Three-row garlic planter CHS11 (cups Ø34 mm) for motor-tractor — onion and garlic planter

21,750 ₴
Seeders and seedlings
Yesterday 12:28
Україна
Дніпро Get directions →
вул. Тітова, 26
6 views
Published 16 hours ago by AGROZIP
21,750 ₴
вул. Тітова, 26, Дніпро, Україна
Get directions →
6 item views

Three-row garlic planter CHS11 (scoops enlarged Ø34) is intended for use with motor-tractors. The design of the planter's hitch unit is calculated for single-point mounting of the motoblock type and for use with a hydraulic lift system. The garlic planter is designed for use with a motor-tractor with power from 12 hp. When using the garlic planter with a motor-tractor more powerful than 24 hp, a limited warranty is provided. In such cases, it is necessary to work with caution, monitoring the load on the units of the garlic seeder.
Purpose and operating conditions of the garlic planter CHS11
The mounted garlic planter is intended for planting garlic cloves, single-clove bulbs and onion sets in pre-tilled and prepared soils, with soil moisture not exceeding 30%. For planting it is necessary to use calibrated planting material sized 25-35 mm.
Design features of the CHS11 garlic growing agrotechnics
The device for planting garlic has a sectional design. A separate section with a conveyor and a hopper for planting material is used for each row. The capacity of one hopper is 10 liters. The drive of the dosing mechanism of the planter for garlic and onions is carried out from the support-drive wheels. The garlic planter uses a single-shaft drive system for the dosing mechanism. Planting spacing in the row: 110 mm, 125 mm and 140 mm, is adjusted by changing the gear ratio on the planter's chain gearbox. A tensioner is used in the planter for garlic and onions to compensate for chain length. The furrower and press-wheels in the onion and garlic planter are adjustable. Planting depth of the garlic and onion seeder - 60-80 mm. The row spacing of the garlic seeder is adjustable in the range from 200 to 320 mm.
Track width of the garlic and onion seeder – 1185 mm.
A row marker is installed in the garlic planter for marking and aligning rows.
Complete set of the CHS11 garlic planter:
hopper – 3 pcs.; conveyor – 3 pcs.; frame – 1 pc.; support-drive wheel – 2 pcs.; chain drive – 1 pc.; row marker. Overall dimensions – 1335*980*970 mm
Weight – 64.6 kg.
Dear customers! The design, color and delivery set of the garlic planter produced by "Kriuchkov" may not match the photo on the official website. Before purchase, clarify the parameters and characteristics that are important to you.
Before shipping the garlic planter, be sure to coordinate with the manager the compatibility of the garlic seeder with your motor-tractor.

Required power of the towing vehicle, hp: from 12
Towing vehicle: motoblock, motor-tractor
Type of furrower: keel-shaped (anchor)
Seeding step in the row, mm: 110/125/140
Planting depth of seed, mm: from 60 to 80
Rate of planting garlic cloves, pcs: 7-10 per 1 meter
Drive of the dosing seed feed mechanism: from the ground-engaging wheels
Number of rows sown simultaneously, pcs: 3
Inter-row interval, mm: from 200 to 320
Hopper capacity for seed, l: 10 (3 hoppers)
Cup diameter, mm: 34
Weight, kg: 64.6
Manufacturer: Kriuchkov
Type of seeding mechanism: cup (scoop)

Read more

Published on 2026/10/11

Description

Three-row garlic planter CHS11 (scoops enlarged Ø34) is intended for use with motor-tractors. The design of the planter's hitch unit is calculated for single-point mounting of the motoblock type and for use with a hydraulic lift system. The garlic planter is designed for use with a motor-tractor with power from 12 hp. When using the garlic planter with a motor-tractor more powerful than 24 hp, a limited warranty is provided. In such cases, it is necessary to work with caution, monitoring the load on the units of the garlic seeder.
Purpose and operating conditions of the garlic planter CHS11
The mounted garlic planter is intended for planting garlic cloves, single-clove bulbs and onion sets in pre-tilled and prepared soils, with soil moisture not exceeding 30%. For planting it is necessary to use calibrated planting material sized 25-35 mm.
Design features of the CHS11 garlic growing agrotechnics
The device for planting garlic has a sectional design. A separate section with a conveyor and a hopper for planting material is used for each row. The capacity of one hopper is 10 liters. The drive of the dosing mechanism of the planter for garlic and onions is carried out from the support-drive wheels. The garlic planter uses a single-shaft drive system for the dosing mechanism. Planting spacing in the row: 110 mm, 125 mm and 140 mm, is adjusted by changing the gear ratio on the planter's chain gearbox. A tensioner is used in the planter for garlic and onions to compensate for chain length. The furrower and press-wheels in the onion and garlic planter are adjustable. Planting depth of the garlic and onion seeder - 60-80 mm. The row spacing of the garlic seeder is adjustable in the range from 200 to 320 mm.
Track width of the garlic and onion seeder – 1185 mm.
A row marker is installed in the garlic planter for marking and aligning rows.
Complete set of the CHS11 garlic planter:
hopper – 3 pcs.; conveyor – 3 pcs.; frame – 1 pc.; support-drive wheel – 2 pcs.; chain drive – 1 pc.; row marker. Overall dimensions – 1335*980*970 mm
Weight – 64.6 kg.
Dear customers! The design, color and delivery set of the garlic planter produced by "Kriuchkov" may not match the photo on the official website. Before purchase, clarify the parameters and characteristics that are important to you.
Before shipping the garlic planter, be sure to coordinate with the manager the compatibility of the garlic seeder with your motor-tractor.

