Three-row garlic planter ChS21 for motor-tractor, garlic and onion seeder
Garlic planter 3-row ChS21 (2 sets of cups - 34 mm and 24.5 mm) is designed for coupling with motor-tractors. The design of the hitch unit of the garlic planter is calculated for single-point attachment of the motor-block type and the use of a hydraulic lift system. The garlic planter is intended for use with a motor-tractor with power from 12 hp. When using the garlic planter with a motor-tractor more powerful than 24 hp, a limited warranty is provided. In such cases it is necessary to work with caution, monitoring the load on the units of the garlic seeder.
Purpose and conditions of use of the garlic planter ChS21
The mounted garlic seeder is intended for planting garlic cloves, single-clove garlic and onion sets on pre-tilled and prepared soils, with soil moisture not more than 30%. For planting it is necessary to use calibrated planting material sized 15-35 mm.
Design features of the agrotechnics for growing garlic ChS21
The device for planting garlic has a sectional design. Each row uses a separate section with a conveyor and a hopper for planting material. The capacity of one hopper is 10 liters. The drive of the dosing mechanism of the planter for garlic and onions is driven from the support-driven wheels. The garlic planter uses a single-shaft drive system for the dosing mechanism. The planting step in the row: 110 mm, 125 mm and 140 mm, is adjusted by changing the gear ratio on the chain gearbox of the garlic planter. To compensate for the chain length in the planter for garlic and onions a tensioner is used. The opener and furrow closers in the onion and garlic planter are adjustable. The planting depth of the seeder for garlic and onions is 60-80 mm. The inter-row width of the garlic seeder is adjustable in the range from 200 to 320 mm.
Track width of the seeder for garlic and onions – 1185 mm.
A row marker is installed on the garlic planter for marking and aligning rows.
Equipment of the garlic planter ChS21:
hopper – 3 pcs.; conveyor – 3 pcs.; frame – 1 pc.; support-driven wheel – 2 pcs.; chain drive – 1 pc.; row marker. Overall dimensions – 1335*980*970 mm
Weight – 66.2 kg.
Dear buyers! The design, color and package contents of the garlic planter manufactured by "Kryuchkov" may not match the photo on the official website. Before purchase, clarify the parameters and characteristics that are important to you.
Before shipment of the garlic planter, be sure to coordinate the compatibility of the garlic seeder with your motor-tractor with the manager.
Aggregating vehicle: motor-tractor
Power of the aggregating vehicle, hp: from 12
Type of opener: keel-shaped (anchor)
Planting step in row, mm: 110/125/140
Planting depth of seed, mm: from 60 to 80
Seeding rate of garlic cloves, pcs: 7-10 per 1 meter
Drive of the dosing seed feed mechanism: from the ground-engaging wheels
Number of rows sown simultaneously, pcs: 3
Interrow interval, mm: from 200 to 320
Manufacturer: Kryuchkov
Type of seeding mechanism: cup (spoon) type
Cup diameter, mm: 34; 24.5 (two interchangeable cups)
Hopper volume for seed, l: 10 (3 hoppers)
Weight, kg: 66
Published on 2026/10/11
Garlic planter 3-row ChS21 (2 sets of cups - 34 mm and 24.5 mm) is designed for coupling with motor-tractors. The design of the hitch unit of the garlic planter is calculated for single-point attachment of the motor-block type and the use of a hydraulic lift system. The garlic planter is intended for use with a motor-tractor with power from 12 hp. When using the garlic planter with a motor-tractor more powerful than 24 hp, a limited warranty is provided. In such cases it is necessary to work with caution, monitoring the load on the units of the garlic seeder.
Purpose and conditions of use of the garlic planter ChS21
The mounted garlic seeder is intended for planting garlic cloves, single-clove garlic and onion sets on pre-tilled and prepared soils, with soil moisture not more than 30%. For planting it is necessary to use calibrated planting material sized 15-35 mm.
Design features of the agrotechnics for growing garlic ChS21
The device for planting garlic has a sectional design. Each row uses a separate section with a conveyor and a hopper for planting material. The capacity of one hopper is 10 liters. The drive of the dosing mechanism of the planter for garlic and onions is driven from the support-driven wheels. The garlic planter uses a single-shaft drive system for the dosing mechanism. The planting step in the row: 110 mm, 125 mm and 140 mm, is adjusted by changing the gear ratio on the chain gearbox of the garlic planter. To compensate for the chain length in the planter for garlic and onions a tensioner is used. The opener and furrow closers in the onion and garlic planter are adjustable. The planting depth of the seeder for garlic and onions is 60-80 mm. The inter-row width of the garlic seeder is adjustable in the range from 200 to 320 mm.
Track width of the seeder for garlic and onions – 1185 mm.
A row marker is installed on the garlic planter for marking and aligning rows.
Equipment of the garlic planter ChS21:
hopper – 3 pcs.; conveyor – 3 pcs.; frame – 1 pc.; support-driven wheel – 2 pcs.; chain drive – 1 pc.; row marker. Overall dimensions – 1335*980*970 mm
Weight – 66.2 kg.
Dear buyers! The design, color and package contents of the garlic planter manufactured by "Kryuchkov" may not match the photo on the official website. Before purchase, clarify the parameters and characteristics that are important to you.
Before shipment of the garlic planter, be sure to coordinate the compatibility of the garlic seeder with your motor-tractor with the manager.
Aggregating vehicle: motor-tractor
Power of the aggregating vehicle, hp: from 12
Type of opener: keel-shaped (anchor)
Planting step in row, mm: 110/125/140
Planting depth of seed, mm: from 60 to 80
Seeding rate of garlic cloves, pcs: 7-10 per 1 meter
Drive of the dosing seed feed mechanism: from the ground-engaging wheels
Number of rows sown simultaneously, pcs: 3
Interrow interval, mm: from 200 to 320
Manufacturer: Kryuchkov
Type of seeding mechanism: cup (spoon) type
Cup diameter, mm: 34; 24.5 (two interchangeable cups)
Hopper volume for seed, l: 10 (3 hoppers)
Weight, kg: 66
Contact the seller
User is offline
- 438 active listings
- Company
- Registered for Yesterday
- Дніпро, Дніпропетровська область, Україна