Motor-cultivator Kentavr MK20-1

10,125 ₴
Cultivators
1 week
Україна
Дніпро Get directions →
вул. Надії Алексєєнко, 70
55 views
Published 1 week ago by Kentavr
10,125 ₴
In Cultivators category
вул. Надії Алексєєнко, 70, Дніпро, Україна
Get directions →
55 item views

Description of the Kentavr MK20-1 motor-cultivator A garden-urban motor-cultivator MK20-1 is a model in the “KENTAVR” line designed for quick and efficient soil loosening on plots up to 0.05 ha, as well as on beds, flower beds, in gardens and vineyards. The motor-cultivator is equipped with a 4-section cutter with a cultivation width of 450 mm, which allows soil to be loosened with maximum precision and neatness next to tree trunks, shrubs or other plantings, as well as near fences, curbs, around posts, decorative park structures and rock gardens. A wide handlebar with soft ergonomic grips, a clutch lever of modern design, a convenient hand-throttle lever, an additional plastic transport wheel, protective shields that cover the cutter over the entire width — all this makes it unnecessary to apply significant physical force when working with this motor-cultivator, so its use will be comfortable and safe even for women and elderly people. Due to the power of the reliable 4-stroke gasoline engine of 3.0 hp, the motor-cultivator is capable of loosening the soil in two or three passes to a depth of up to 150 mm, even on fairly dense soils or on soils that have not been previously cultivated. The gasoline engine provides the motor-cultivator with autonomy for field work, has low weight, easily starts at low air temperatures, quickly responds to throttle control, and is simple and affordable to service and operate. The engine is equipped with an efficient air filter and a manual starter. The muffler is covered with a protective casing to avoid possible burns. Drive of the motor-cultivator is carried out by a V-belt transmission with a controlled pressure roller. The cutter drive is carried out by a worm gearbox. The belt drive serves simultaneously as a power transmission, clutch and a protective and safety element. If during operation the cutter suddenly jams on a stone or a stick, the belt drive will absorb the impact and prevent damage to the engine and gearbox. In addition, a motor-cultivator with a belt drive is significantly lighter in weight and cheaper in price, as well as simpler and more convenient to operate and maintain than one with a gear drive. The driving and driven pulleys, as well as the pressure rollers, are metal, not plastic, therefore have a long service life. The V-belt is segmented, with high traction characteristics. For safety and protection from dirt the entire belt drive is reliably covered with a casing. The motor-cultivator is fitted with a cutter with a working diameter of 300 mm. The cutter consists of four template-shaped blades in each section. The blades are made of structural sheet steel. The spiral arrangement of the blades reduces vibration and ensures even load distribution on the gearbox. All metal surfaces, including the engine frame, cutter parts and depth gauge, are quality painted for corrosion protection and to extend their service life.

Engine type: Single-cylinder 4-stroke
Maximum power, hp: 3
Maximum crankshaft speed, rpm: 3600
Fuel type: Gasoline
Starting system: Manual start
Engine cooling system: Forced air cooling
Displacement, cm³: 78.5
Fuel consumption (maximum), l/h: 1.08
Fuel tank capacity, l: 1.6
Transmission: Chain reducer
Drive: V-belt transmission
Clutch type: Tension roller
Number of gears, forward/reverse: 1/0
Cultivation width, mm: 450
Cultivation depth, mm: 110
Dimensions of motor-cultivator (L/W/H), mm: 1350х600х650
Curb weight, kg: 28

Read more

Published on 2026/10/11. Modified on 2026/10/20.

