Walk-behind tractor Kentavr MB2013B (wheels 4.00-10)
Description of the Kentavr MB2013B walk-behind tractor (wheels 4.00-10) The MB 2013B — structurally identical to the MB 2070B walk-behind tractor, but equipped with a significantly more powerful engine — 13 hp; thanks to this the working width of the rotary tiller has increased to 1400 mm, and productivity during cultivation and other soil treatment operations is noticeably higher. The high engine power and pneumatic transport wheels sized 4.00-10 allow effective use of the walk-behind tractor not only for soil cultivation but also to use it as a transport vehicle for carrying loads on a special trailer. If necessary, wheels sized 5.00-12 can be additionally purchased and installed. The MB 2013B — structurally identical to the base model, but has a significantly more powerful engine — 13 hp. Thanks to this the working width of the rotary tiller has increased to 1400 mm, therefore productivity during cultivation and other soil treatment operations is noticeably higher. Moreover, the high engine power and 10-inch pneumatic transport wheels allow the MB 2013B to be used as a transport vehicle for carrying loads on a special trailer. Especially since wheels sized 5.00-12 can also be additionally purchased and installed.
Engine model: 188F
Fuel type: Petrol
Engine power, hp: 13.0
Engine displacement, cm³: 389
Rated speed, rpm: 3000
Rated fuel consumption, g/kW·h: 366
Fuel tank capacity, l: 6.0
Engine starting system: Manual starter
Air filter: With remote air intake on the handlebar
Battery type, capacity A·h: -
Engine crankcase capacity, l: 1.2
Type of oil in engine crankcase: TM DTZ TURBO SYNT 10W-40 API CF-4/SG
Oil level sensor: Yes
Engine cooling system: Air cooling
Cooling system capacity, l: -
Type of coolant: -
Transmission drive type: Direct gear
Clutch type: Normally disengaged multi-plate in oil bath
Drive belt type: -
Connector for active attachments: -
Gearbox type: Gear
Number of gears: 2/1
Method of engaging reverse: Handle on the handlebar
Tiller drive: Direct with bevel gearbox
Power take-off shaft: Rear longitudinal with keyway Ø18, L=24
Gearbox oil capacity, l: 2.6
Type of oil in gearbox: TM DTZ TAD-17 И API GL-46
Transport wheels: 4.00-10
Wheel track, mm: 600
Rated travel speed on wheels forward/reverse, km/h: 8.3; 11.6 / 6.1
Steering type and adjuster: Quick adjustment for height and direction
Trailer hitch type: Walk-behind tractor type
Method of installing rotary tiller: Instead of transport wheels
Rated rotary tiller speed, rpm: 93; 130 / 68
Number of rotary tiller sections, pcs: 10=(3+1+1)×2
Size/number/type of rotary tiller blades: 6 MM × 235 MM / 40 pcs.
Rotary tiller working width, mm: 880, 1140, 1400
Rotor diameter of rotary tiller, mm: 360
Cultivation depth, mm: Up to 200
Electrical equipment: -
Published on 2026/10/11
Description of the Kentavr MB2013B walk-behind tractor (wheels 4.00-10) The MB 2013B — structurally identical to the MB 2070B walk-behind tractor, but equipped with a significantly more powerful engine — 13 hp; thanks to this the working width of the rotary tiller has increased to 1400 mm, and productivity during cultivation and other soil treatment operations is noticeably higher. The high engine power and pneumatic transport wheels sized 4.00-10 allow effective use of the walk-behind tractor not only for soil cultivation but also to use it as a transport vehicle for carrying loads on a special trailer. If necessary, wheels sized 5.00-12 can be additionally purchased and installed. The MB 2013B — structurally identical to the base model, but has a significantly more powerful engine — 13 hp. Thanks to this the working width of the rotary tiller has increased to 1400 mm, therefore productivity during cultivation and other soil treatment operations is noticeably higher. Moreover, the high engine power and 10-inch pneumatic transport wheels allow the MB 2013B to be used as a transport vehicle for carrying loads on a special trailer. Especially since wheels sized 5.00-12 can also be additionally purchased and installed.
Engine model: 188F
Fuel type: Petrol
Engine power, hp: 13.0
Engine displacement, cm³: 389
Rated speed, rpm: 3000
Rated fuel consumption, g/kW·h: 366
Fuel tank capacity, l: 6.0
Engine starting system: Manual starter
Air filter: With remote air intake on the handlebar
Battery type, capacity A·h: -
Engine crankcase capacity, l: 1.2
Type of oil in engine crankcase: TM DTZ TURBO SYNT 10W-40 API CF-4/SG
Oil level sensor: Yes
Engine cooling system: Air cooling
Cooling system capacity, l: -
Type of coolant: -
Transmission drive type: Direct gear
Clutch type: Normally disengaged multi-plate in oil bath
Drive belt type: -
Connector for active attachments: -
Gearbox type: Gear
Number of gears: 2/1
Method of engaging reverse: Handle on the handlebar
Tiller drive: Direct with bevel gearbox
Power take-off shaft: Rear longitudinal with keyway Ø18, L=24
Gearbox oil capacity, l: 2.6
Type of oil in gearbox: TM DTZ TAD-17 И API GL-46
Transport wheels: 4.00-10
Wheel track, mm: 600
Rated travel speed on wheels forward/reverse, km/h: 8.3; 11.6 / 6.1
Steering type and adjuster: Quick adjustment for height and direction
Trailer hitch type: Walk-behind tractor type
Method of installing rotary tiller: Instead of transport wheels
Rated rotary tiller speed, rpm: 93; 130 / 68
Number of rotary tiller sections, pcs: 10=(3+1+1)×2
Size/number/type of rotary tiller blades: 6 MM × 235 MM / 40 pcs.
Rotary tiller working width, mm: 880, 1140, 1400
Rotor diameter of rotary tiller, mm: 360
Cultivation depth, mm: Up to 200
Electrical equipment: -
Contact the seller
User is offline
- 171 active listings
- Company
- Registered for Yesterday
- Дніпро, Дніпропетровська область, Україна