Walk-behind Tractor Kentavr MB2070B (wheels 4.00-8)
Description of the Kentavr MB2070B walk-behind tractor (wheels 4.00-8) MB 2070B (4.00-8) is a base model of the walk-behind tractor line with direct drive, one of the most popular Kentavr models. The direct drive to the gearbox is implemented through a multi-plate clutch, has lower power losses than a belt drive, which allows full use of the engine’s potential, improves fuel efficiency and increases the tractor’s effectiveness. The clutch is new and safe, of the normally open type. The center of gravity is located lower than on tractors with belt drive, which improves stability and reduces vibration when working with the tiller. There is no need to constantly monitor the condition and tension of the drive belts. The air filter with a remote intake on the handlebar significantly prolongs the engine’s service life. The reverse lever has a lock to prevent accidental engagement. The tractor is equipped with transport wheels sized 4.00-8, which provide greater tractive effort.
Engine model: 170F
Fuel type: Gasoline
Engine power, hp: 7.0
Engine displacement, cm³: 208
Rated speed, rpm: 3000
Rated fuel consumption, g/kW·h: ≤374
Fuel tank capacity, L: 6.0
Engine start system: Manual starter
Air filter: Two-stage (with oil bath)
Battery type, capacity A·h: -
Engine crankcase volume, L: 0.6
Type of oil in engine crankcase: TM “DTZ” TURBO SYNT 10W-40 API CF-4/SG
Oil level sensor: Yes
Engine cooling system: Air cooling
Cooling system volume, L: -
Coolant type: -
Transmission drive type: Direct, via clutch
Clutch type: Normally open multi-plate in oil bath
Drive belt type: -
Connector for attaching active implements: -
Gearbox type: Gear
Number of gears: 2/1
Method of engaging reverse: Handle on the handlebar
Tiller drive: Direct with bevel gearbox
Power take-off shaft: Rear longitudinal with keyway Ø18, L=24
Transmission crankcase oil volume, L: 2.6
Type of oil in transmission crankcase: TM “DTZ” TAD-17i API GL-
Transport wheels: 4.00-8
Wheel track, mm: 600
Rated travel speed on wheels forward/reverse, km/h: 7.0; 9.8 / 5.1
Handlebar type and adjuster: Quick adjustment for height and direction
Hitch type: Walk-behind-tractor type
Method of installing the tiller: In place of the transport wheels
Rated tiller rotation speed, rpm: 93; 130 / 68
Number of tiller sections, pcs: 8=(2+1+1)×2
Tiller blade size/quantity/type: (5.5×235) × 32 pcs
Tiller working width, mm: 620, 880, 1140
Tiller rotor diameter, mm: 360
Cultivation depth, mm: Up to 200
Electrical equipment: -
Published on 2026/10/11
Description of the Kentavr MB2070B walk-behind tractor (wheels 4.00-8) MB 2070B (4.00-8) is a base model of the walk-behind tractor line with direct drive, one of the most popular Kentavr models. The direct drive to the gearbox is implemented through a multi-plate clutch, has lower power losses than a belt drive, which allows full use of the engine’s potential, improves fuel efficiency and increases the tractor’s effectiveness. The clutch is new and safe, of the normally open type. The center of gravity is located lower than on tractors with belt drive, which improves stability and reduces vibration when working with the tiller. There is no need to constantly monitor the condition and tension of the drive belts. The air filter with a remote intake on the handlebar significantly prolongs the engine’s service life. The reverse lever has a lock to prevent accidental engagement. The tractor is equipped with transport wheels sized 4.00-8, which provide greater tractive effort.
Engine model: 170F
Fuel type: Gasoline
Engine power, hp: 7.0
Engine displacement, cm³: 208
Rated speed, rpm: 3000
Rated fuel consumption, g/kW·h: ≤374
Fuel tank capacity, L: 6.0
Engine start system: Manual starter
Air filter: Two-stage (with oil bath)
Battery type, capacity A·h: -
Engine crankcase volume, L: 0.6
Type of oil in engine crankcase: TM “DTZ” TURBO SYNT 10W-40 API CF-4/SG
Oil level sensor: Yes
Engine cooling system: Air cooling
Cooling system volume, L: -
Coolant type: -
Transmission drive type: Direct, via clutch
Clutch type: Normally open multi-plate in oil bath
Drive belt type: -
Connector for attaching active implements: -
Gearbox type: Gear
Number of gears: 2/1
Method of engaging reverse: Handle on the handlebar
Tiller drive: Direct with bevel gearbox
Power take-off shaft: Rear longitudinal with keyway Ø18, L=24
Transmission crankcase oil volume, L: 2.6
Type of oil in transmission crankcase: TM “DTZ” TAD-17i API GL-
Transport wheels: 4.00-8
Wheel track, mm: 600
Rated travel speed on wheels forward/reverse, km/h: 7.0; 9.8 / 5.1
Handlebar type and adjuster: Quick adjustment for height and direction
Hitch type: Walk-behind-tractor type
Method of installing the tiller: In place of the transport wheels
Rated tiller rotation speed, rpm: 93; 130 / 68
Number of tiller sections, pcs: 8=(2+1+1)×2
Tiller blade size/quantity/type: (5.5×235) × 32 pcs
Tiller working width, mm: 620, 880, 1140
Tiller rotor diameter, mm: 360
Cultivation depth, mm: Up to 200
Electrical equipment: -
Contact the seller
User is offline
- 171 active listings
- Company
- Registered for Yesterday
- Дніпро, Дніпропетровська область, Україна