Power tiller Kentavr MB2060D (wheels 4.00-8)
Description of the Kentavr MB2060D power tiller (wheels 4.00-8) The MB 2060D power tiller and its modification with an electric starter MB 2061D are the most popular among the "Kentavr" models equipped with a diesel engine. These are the base models in the presented lineup. In construction they are very close to the MB 2070B model, they also have a new safe normally-open clutch, a high-efficiency air filter and protection against accidental engagement of reverse, but are equipped with a reliable and more economical diesel engine with a power of 6.0 hp. These models are supplied with tillers with a maximum working width of 1140 mm and transport wheels 4.00-10 (for the MB 2060D model an option with 4.00-8 wheels is possible). MB 2060D is the base model of the lineup of power tillers with diesel engines. In construction the diesel tillers are very similar to the gasoline ones, they also have a new safe normally-open clutch, a high-efficiency air filter and a lock to prevent accidental engagement of reverse gear. 2060D is equipped with a diesel engine with a power of 6.0 hp; its modification 2061D-4 additionally has an electric starter and a battery. These power tillers are supplied with tillers with a maximum working width of 1140 mm and transport wheels 4.00-10 (for the MB 2060D model there is an option to equip with wheels 4.00-8).
Engine model: 178F
Fuel type: Diesel
Engine power, hp: 6.0
Engine displacement, cm³: 296
Rated speed, rpm: 3000
Rated fuel consumption, g/kWh: 285
Fuel tank capacity, l: 3.5
Engine starting system: Manual starter
Air filter: Multistage filter with transparent cyclone
Battery type, capacity Ah: -
Engine crankcase capacity, l: 1.1
Type of oil in engine crankcase: TM "DTZ" TURBO SYNT 10W-40 API CF-4/SG
Oil level sensor: None
Engine cooling system: Air cooling
Cooling system capacity, l: -
Coolant type: -
Transmission drive type: Direct gear
Clutch type: Normally-open multi-plate in oil bath
Drive belt type: -
Connector for active implement: -
Gearbox type: Gear
Number of gears: 2/1
Method of engaging reverse: Handle on the handlebars
Tiller drive: Direct with bevel reducer
Power take-off shaft: Rear longitudinal with key Ø18, L=24
Gearbox oil capacity, l: 2.6
Type of oil in gearbox: TM "DTZ" TAD-17I API GL-
Transport wheels: 4.00-8
Wheel track, mm: 600
Rated travel speed on wheels forward/reverse, km/h: 7.0; 9.8 / 5.1
Steering type and adjuster: Quick adjustment for height and direction
Hitch type: Power tiller type
Method of installing the tiller: Instead of transport wheels
Rated tiller rotational speed, rpm: 93; 130 / 68
Number of tiller sections, pcs: 8=(2+1+1)×2
Size/quantity/type of tiller blades: 5.5 MM × 235 MM / 32 pcs.
Tiller working width, mm: 620, 880, 1140
Tiller rotor diameter, mm: 360
Cultivation depth, mm: Up to 200
ADDITIONAL EQUIPMENT: -
Published on 2026/10/11
Description of the Kentavr MB2060D power tiller (wheels 4.00-8) The MB 2060D power tiller and its modification with an electric starter MB 2061D are the most popular among the "Kentavr" models equipped with a diesel engine. These are the base models in the presented lineup. In construction they are very close to the MB 2070B model, they also have a new safe normally-open clutch, a high-efficiency air filter and protection against accidental engagement of reverse, but are equipped with a reliable and more economical diesel engine with a power of 6.0 hp. These models are supplied with tillers with a maximum working width of 1140 mm and transport wheels 4.00-10 (for the MB 2060D model an option with 4.00-8 wheels is possible). MB 2060D is the base model of the lineup of power tillers with diesel engines. In construction the diesel tillers are very similar to the gasoline ones, they also have a new safe normally-open clutch, a high-efficiency air filter and a lock to prevent accidental engagement of reverse gear. 2060D is equipped with a diesel engine with a power of 6.0 hp; its modification 2061D-4 additionally has an electric starter and a battery. These power tillers are supplied with tillers with a maximum working width of 1140 mm and transport wheels 4.00-10 (for the MB 2060D model there is an option to equip with wheels 4.00-8).
Engine model: 178F
Fuel type: Diesel
Engine power, hp: 6.0
Engine displacement, cm³: 296
Rated speed, rpm: 3000
Rated fuel consumption, g/kWh: 285
Fuel tank capacity, l: 3.5
Engine starting system: Manual starter
Air filter: Multistage filter with transparent cyclone
Battery type, capacity Ah: -
Engine crankcase capacity, l: 1.1
Type of oil in engine crankcase: TM "DTZ" TURBO SYNT 10W-40 API CF-4/SG
Oil level sensor: None
Engine cooling system: Air cooling
Cooling system capacity, l: -
Coolant type: -
Transmission drive type: Direct gear
Clutch type: Normally-open multi-plate in oil bath
Drive belt type: -
Connector for active implement: -
Gearbox type: Gear
Number of gears: 2/1
Method of engaging reverse: Handle on the handlebars
Tiller drive: Direct with bevel reducer
Power take-off shaft: Rear longitudinal with key Ø18, L=24
Gearbox oil capacity, l: 2.6
Type of oil in gearbox: TM "DTZ" TAD-17I API GL-
Transport wheels: 4.00-8
Wheel track, mm: 600
Rated travel speed on wheels forward/reverse, km/h: 7.0; 9.8 / 5.1
Steering type and adjuster: Quick adjustment for height and direction
Hitch type: Power tiller type
Method of installing the tiller: Instead of transport wheels
Rated tiller rotational speed, rpm: 93; 130 / 68
Number of tiller sections, pcs: 8=(2+1+1)×2
Size/quantity/type of tiller blades: 5.5 MM × 235 MM / 32 pcs.
Tiller working width, mm: 620, 880, 1140
Tiller rotor diameter, mm: 360
Cultivation depth, mm: Up to 200
ADDITIONAL EQUIPMENT: -
Contact the seller
User is offline
- 171 active listings
- Company
- Registered for Yesterday
- Дніпро, Дніпропетровська область, Україна