Poltava vibrating belt single-row potato digger KK8 for walk-behind tractor
Double-eccentric vibrating Poltava single-row potato digger for the Zirka - 61 walk-behind tractor (KK8) is suitable for digging potatoes and other root crops (onions, garlic, carrots) in fields with well-dried soil of varying difficulty. To make the work process most productive, the area should be pre-cleared of weeds and the tops should be cut thoroughly.
The device is attached to walk-behind tractors equipped with a side power take-off shaft and drying, with power from 8 horsepower. An important point - this KK8 digger for a walk-behind tractor should not exceed a speed of 2 km/h when working on heavy soils, and on light soils no more than 1 km/h; it is better to use reduced engine speed and increased traction ability.
This Poltava single-row KK8 potato digger is capable of extracting tubers from the ground at a maximum depth of 20 cm, which allows harvesting almost the entire crop and minimizes possible losses. With proper operation on fields up to 2 ha, the productivity of this walk-behind tractor digger model reaches 90%.
Potato digging is carried out by cutting large layers of soil together with tubers with an active knife, after which they are fed onto the sieve bars, where they are cleaned of soil by intensive shaking and thrown behind the vehicle onto the field surface. The active knife has a width of 39 cm.
The vibrating Poltava single-row potato digger has a fairly simple, yet very effective mechanism — the walk-behind tractor, through a belt drive, actuates two connecting rods and two eccentrics, causing reciprocating motions of the striker and the knife. The presence of two eccentrics increases the productivity of the working process of this vibrating walk-behind tractor digger, since the knife and the striker are driven by different eccentrics. This same feature provides a smooth movement of the structure, which weighs 45 kg.
Poltava single-row potato digger KK8: main features of the model:
The presence of two connecting rods and two eccentrics.
Aggregation with walk-behind tractors from 8 horsepower.
High tuber digging productivity - up to 98%.
Quality operation on soils of any difficulty.
Aggregating vehicle: walk-behind tractor
Power of aggregating vehicle, hp: from 8
Number of rows dug simultaneously, pcs: 1
Digging depth, mm: 200
Knife metal thickness, mm: 5
Weight, kg: 45
Working width, m: 0.39
Published on 2026/10/11
Double-eccentric vibrating Poltava single-row potato digger for the Zirka - 61 walk-behind tractor (KK8) is suitable for digging potatoes and other root crops (onions, garlic, carrots) in fields with well-dried soil of varying difficulty. To make the work process most productive, the area should be pre-cleared of weeds and the tops should be cut thoroughly.
The device is attached to walk-behind tractors equipped with a side power take-off shaft and drying, with power from 8 horsepower. An important point - this KK8 digger for a walk-behind tractor should not exceed a speed of 2 km/h when working on heavy soils, and on light soils no more than 1 km/h; it is better to use reduced engine speed and increased traction ability.
This Poltava single-row KK8 potato digger is capable of extracting tubers from the ground at a maximum depth of 20 cm, which allows harvesting almost the entire crop and minimizes possible losses. With proper operation on fields up to 2 ha, the productivity of this walk-behind tractor digger model reaches 90%.
Potato digging is carried out by cutting large layers of soil together with tubers with an active knife, after which they are fed onto the sieve bars, where they are cleaned of soil by intensive shaking and thrown behind the vehicle onto the field surface. The active knife has a width of 39 cm.
The vibrating Poltava single-row potato digger has a fairly simple, yet very effective mechanism — the walk-behind tractor, through a belt drive, actuates two connecting rods and two eccentrics, causing reciprocating motions of the striker and the knife. The presence of two eccentrics increases the productivity of the working process of this vibrating walk-behind tractor digger, since the knife and the striker are driven by different eccentrics. This same feature provides a smooth movement of the structure, which weighs 45 kg.
Poltava single-row potato digger KK8: main features of the model:
The presence of two connecting rods and two eccentrics.
Aggregation with walk-behind tractors from 8 horsepower.
High tuber digging productivity - up to 98%.
Quality operation on soils of any difficulty.
Aggregating vehicle: walk-behind tractor
Power of aggregating vehicle, hp: from 8
Number of rows dug simultaneously, pcs: 1
Digging depth, mm: 200
Knife metal thickness, mm: 5
Weight, kg: 45
Working width, m: 0.39
Contact the seller
User is offline
- 438 active listings
- Company
- Registered for Yesterday
- Дніпро, Дніпропетровська область, Україна