Required power of the towing vehicle, hp: from 12
Towing vehicle: motoblock, motor-tractor
Type of furrower: keel-shaped (anchor)
Seeding step in the row, mm: 110/125/140
Planting depth of seed, mm: from 60 to 80
Rate of planting garlic cloves, pcs: 7-10 per 1 meter
Drive of the dosing seed feed mechanism: from the ground-engaging wheels
Number of rows sown simultaneously, pcs: 3
Inter-row interval, mm: from 200 to 320
Hopper capacity for seed, l: 10 (3 hoppers)
Cup diameter, mm: 34
Weight, kg: 64.6
Manufacturer: Kriuchkov
Type of seeding mechanism: cup (scoop)

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 438 active listings
  • Company
  • Registered for Yesterday
  • Дніпро, Дніпропетровська область, Україна
Recently viewed
AGROZIP AGROZIP Yesterday 12:29
Pro Soil treatment Дніпро Yesterday 12:29
Disc harrow with roller 2.0 m Bomet mounted for tractor
51,500 ₴
Disc harrow with roller 2.0 m Bomet mounted for tractor
Дніпро, Україна
Purpose: Shredding plant residues after harvest. Loosening and leveling the topsoil layer. Mixing organic residues with the soil to improve its fertility. Breaking clods and final field leveling using the roller. Main characteristics: Working width: 2.0 m. Number of discs: 18 notched discs ("daisy"). Disc diameter: 510 mm. Working depth: up to 15 cm. Weight:...
Yesterday Soil treatment вул. Тітова, 26
51,500 ₴
AGROZIP AGROZIP Yesterday 12:30
Pro Seeders and seedlings Дніпро Yesterday 12:30
Potato planter for walk-behind tractor with fertilizer hopper (45 liters)
5,600 ₴
Potato planter for walk-behind tractor with fertilizer hopper (45 liters)
Дніпро, Україна
Convenient functional equipment - a potato planter for a walk-behind tractor with a fertilizer hopper (45 liters) performs planting and hilling of the tuber while simultaneously applying granular mineral fertilizers into the soil in a mechanized way. Ideal for small private and farming households - potato planting is done in a single row with adjustable spac...
Yesterday Seeders and seedlings вул. Тітова, 26
5,600 ₴
AGROZIP AGROZIP Yesterday 12:29
Pro Soil treatment Дніпро Yesterday 12:29
Clod breaker for disc harrow (cultivator) Bomet 2.60 m
12,000 ₴
Clod breaker for disc harrow (cultivator) Bomet 2.60 m
Дніпро, Україна
The clod breaker for disc harrow (cultivator) Bomet 2.60 m is intended for quality soil cultivation in the pre-sowing or post-harvest period. Using the unit in combination with harrows allows achieving maximum efficiency - the soil is intensively loosened, earth clods are thoroughly broken, and the field surface is leveled. The Bomet 2.60 m roller is attache...
Yesterday Soil treatment вул. Тітова, 26
12,000 ₴
AGROZIP AGROZIP Yesterday 12:28
Pro Seeders and seedlings Дніпро Yesterday 12:28
Potato planter Polish Bomet tractor 2-row (row spacing 50-55 cm)
26,000 ₴
Potato planter Polish Bomet tractor 2-row (row spacing 50-55 cm)
Дніпро, Україна
Specialized convenient potato planter Polish Bomet tractor 2-row (row spacing 50-55 cm) performs the full cycle of planting operations, processing two rows at once in one pass. Designed for planting seed potatoes with a maximum diameter of 60 mm. Thanks to the capacious 180 L hopper it does not require frequent stops for refilling. The unique design allows a...
Yesterday Seeders and seedlings вул. Тітова, 26
26,000 ₴
AGROZIP AGROZIP Yesterday 12:28
Pro Seeders and seedlings Дніпро Yesterday 12:28
Three-row garlic and onion planter CHSN-3 garlic planter for walk-behind tractor
22,600 ₴
Three-row garlic and onion planter CHSN-3 garlic planter for walk-behind tractor
Дніпро, Україна
Effective sturdy garlic planter for a walk-behind tractor CHSN-3 is equipped with three seeding mechanisms with separate chain drives. Designed for planting standard garlic cloves (15-25 mm) and onion sets in fields that have been plowed and cultivated. Operates with equipment of at least 12 horsepower, attaching at the rear with a single-point hitch. It has...
Yesterday Seeders and seedlings вул. Тітова, 26
22,600 ₴
AGROZIP AGROZIP Yesterday 12:28
Pro Seeders and seedlings Дніпро Yesterday 12:28
Potato planter Polish Bomet tractor 2-row (row spacing 70-75 cm)
28,000 ₴
Potato planter Polish Bomet tractor 2-row (row spacing 70-75 cm)
Дніпро, Україна
High-quality semi-mounted equipment - potato planter Polish Bomet tractor 2-row (row spacing 70-75 cm) is distinguished by high planting productivity due to a well-thought-out design and simple convenient adjustment. Used for planting standard tubers sized 60 mm, on medium and large sowing areas.The Polish potato planter is equipped with a receiving metal ho...
Yesterday Seeders and seedlings вул. Тітова, 26
28,000 ₴
Call