotary tiller: In place of transport wheels
Rated rotation speed of the rotary tiller, rpm: 16; 83; 140
Number of rotary tiller sections, pcs.: 10=(3+1+1)x2
Size / quantity / type of rotary tiller blades: 5.5 mm × 235 mm/40 pcs.
Working width of the rotary tiller, mm: 880, 1140, 1400
Rotor diameter of the rotary tiller, mm: 360
Cultivation depth, mm: Up to 200
Electrical equipment: None

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 309 active listings
  • Company
  • Registered for Yesterday
  • Дніпро, Дніпропетровська область, Україна
Recently viewed
БІЛОЦЕРКІВМАЗ БІЛОЦЕРКІВМАЗ Yesterday 13:09
KPF 05.000 Picker
49,000 ₴
KPF 05.000 Picker
Біла Церква, Україна
The forage harvester picker KPF from “BILOTSERKIVMAZ” includes a shaft with discs in which five tines with spring teeth are mounted on bearings. Crankshafts move along a guide track and feed plant material to the auger. The auger is mounted on spring supports and, under the action of plant material, can move upward along the guides. Feeding blades can be rem...
Yesterday Livestock equipment бульвар М. Грушевського, 13
49,000 ₴
Kentavr Kentavr Yesterday 12:35
Pro Soil treatment Дніпро Yesterday 12:35
Mototractor Plow PNM-1.20
4,105 ₴
Mototractor Plow PNM-1.20
Дніпро, Україна
Description of mototractor plow PNM-1.20 The mototractor plow PNM-1.20 will help you perform plowing by attaching it to a mototractor or to a heavy walk-behind tractor. This device is designed for plowing, soil fragmentation, and turning layers of soil. With it you will enrich your soil with oxygen, which will significantly increase the yield of your plot; y...
Yesterday Soil treatment вул. Надії Алексєєнко, 70
4,105 ₴
БІЛОЦЕРКІВМАЗ БІЛОЦЕРКІВМАЗ Yesterday 13:08
Pro Spare parts Біла Церква Yesterday 13:08
Rotor assembly KRP 06.00.00T
44,253 ₴
Rotor assembly KRP 06.00.00T
Біла Церква, Україна
Rotor assembly KRP 06.00.00T
Yesterday Spare parts бульвар М. Грушевського, 13
44,253 ₴
AGROZIP AGROZIP Yesterday 12:30
Rake-tedders for minitractor "Sonechko" 4-wheel SHIP
15,200 ₴
Rake-tedders for minitractor "Sonechko" 4-wheel SHIP
Дніпро, Україна
Rake-tedders for minitractor "Sonechko" 4-wheel SHIP - high-quality functional equipment used for raking into windrows of finished dried hay or for fully turning dried plant material. They have a simple, convenient-to-use design, are excellent for collecting and tedding grassy mass on medium and large plots. They have a working width adjustable from 1.8 to 2...
Yesterday Collecting technique for hay, feed вул. Тітова, 26
15,200 ₴
AGROZIP AGROZIP Yesterday 12:27
Pro Soil treatment Дніпро Yesterday 12:27
Two-body plow PL7 for walk-behind tractor
5,630 ₴
Two-body plow PL7 for walk-behind tractor
Дніпро, Україна
Specialized equipment designed for heavy workloads - the two-body plow PL7 for a walk-behind tractor is equipped with all the main functions for performing effective tillage on plots cleared of various mechanical impurities, with light and heavy soils. The adjustable triangular steel frame is equipped with special turnbuckles intended to control transverse a...
Yesterday Soil treatment вул. Тітова, 26
5,630 ₴
Call