Motor-cultivator Kentavr MK30-1T

9,606 ₴
Cultivators
Yesterday 12:37
Україна
Дніпро Get directions →
вул. Надії Алексєєнко, 70
2 views
Published 14 hours ago by Kentavr
9,606 ₴
In Cultivators category
вул. Надії Алексєєнко, 70, Дніпро, Україна
Get directions →
2 item views

Description of the Kentavr MK30-1T motor-cultivator The garden-plot motor-cultivator MK30-1T is a new model in the “KENTAVR” line of motor-cultivators. It is designed for fast and effective soil loosening on plots up to 0.3 hectares, as well as on beds, flowerbeds, in gardens and vineyards. The motor-cultivator is equipped with a 4-section tine assembly with a cultivation width of 450 mm, which allows soil to be loosened with maximum precision and neatness next to tree trunks, bushes or other plantings, as well as near fences, curbs, around posts, decorative park structures and rock gardens. A wide handlebar with soft ergonomic grips, a clutch lever of modern design, a convenient hand-throttle lever, an additional plastic transport wheel, protective guards that cover the tines across the full width — all this allows operation without applying significant physical force, so use will be comfortable and safe even for women and the elderly. Due to the power of a reliable 4-stroke gasoline engine of 4.5 hp, the motor-cultivator is capable of quality soil loosening in one pass to a depth of up to 130 mm, even on fairly compact soils or on soils that have not been previously cultivated. The gasoline engine provides the motor-cultivator with autonomy for field work, has a small weight, starts easily at low air temperatures, responds quickly to throttle control, and is simple and accessible in maintenance and operation. The engine is equipped with an efficient air filter and a manual starter. The muffler is covered with a protective casing to avoid possible burns. The motor-cultivator drive is carried out by a V-belt transmission with a controlled pressure roller. The drive of the tines is carried out by a worm gearbox. The belt drive serves simultaneously as the power transmission, clutch and a protection and safety element. If during operation the tine suddenly jams on a stone or stick, the belt drive will cushion the impact and prevent damage to the engine and gearbox. In addition, a belt-driven motor-cultivator is significantly lighter in weight and cheaper in price, as well as simpler and more convenient to control and maintain than one with a gear drive. The driving and driven pulleys, as well as the pressure rollers, are not plastic but metal, therefore have a long service life. The V-belt is segmented, with high traction characteristics. For safety and protection from dirt, the entire belt drive is reliably covered with a casing. The motor-cultivator is fitted with a tine rotor with a working diameter of 260 mm. The tine rotor consists of four template-shaped blades in each section. The blades are made of 3 mm thick structural sheet steel. The spiral arrangement of the blades reduces vibration and ensures even loading on the gearbox. All metal surfaces, including the engine frame, tine parts and depth gauge, are well painted for corrosion protection and to extend their service life.

Engine type: Gasoline single-cylinder 4-stroke with air cooling
Maximum power, hp: 5
Maximum crankshaft speed, rpm: 3600
Cylinder volume, cm3: 149
Number of gears forward/reverse: 1/0
Fuel type: Gasoline
Starting system: Manual starter
Engine cooling system: Forced air cooling
Fuel tank capacity, L: 1.8
Clutch type: V-belt with control and pressure roller
Cultivation width, mm: 400
Cultivation depth, mm: 130
Tine rotation speed, rpm: 120
Sets of cultivating blades: 4=2+2
Rotor diameter of tines, mm: 260
Transport wheel: Plastic
Overall dimensions of motor-cultivator (LxWxH): 1460/450/910
Package size (LxWxH): 700х405х470
Operating weight, kg: 33

