Fertilizer spreader for tractor 500 liters Jar-Met (plastic)

Fertilizer spreader for tractor 500 liters Jar-Met (plastic)

11,700 ₴
Fertilizer scattering equipment
Yesterday 12:31
Україна
Дніпро Get directions →
вул. Тітова, 26
7 views
Published 13 hours ago by AGROZIP
11,700 ₴
вул. Тітова, 26, Дніпро, Україна
Get directions →
7 item views

The fertilizer spreader for tractor 500 L Jar-Met (plastic) is designed for mechanized treatment of large areas - uniform application of bulk and fine-granulated mineral substances over the entire field surface, in precisely set dosed quantities. It has large loading volumes - up to 500 L, and can operate for long periods without stops.
The Jar-Met 500 L spreader is attached to mini tractors with at least 25 horsepower via a rear three-point hitch. The unit is secured with strong bolted connections on a bent reinforced frame made of round profile tubes. The receiving hopper is made of quality plastic, with high resistance to mechanical loads and aggressive chemical compositions. Under the funnel is installed the main working assembly - a galvanized disc and four spreading blades. Inside the hopper there are two openings and a metal agitator. The spreading mechanism is connected via a driveshaft and an angle gearbox to the PTO of the vehicle used.
The amount of mineral substances delivered to the fertilizer spreader for tractor 500 L Jar-Met (plastic) is regulated by a special dosing device - two steel shutters with a manual control lever that controls the supply of fertilizer to the working mechanism. To set the required working width it is necessary to change the angle of the spreading blades on the disc - the possible spreading range is from 8 to 24 meters.
Advantages of the fertilizer spreader for tractor 500 L Jar-Met (plastic):

The presence of a galvanized disc and four spreading blades.
Manual control of the dosers.
Large loading hopper volume.
Bent profile frame with increased strength.

Aggregating vehicle: mini tractor
Weight, kg: 60
Spreading mechanism of mineral fertilizers: disc-type
Number of working discs, pcs: 1
Type of doser: slot
Working blades on disc, pcs: 4
Manufacturer: Jar-Met
Required power of aggregating vehicle, hp: from 25
Maximum hopper capacity, L: 500
Working width, m: 8 - 24

Read more

Published on 2026/10/11

Description

The fertilizer spreader for tractor 500 L Jar-Met (plastic) is designed for mechanized treatment of large areas - uniform application of bulk and fine-granulated mineral substances over the entire field surface, in precisely set dosed quantities. It has large loading volumes - up to 500 L, and can operate for long periods without stops.
The Jar-Met 500 L spreader is attached to mini tractors with at least 25 horsepower via a rear three-point hitch. The unit is secured with strong bolted connections on a bent reinforced frame made of round profile tubes. The receiving hopper is made of quality plastic, with high resistance to mechanical loads and aggressive chemical compositions. Under the funnel is installed the main working assembly - a galvanized disc and four spreading blades. Inside the hopper there are two openings and a metal agitator. The spreading mechanism is connected via a driveshaft and an angle gearbox to the PTO of the vehicle used.
The amount of mineral substances delivered to the fertilizer spreader for tractor 500 L Jar-Met (plastic) is regulated by a special dosing device - two steel shutters with a manual control lever that controls the supply of fertilizer to the working mechanism. To set the required working width it is necessary to change the angle of the spreading blades on the disc - the possible spreading range is from 8 to 24 meters.
Advantages of the fertilizer spreader for tractor 500 L Jar-Met (plastic):

The presence of a galvanized disc and four spreading blades.
Manual control of the dosers.
Large loading hopper volume.
Bent profile frame with increased strength.

Aggregating vehicle: mini tractor
Weight, kg: 60
Spreading mechanism of mineral fertilizers: disc-type
Number of working discs, pcs: 1
Type of doser: slot
Working blades on disc, pcs: 4
Manufacturer: Jar-Met
Required power of aggregating vehicle, hp: from 25
Maximum hopper capacity, L: 500
Working width, m: 8 - 24

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 438 active listings
  • Company
  • Registered for Yesterday
  • Дніпро, Дніпропетровська область, Україна
Recently viewed
ДТЗ ДТЗ Yesterday 12:49
Rake “Sonechko” GVR-4
7,635 ₴
Rake “Sonechko” GVR-4
Дніпро, Україна
Description of rake “Sonechko” GVR-4: The “Sonechko” rake can be used both for tedding (turning) hay and for raking hay into a windrow. These versatile rakes can be used on tractors, power tillers and mini tractors based on a power tiller. Attachment to the unit is done via the appropriate mounting (purchased separately). Because the discs are mounted on hin...
Yesterday Collecting technique for hay, feed вул. Надії Алексєєнко, 70
7,635 ₴
ДТЗ ДТЗ Yesterday 12:50
Pro Cultivators Дніпро Yesterday 12:50
Universal Hill-maker Strila-1
780 ₴
Universal Hill-maker Strila-1
Дніпро, Україна
Step of depth adjustment, mm: 40Thickness of stake metal, mm: 10х40Hilling depth, mm: up to 250Span of plow wings, mm: 240-320Weight, kg: 4.5
Yesterday Cultivators вул. Надії Алексєєнко, 70
780 ₴
Call