Single-row garlic planter CHSN-1 for walk-behind tractor, planter for garlic and onions
1-row planter for garlic and onions CHSN-1 (2 sets of cups - 23 mm and 26 mm) is intended for use with a walk-behind tractor. The design of the hitch unit of the onion and garlic planter is calculated for single-point mounting of the walk-behind-tractor type. The garlic planter is designed for use with a walk-behind tractor with power from 6 hp. When using the garlic planter with a motor-tractor more powerful than 12 hp, a limited warranty is provided. In such cases it is necessary to work carefully, controlling the load on the units of the garlic and onion planter.
Purpose and operating conditions of the CHSN-1 garlic planter
The mounted garlic planter is intended for planting garlic cloves, single-clove garlic and onion sets on pre-tilled and prepared soils, with soil moisture not exceeding 30%. Calibrated planting material sized 15-28 mm must be used for planting.
Design features of the CHSN-1 garlic planter
The hopper capacity for planting material is 7 liters. Drive of the metering mechanism is from the support-drive wheel. Planting step in a row: 80 mm, 100 mm, 120 mm, is adjusted by changing the gear ratio on the chain reducer of the garlic planter. A tensioner is used to compensate chain length. The coulter and furrow closers are adjustable, planting depth – 30-100 mm.
CHSN-1 garlic seeder package contents:
hopper; conveyor; frame; support-drive wheels; chain drive, Overall dimensions – 740 × 685 × 300 mm.
Weight – 23 kg.
Dear buyers! The design, color and configuration of the garlic planter produced by "ZhMZ" may not match the photo on the official website. Before purchase, clarify the parameters and characteristics important to you.
Before shipment, be sure to agree with the manager the compatibility of the garlic planter with your walk-behind tractor.
Aggregating vehicle: walk-behind tractor
Power of aggregating vehicle, hp: from 6
Type of coulter: keel-shaped (anchor)
Number of rows sown simultaneously, pcs: 1
Seeding rate of garlic cloves, pcs: 7-10 per 1 meter
Drive of the seed feed metering mechanism: from the ground-engaging wheels
Cup diameter, mm: 23; 26 (two interchangeable cups)
Seeding step in the row, mm: 80/100/120
Seeding depth, mm: from 30 to 100
Weight, kg: 23
Hopper volume for seed, l: 7
Manufacturer: Korund
Type of seeding mechanism: cup-type
Published on 2026/10/11
1-row planter for garlic and onions CHSN-1 (2 sets of cups - 23 mm and 26 mm) is intended for use with a walk-behind tractor. The design of the hitch unit of the onion and garlic planter is calculated for single-point mounting of the walk-behind-tractor type. The garlic planter is designed for use with a walk-behind tractor with power from 6 hp. When using the garlic planter with a motor-tractor more powerful than 12 hp, a limited warranty is provided. In such cases it is necessary to work carefully, controlling the load on the units of the garlic and onion planter.
Purpose and operating conditions of the CHSN-1 garlic planter
The mounted garlic planter is intended for planting garlic cloves, single-clove garlic and onion sets on pre-tilled and prepared soils, with soil moisture not exceeding 30%. Calibrated planting material sized 15-28 mm must be used for planting.
Design features of the CHSN-1 garlic planter
The hopper capacity for planting material is 7 liters. Drive of the metering mechanism is from the support-drive wheel. Planting step in a row: 80 mm, 100 mm, 120 mm, is adjusted by changing the gear ratio on the chain reducer of the garlic planter. A tensioner is used to compensate chain length. The coulter and furrow closers are adjustable, planting depth – 30-100 mm.
CHSN-1 garlic seeder package contents:
hopper; conveyor; frame; support-drive wheels; chain drive, Overall dimensions – 740 × 685 × 300 mm.
Weight – 23 kg.
Dear buyers! The design, color and configuration of the garlic planter produced by "ZhMZ" may not match the photo on the official website. Before purchase, clarify the parameters and characteristics important to you.
Before shipment, be sure to agree with the manager the compatibility of the garlic planter with your walk-behind tractor.
Aggregating vehicle: walk-behind tractor
Power of aggregating vehicle, hp: from 6
Type of coulter: keel-shaped (anchor)
Number of rows sown simultaneously, pcs: 1
Seeding rate of garlic cloves, pcs: 7-10 per 1 meter
Drive of the seed feed metering mechanism: from the ground-engaging wheels
Cup diameter, mm: 23; 26 (two interchangeable cups)
Seeding step in the row, mm: 80/100/120
Seeding depth, mm: from 30 to 100
Weight, kg: 23
Hopper volume for seed, l: 7
Manufacturer: Korund
Type of seeding mechanism: cup-type
Contact the seller
User is offline
- 438 active listings
- Company
- Registered for Yesterday
- Дніпро, Дніпропетровська область, Україна