Two-row garlic planter ChS2 for onion and garlic for a power tiller

14,600 ₴
Seeders and seedlings
Yesterday 12:28
Україна
Дніпро Get directions →
вул. Тітова, 26
7 views
Published 16 hours ago by AGROZIP
14,600 ₴
вул. Тітова, 26, Дніпро, Україна
Get directions →
7 item views

Planter for garlic and onion 2-row ChS2 (standard scoops - 24.5 mm) is designed to work with a power tiller. The design of the hitch unit of the onion and garlic planter is calculated for a single-point power-tiller-type attachment. The garlic planter is designed for use with a power tiller with power from 8 hp. When using the garlic planter with a motor tractor more powerful than 12 hp, a limited warranty is provided. In such cases you must work carefully, monitoring the load on the units of the garlic and onion planter.
Purpose and operating conditions of the ChS2 garlic planter
The mounted garlic planter is intended for planting garlic cloves, single-clove bulbs and onion sets on pre-tilled and prepared soils, with soil moisture no more than 30%. For planting, calibrated planting material sized 15-25 mm must be used.
Design features of the ChS2 garlic planter
The capacity of the seed-material hoppers is 10 liters x 2 pcs. The drive of the dosing mechanism is from the support-drive wheel. Planting spacing in the row: 110 mm, 125 mm, 140 mm, is adjusted by changing the gear ratio on the chain gearbox of the garlic planter. A tensioner is used to compensate for chain length. The furrower and covering discs are adjustable, planting depth – 60-80 mm. A row marker is used for marking and aligning rows.
Completeness of the ChS2 garlic planter:
hopper - 2 pcs; conveyor - 2 pcs; frame; support-drive wheel - 2 pcs; chain drive - 1 pc; row marker. Overall dimensions – 1280 × 800 × 970 mm.
Weight – 47 kg. PLANTER WITHOUT PLOW SHARE included.
Dear buyers! The design, color and equipment package of the garlic planter manufactured by "Kryuchkov" may not match the photo on the official website. Before purchase, clarify the parameters and characteristics important to you.
Before shipment of the garlic planter, be sure to agree with the manager the compatibility of the equipment with your power tiller.

Aggregating vehicle: power tiller
Power of the aggregating vehicle, hp: from 6
Weight, kg: 47
Type of furrower: keel-shaped (anchor)
Scoop diameter, mm: 24.5
Seeding step in the row, mm: 110/125/140
Seeding depth, mm: from 60 to 80
Seeding rate of garlic cloves, pcs: 7-10 per 1 meter
Number of rows sown simultaneously, pcs: 2
Inter-row interval, mm: from 200 to 580
Drive of the seed feed dosing mechanism: from the ground-engaging wheels
Hopper volume for seeds, l: 10 (2 hoppers)
Manufacturer: Kryuchkov
Type of seeding mechanism: scoop-type

Read more

Published on 2026/10/11

Description

Planter for garlic and onion 2-row ChS2 (standard scoops - 24.5 mm) is designed to work with a power tiller. The design of the hitch unit of the onion and garlic planter is calculated for a single-point power-tiller-type attachment. The garlic planter is designed for use with a power tiller with power from 8 hp. When using the garlic planter with a motor tractor more powerful than 12 hp, a limited warranty is provided. In such cases you must work carefully, monitoring the load on the units of the garlic and onion planter.
Purpose and operating conditions of the ChS2 garlic planter
The mounted garlic planter is intended for planting garlic cloves, single-clove bulbs and onion sets on pre-tilled and prepared soils, with soil moisture no more than 30%. For planting, calibrated planting material sized 15-25 mm must be used.
Design features of the ChS2 garlic planter
The capacity of the seed-material hoppers is 10 liters x 2 pcs. The drive of the dosing mechanism is from the support-drive wheel. Planting spacing in the row: 110 mm, 125 mm, 140 mm, is adjusted by changing the gear ratio on the chain gearbox of the garlic planter. A tensioner is used to compensate for chain length. The furrower and covering discs are adjustable, planting depth – 60-80 mm. A row marker is used for marking and aligning rows.
Completeness of the ChS2 garlic planter:
hopper - 2 pcs; conveyor - 2 pcs; frame; support-drive wheel - 2 pcs; chain drive - 1 pc; row marker. Overall dimensions – 1280 × 800 × 970 mm.
Weight – 47 kg. PLANTER WITHOUT PLOW SHARE included.
Dear buyers! The design, color and equipment package of the garlic planter manufactured by "Kryuchkov" may not match the photo on the official website. Before purchase, clarify the parameters and characteristics important to you.
Before shipment of the garlic planter, be sure to agree with the manager the compatibility of the equipment with your power tiller.