Read more

Published on 2026/10/11

Description

Description of the Kentavr MK30-1T motor-cultivator The garden-plot motor-cultivator MK30-1T is a new model in the “KENTAVR” line of motor-cultivators. It is designed for fast and effective soil loosening on plots up to 0.3 hectares, as well as on beds, flowerbeds, in gardens and vineyards. The motor-cultivator is equipped with a 4-section tine assembly with a cultivation width of 450 mm, which allows soil to be loosened with maximum precision and neatness next to tree trunks, bushes or other plantings, as well as near fences, curbs, around posts, decorative park structures and rock gardens. A wide handlebar with soft ergonomic grips, a clutch lever of modern design, a convenient hand-throttle lever, an additional plastic transport wheel, protective guards that cover the tines across the full width — all this allows operation without applying significant physical force, so use will be comfortable and safe even for women and the elderly. Due to the power of a reliable 4-stroke gasoline engine of 4.5 hp, the motor-cultivator is capable of quality soil loosening in one pass to a depth of up to 130 mm, even on fairly compact soils or on soils that have not been previously cultivated. The gasoline engine provides the motor-cultivator with autonomy for field work, has a small weight, starts easily at low air temperatures, responds quickly to throttle control, and is simple and accessible in maintenance and operation. The engine is equipped with an efficient air filter and a manual starter. The muffler is covered with a protective casing to avoid possible burns. The motor-cultivator drive is carried out by a V-belt transmission with a controlled pressure roller. The drive of the tines is carried out by a worm gearbox. The belt drive serves simultaneously as the power transmission, clutch and a protection and safety element. If during operation the tine suddenly jams on a stone or stick, the belt drive will cushion the impact and prevent damage to the engine and gearbox. In addition, a belt-driven motor-cultivator is significantly lighter in weight and cheaper in price, as well as simpler and more convenient to control and maintain than one with a gear drive. The driving and driven pulleys, as well as the pressure rollers, are not plastic but metal, therefore have a long service life. The V-belt is segmented, with high traction characteristics. For safety and protection from dirt, the entire belt drive is reliably covered with a casing. The motor-cultivator is fitted with a tine rotor with a working diameter of 260 mm. The tine rotor consists of four template-shaped blades in each section. The blades are made of 3 mm thick structural sheet steel. The spiral arrangement of the blades reduces vibration and ensures even loading on the gearbox. All metal surfaces, including the engine frame, tine parts and depth gauge, are well painted for corrosion protection and to extend their service life.

Engine type: Gasoline single-cylinder 4-stroke with air cooling
Maximum power, hp: 5
Maximum crankshaft speed, rpm: 3600
Cylinder volume, cm3: 149
Number of gears forward/reverse: 1/0
Fuel type: Gasoline
Starting system: Manual starter
Engine cooling system: Forced air cooling
Fuel tank capacity, L: 1.8
Clutch type: V-belt with control and pressure roller
Cultivation width, mm: 400
Cultivation depth, mm: 130
Tine rotation speed, rpm: 120
Sets of cultivating blades: 4=2+2
Rotor diameter of tines, mm: 260
Transport wheel: Plastic
Overall dimensions of motor-cultivator (LxWxH): 1460/450/910
Package size (LxWxH): 700х405х470
Operating weight, kg: 33

