Motocultivator Kentavr MK30-1/6T

10,667 ₴

Cultivators

1 week

Україна

Дніпро Get directions →

вул. Надії Алексєєнко, 70

59 views

Published 1 week ago by Kentavr

10,667 ₴

In Cultivators category

вул. Надії Алексєєнко, 70, Дніпро, Україна

Get directions →

59 item views

Description of the Kentavr MK30-1/6T motocultivator The garden-urban motocultivator MK30-1/6T is a new model in the "KENTAVR" line of motocultivators. It is designed for quick and effective loosening of soil on plots up to 30 sotkas, as well as on beds, flowerbeds, in gardens and vineyards. The motocultivator is equipped with a 6-section tiller with a cultivation width of 450 mm or 670 mm, which allows you to loosen the soil with maximum precision and neatness next to tree trunks, bushes or other plantings, as well as near fences, curbs, around posts, decorative park structures and rock gardens. A wide handlebar with soft ergonomic grips, a clutch lever of modern design, a convenient hand-throttle lever, an additional plastic transport wheel, protective fenders that cover the tillers across the entire width — all this makes it unnecessary to apply significant physical force when working with this motocultivator, so use will be comfortable and safe even for women and elderly people. Thanks to the power of the reliable 4-stroke gasoline engine, at 4.5 hp, the motocultivator is capable of quality soil loosening in one pass to a depth of up to 130 mm, even on fairly dense soils or on soils that have not been previously cultivated. The gasoline engine provides the motocultivator with autonomy for field work, has low weight, starts easily at low air temperatures, responds quickly to throttle control, and is simple and affordable in maintenance and operation. The engine is equipped with an efficient air filter and a manual starter. The muffler is covered with a protective casing to avoid possible burns. The drive of the motocultivator is carried out by a V-belt transmission with a controlled pressure roller. The tiller drive is carried out by a worm gearbox. The belt drive serves simultaneously as a power transmission, clutch and a protection and safety element. If during operation the tiller suddenly jams on a stone or stick, the belt drive will absorb the shock and prevent damage to the engine and gearbox. In addition, a motocultivator with a belt drive is significantly lighter in weight and cheaper in price, as well as simpler and more convenient to operate and maintain than one with a gear drive. The driving and driven pulleys, as well as the pressure rollers, are not plastic but metal, so they have a long service life. The V-belt is segmented, with high traction characteristics. For safety and protection from dirt, the entire belt drive is reliably covered with a casing. A tiller with a working diameter of 260 mm is installed on the motocultivator. The tiller consists of four template-shaped knives in each section. The knives are made of 3 mm thick structural sheet steel. The spiral arrangement of the knives reduces vibration and ensures even loading on the gearbox. All metal surfaces, including the engine frame, tiller parts and depth gauge, are quality painted for protection against corrosion and to extend their service life.

Engine type: Gasoline single-cylinder 4-stroke with air cooling
Maximum power, hp: 5
Maximum crankshaft speed, rpm: 3600
Cylinder capacity, cm3: 149
Number of gears forward/reverse: 1/0
Fuel type: Gasoline
Starting system: Manual starter
Engine cooling system: Forced air cooling
Fuel tank capacity, L: 1.8
Clutch type: V-belt with control and pressure roller
Cultivation width, mm: 400, 600
Cultivation depth, mm: 130
Tiller rotation speed, rpm: 120
Sets of cultivating knives: 6=(1+2)+(2+1)
Tiller rotor diameter, mm: 260
Transport wheel: Plastic
Overall dimensions of the motocultivator (LxWxH): 1460/450/910
Package size (LxWxH): 700х405х470
Operating weight, kg: 35