Description

Description of the Kentavr MK20-1 motor-cultivator A garden-urban motor-cultivator MK20-1 is a model in the “KENTAVR” line designed for quick and efficient soil loosening on plots up to 0.05 ha, as well as on beds, flower beds, in gardens and vineyards. The motor-cultivator is equipped with a 4-section cutter with a cultivation width of 450 mm, which allows soil to be loosened with maximum precision and neatness next to tree trunks, shrubs or other plantings, as well as near fences, curbs, around posts, decorative park structures and rock gardens. A wide handlebar with soft ergonomic grips, a clutch lever of modern design, a convenient hand-throttle lever, an additional plastic transport wheel, protective shields that cover the cutter over the entire width — all this makes it unnecessary to apply significant physical force when working with this motor-cultivator, so its use will be comfortable and safe even for women and elderly people. Due to the power of the reliable 4-stroke gasoline engine of 3.0 hp, the motor-cultivator is capable of loosening the soil in two or three passes to a depth of up to 150 mm, even on fairly dense soils or on soils that have not been previously cultivated. The gasoline engine provides the motor-cultivator with autonomy for field work, has low weight, easily starts at low air temperatures, quickly responds to throttle control, and is simple and affordable to service and operate. The engine is equipped with an efficient air filter and a manual starter. The muffler is covered with a protective casing to avoid possible burns. Drive of the motor-cultivator is carried out by a V-belt transmission with a controlled pressure roller. The cutter drive is carried out by a worm gearbox. The belt drive serves simultaneously as a power transmission, clutch and a protective and safety element. If during operation the cutter suddenly jams on a stone or a stick, the belt drive will absorb the impact and prevent damage to the engine and gearbox. In addition, a motor-cultivator with a belt drive is significantly lighter in weight and cheaper in price, as well as simpler and more convenient to operate and maintain than one with a gear drive. The driving and driven pulleys, as well as the pressure rollers, are metal, not plastic, therefore have a long service life. The V-belt is segmented, with high traction characteristics. For safety and protection from dirt the entire belt drive is reliably covered with a casing. The motor-cultivator is fitted with a cutter with a working diameter of 300 mm. The cutter consists of four template-shaped blades in each section. The blades are made of structural sheet steel. The spiral arrangement of the blades reduces vibration and ensures even load distribution on the gearbox. All metal surfaces, including the engine frame, cutter parts and depth gauge, are quality painted for corrosion protection and to extend their service life.

Engine type: Single-cylinder 4-stroke
Maximum power, hp: 3
Maximum crankshaft speed, rpm: 3600
Fuel type: Gasoline
Starting system: Manual start
Engine cooling system: Forced air cooling
Displacement, cm³: 78.5
Fuel consumption (maximum), l/h: 1.08
Fuel tank capacity, l: 1.6
Transmission: Chain reducer
Drive: V-belt transmission
Clutch type: Tension roller
Number of gears, forward/reverse: 1/0
Cultivation width, mm: 450
Cultivation depth, mm: 110
Dimensions of motor-cultivator (L/W/H), mm: 1350х600х650
Curb weight, kg: 28

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 177 active listings
  • Company
  • Registered for 1 week
  • Дніпро, Дніпропетровська область, Україна
Recently viewed
Kentavr Kentavr 1 week
Motoblock Kentavr MB2061D (wheels 4.00-10)
31,278 ₴
Motoblock Kentavr MB2061D (wheels 4.00-10)
Дніпро, Україна
Description of motoblock Kentavr MB2061D (wheels 4.00-10) The MB 2060D motoblock and its modification with an electric starter MB 2061D are the most popular of the “Kentavr” models equipped with a diesel engine. These are the basic models in the presented lineup. In construction they are very close to the MB 2070B model, also have a new safe normally open ty...
1 week Cultivators вул. Надії Алексєєнко, 70
31,278 ₴
Kentavr Kentavr 1 week
Motor-cultivator Kentavr MK40-1/6
13,153 ₴
Motor-cultivator Kentavr MK40-1/6
Дніпро, Україна
Description of the Kentavr MK40-1/6 motor-cultivator The Kentavr MK40-1/6 motor-cultivator is intended for cultivating, mixing soil with fertilizers, loosening, soil treatment with simultaneous weed destruction, and care of plantings on small and medium-sized garden and vegetable plots, on light and medium soils. Due to its small size it excellently cultivat...
1 week Cultivators вул. Надії Алексєєнко, 70
13,153 ₴
Kentavr Kentavr 1 week
Kentavr MB40-3 Motor-cultivator
13,515 ₴
Kentavr MB40-3 Motor-cultivator
Дніпро, Україна
Description of the Kentavr MB40-3 motor-cultivator. MB 40-3 — the most affordable by price, yet fully functional motor-cultivator with a 7 hp engine. It has the same V-belt drive as the MB 40-2, a ground tiller and a new air filter, only instead of two pneumatic wheels its kit includes a single support wheel. This is very convenient in use, especially if the...
1 week Cultivators вул. Надії Алексєєнко, 70
13,515 ₴
Call