Aggregating vehicle: power tiller
Power of the aggregating vehicle, hp: from 6
Weight, kg: 47
Type of furrower: keel-shaped (anchor)
Scoop diameter, mm: 24.5
Seeding step in the row, mm: 110/125/140
Seeding depth, mm: from 60 to 80
Seeding rate of garlic cloves, pcs: 7-10 per 1 meter
Number of rows sown simultaneously, pcs: 2
Inter-row interval, mm: from 200 to 580
Drive of the seed feed dosing mechanism: from the ground-engaging wheels
Hopper volume for seeds, l: 10 (2 hoppers)
Manufacturer: Kryuchkov
Type of seeding mechanism: scoop-type

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 438 active listings
  • Company
  • Registered for Yesterday
  • Дніпро, Дніпропетровська область, Україна
Recently viewed
AGROZIP AGROZIP Yesterday 12:28
Pro Seeders and seedlings Дніпро Yesterday 12:28
Potato planter Polish Bomet with fertilizer hopper (row spacing 70 - 75 cm)
31,800 ₴
Potato planter Polish Bomet with fertilizer hopper (row spacing 70 - 75 cm)
Дніпро, Україна
Sturdy agricultural equipment - potato planter Polish Bomet with fertilizer hopper (row spacing 70-75 cm), designed for high operational loads and performing two work processes simultaneously - planting sorted seed potatoes (diameter 60 mm) and applying mineral fertilizers directly during planting operations.For continuous long-term work the Bomet potato pla...
Yesterday Seeders and seedlings вул. Тітова, 26
31,800 ₴
AGROZIP AGROZIP Yesterday 12:28
Pro Seeders and seedlings Дніпро Yesterday 12:28
Three-row garlic and onion seeder ChS3 for motor-tractor garlic planter
21,750 ₴
Three-row garlic and onion seeder ChS3 for motor-tractor garlic planter
Дніпро, Україна
Garlic planter 3-row ChS3 (standard scoops Ø24.5) is designed to be attached to motor-tractors. The design of the trailer hitch unit of the garlic planter is calculated for a single-point mounting of the motor-block type and the use of a hydraulic lift system. The garlic planter is designed for use with a motor-tractor with power from 12 hp. When using the g...
Yesterday Seeders and seedlings вул. Тітова, 26
21,750 ₴
AGROZIP AGROZIP Yesterday 12:28
Pro Seeders and seedlings Дніпро Yesterday 12:28
Four-row planter CHS-14 for garlic and onions for mini-tractor
30,970 ₴
Four-row planter CHS-14 for garlic and onions for mini-tractor
Дніпро, Україна
Functional garlic planter for mini-tractor CHS-14 is equipped with all necessary adjustments for efficient work planting bulb crops on pre-prepared fields of medium and large areas. It has four hoppers with a capacity of 10 L each, intended for planting calibrated garlic (25-35 mm) and onion sets. It is attached to tractors with power from 12 horsepower with...
Yesterday Seeders and seedlings вул. Тітова, 26
30,970 ₴
AGROZIP AGROZIP Yesterday 12:30
Pro Soil treatment Дніпро Yesterday 12:30
Spear-shaped cultivator 1.8 m two-row foldable pre-sowing fallow for tractor (11 tines on
18,500 ₴
Spear-shaped cultivator 1.8 m two-row foldable pre-sowing fallow for tractor (11 tines on
Дніпро, Україна
Aggregating towing vehicle: mini-tractor Power of aggregating towing vehicle, hp: from 24 Working width, m: 1.8 Type of working elements: spear-shaped tines Number of working elements (tines), pcs: 11 Manufacturer: SHIP
Yesterday Soil treatment вул. Тітова, 26
18,500 ₴
Call