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 171 active listings
  • Company
  • Registered for Yesterday
  • Дніпро, Дніпропетровська область, Україна
Recently viewed
БІЛОЦЕРКІВМАЗ БІЛОЦЕРКІВМАЗ Yesterday 13:07
Pro Other Біла Церква Yesterday 13:07
Bushing AG 2.0.02 B
99 ₴
Bushing AG 2.0.02 B
Біла Церква, Україна
The bushing AG 2.0.02 B is a high-quality spare part for AG, AGP, UDA disc harrows that provides reliable fastening of discs and uninterrupted operation of equipment in the demanding conditions of agricultural work. Made from durable materials, this bushing is distinguished by high wear resistance and reliability, making it an ideal choice for equipment that...
Yesterday Other бульвар М. Грушевського, 13
99 ₴
БІЛОЦЕРКІВМАЗ БІЛОЦЕРКІВМАЗ Yesterday 13:06
Pro Other Біла Церква Yesterday 13:06
Bolt AG0.0.22
231 ₴
Bolt AG0.0.22
Біла Церква, Україна
Bolt AG0.0.22 Purpose: The bolt AG0.0.22 is used in disc harrow mechanisms to secure and connect various elements of the structure. It is an important component that provides reliable joining of parts, maintaining stability and the efficient operation of the equipment. Features: -Material: Made of high-quality metal, which gives the bolt high strength and re...
Yesterday Other бульвар М. Грушевського, 13
231 ₴
БІЛОЦЕРКІВМАЗ БІЛОЦЕРКІВМАЗ Yesterday 13:08
Pro Spare parts Біла Церква Yesterday 13:08
Tie bolt BP-15.05.06.000
252 ₴
Tie bolt BP-15.05.06.000
Біла Церква, Україна
Tie bolt BP-15.05.06.000
Yesterday Spare parts бульвар М. Грушевського, 13
252 ₴
Kentavr Kentavr Yesterday 12:37
Pro Cultivators Дніпро Yesterday 12:37
Walk-behind tractor Kentavr MB 40-1C/G-2F (wheels 4.00-8)
34,953 ₴
Walk-behind tractor Kentavr MB 40-1C/G-2F (wheels 4.00-8)
Дніпро, Україна
Description of the Kentavr MB 40-1C/G-2F walk-behind tractor (wheels 4.00-8) The MB40-1C/G-2F walk-behind tractor is a new model in the Kentavr gasoline walk-behind tractor line. It performs soil cultivation well on small and medium-sized plots with various soil types. However, the MB40-1C/G-2F can handle a larger area too — it will just take a bit more time...
Yesterday Cultivators вул. Надії Алексєєнко, 70
34,953 ₴
Kentavr Kentavr Yesterday 12:36
Pro Cultivators Дніпро Yesterday 12:36
Motocultivator Kentavr MK10-2CF
4,510 ₴
Motocultivator Kentavr MK10-2CF
Дніпро, Україна
Description of the Kentavr MK10-2CF motocultivator Compact motocultivator TM "Kentavr" model MK 10-2CF is a small-sized autonomous power unit with a gasoline carburetor engine and a main working tool — a rotary tiller, which belongs to the class of household garden tools. The MK10-2CF differs from the MK10-2C by the presence of a remote air filter, which is ...
Yesterday Cultivators вул. Надії Алексєєнко, 70
4,510 ₴
БІЛОЦЕРКІВМАЗ БІЛОЦЕРКІВМАЗ Yesterday 13:07
Pro Spare parts Біла Церква Yesterday 13:07
Chamomile disc 510 mm 6 holes AG2.1.01-03
1,500 ₴
Chamomile disc 510 mm 6 holes AG2.1.01-03
Біла Церква, Україна
Chamomile disc 510 mm 6 holes AG2.1.01-03
Yesterday Spare parts бульвар М. Грушевського, 13
1,500 ₴
Kentavr Kentavr Yesterday 12:37
Pro Cultivators Дніпро Yesterday 12:37
Power tiller Kentavr MB2060D (wheels 4.00-8)
24,670 ₴
Power tiller Kentavr MB2060D (wheels 4.00-8)
Дніпро, Україна
Description of the Kentavr MB2060D power tiller (wheels 4.00-8) The MB 2060D power tiller and its modification with an electric starter MB 2061D are the most popular among the "Kentavr" models equipped with a diesel engine. These are the base models in the presented lineup. In construction they are very close to the MB 2070B model, they also have a new safe ...
Yesterday Cultivators вул. Надії Алексєєнко, 70
24,670 ₴
Kentavr Kentavr Yesterday 12:36
Pro Seeders and seedlings Дніпро Yesterday 12:36
Seeder SZ-10 disc
21,828 ₴
Seeder SZ-10 disc
Дніпро, Україна
Description of the SZ-10 disc seeder To ease the labor-intensive sowing process, a motor-block or motor-tractor will not only help to properly cultivate and prepare the soil, but also significantly speed up the sowing of cereals and legumes when using the specialized seeder of the “SZ” series. Seeders of the “SZ” series can be used to sow various cereals (ry...
Yesterday Seeders and seedlings вул. Надії Алексєєнко, 70
21,828 ₴
Call