Motocultivator Kentavr MK20-1/6

11,255 ₴

Cultivators

1 week

Україна

Дніпро Get directions →

вул. Надії Алексєєнко, 70

50 views

Published 1 week ago by Kentavr

11,255 ₴

In Cultivators category

вул. Надії Алексєєнко, 70, Дніпро, Україна

Get directions →

50 item views

Description of the Kentavr MK20-1/6 motor-cultivator The garden-plot motor-cultivator MK20-1/6 is a model in the "KENTAVR" line of motor-cultivators designed for quick and effective soil loosening on plots up to 0.05 ha (5 sotkas), as well as on beds, flowerbeds, in gardens and vineyards. The motor-cultivator is equipped with a 6-section tiller with a cultivation width of 450 mm or 650 mm, which allows soil to be loosened with maximum precision and neatness next to tree trunks, bushes or other plantings, as well as near fences, curbs, around posts, decorative park structures and rock gardens. A wide handlebar with soft ergonomic grips, a modern-design clutch lever, a convenient hand-throttle lever, an additional plastic transport wheel, protective fenders that cover the tillers across the full width — all this makes it unnecessary to apply significant physical force when working with this motor-cultivator, so its use will be comfortable and safe even for women and elderly people. Thanks to the power of the reliable 4-stroke petrol engine of 3.0 hp, the motor-cultivator is capable of properly loosening soil in one pass to a depth of up to 150 mm, even on rather compact soils or on soils that have not been previously cultivated. The petrol engine gives the motor-cultivator autonomy for fieldwork, has low weight, starts easily at low air temperatures, responds quickly to throttle control, and is simple and affordable to maintain and operate. The engine is equipped with an efficient air filter and a manual starter. The muffler is covered with a protective casing to avoid possible burns. The motor-cultivator drive is carried out by a V-belt transmission with an adjustable pressure roller. The tiller drive is carried out by a worm gearbox. The belt drive simultaneously serves as power transmission, clutch and a protection and safety element. If during operation the tiller suddenly jams on a stone or a stick, the belt drive will absorb the shock and prevent damage to the engine and gearbox. In addition, a belt-driven motor-cultivator is significantly lighter in weight and cheaper in price, and also simpler and more convenient to control and maintain than one with a gear drive. The driving and driven pulleys, as well as the pressure rollers, are metal, not plastic, and therefore have a long service life. The V-belt is segmented, with high traction characteristics. For safety and protection from dirt, the entire belt transmission is reliably covered with a casing. The motor-cultivator is fitted with a tiller with a working diameter of 300 mm. The tiller consists of four shovel-shaped blades in each section. The blades are made of structural sheet steel. The spiral arrangement of the blades reduces vibration and ensures uniform load on the gearbox. All metal surfaces, including the engine frame, tiller parts and depth gauge, are well painted for corrosion protection and to extend their service life.

Engine type: Single-cylinder 4-stroke
Maximum power, hp: 3
Maximum crankshaft speed, rpm: 3600
Fuel type: Petrol
Starting system: Manual start
Engine cooling system: Forced air cooling
Engine displacement, cm³: 78.5
Fuel consumption (maximum), l/h: 1.08
Fuel tank capacity, l: 1.6
Transmission: Chain gearbox
Drive: V-belt drive
Clutch type: Tension roller
Number of gears, forward/reverse: 1/0
Cultivation width, mm: 450, 650
Cultivation depth, mm: 110
Dimensions of the motor-cultivator (L/W/H), mm: 1350x600x650
Curb weight, kg: 31