Potato planter for motor-tractor KS14 (with fertilizer hopper)

22,990 ₴
Seeders and seedlings
Yesterday 12:28
Україна
Дніпро Get directions →
вул. Тітова, 26
3 views
Published 17 hours ago by AGROZIP
22,990 ₴
вул. Тітова, 26, Дніпро, Україна
Get directions →
3 item views

Specially designed for simultaneous potato planting and incorporation of mineral nutrients into the soil, the potato planter for motor-tractor KS14 (with fertilizer hopper) has high operational qualities and is intended for large work volumes. It is attached to equipment with power of at least 10 horsepower; on motor-tractors it uses a semi-mounted fastening system, on walk-behind tractors it uses a special hitch.
This planter for a motor-tractor is equipped with capacious square hoppers made of sheet steel with a total volume of 120 L. Both hoppers are mounted on a metal frame and securely fixed on a transverse beam made of profile pipe with turnbuckles. Individual chain drives and two intermediate shafts, connected to each other by a special steel sleeve, are provided for each planting unit and fertilizer device. The inter-row distance is fixed at 60 cm.
The planting mechanisms with which the potato planter is equipped consist of a sturdy chain with baskets made of steel wire for tubers up to 60 mm in diameter. The chain conveyor is driven by the traction wheels — the intermediate shaft transmits the torque through the drive chain to the planting mechanism. The moving conveyor lifts the tuber onto the baskets and directs it through the chute into the furrow formed by the coulter; simultaneously with planting, a measured dose of mineral fertilizer is applied from the fertilizer device, after which the furrow is closed with soil.
To adjust the planting pitch to 20 and 25 cm, the potato planter for motor-tractor KS14 (with fertilizer hopper) has two interchangeable sprockets to which the drive chain is moved. Planting depth is set by changing the position of the coulter from 5 to 15 cm. The distance between hillers, height and tilt angle are adjusted by a special fastening system and by the presence of bearings in the disc closers. The maximum productivity of the unit is 0.2 ha/h.
Main advantages of the potato planter for motor-tractor KS14 (with fertilizer hopper):

All main adjustments available.
Two separate planting units.
Additional fertilizer hoppers.
Excellent productivity.

Aggregating vehicle: motor-tractor
Required power of aggregating vehicle, hp: from 10
Type of coulter: keel-shaped (anchor)
Bulb/tuber planting depth, mm: from 50 to 150
Number of rows planted simultaneously, pcs: 2
Weight, kg: 103.5
Maximum hopper capacity, L: 2 x 60

Read more

Published on 2026/10/11

Description

Specially designed for simultaneous potato planting and incorporation of mineral nutrients into the soil, the potato planter for motor-tractor KS14 (with fertilizer hopper) has high operational qualities and is intended for large work volumes. It is attached to equipment with power of at least 10 horsepower; on motor-tractors it uses a semi-mounted fastening system, on walk-behind tractors it uses a special hitch.
This planter for a motor-tractor is equipped with capacious square hoppers made of sheet steel with a total volume of 120 L. Both hoppers are mounted on a metal frame and securely fixed on a transverse beam made of profile pipe with turnbuckles. Individual chain drives and two intermediate shafts, connected to each other by a special steel sleeve, are provided for each planting unit and fertilizer device. The inter-row distance is fixed at 60 cm.
The planting mechanisms with which the potato planter is equipped consist of a sturdy chain with baskets made of steel wire for tubers up to 60 mm in diameter. The chain conveyor is driven by the traction wheels — the intermediate shaft transmits the torque through the drive chain to the planting mechanism. The moving conveyor lifts the tuber onto the baskets and directs it through the chute into the furrow formed by the coulter; simultaneously with planting, a measured dose of mineral fertilizer is applied from the fertilizer device, after which the furrow is closed with soil.
To adjust the planting pitch to 20 and 25 cm, the potato planter for motor-tractor KS14 (with fertilizer hopper) has two interchangeable sprockets to which the drive chain is moved. Planting depth is set by changing the position of the coulter from 5 to 15 cm. The distance between hillers, height and tilt angle are adjusted by a special fastening system and by the presence of bearings in the disc closers. The maximum productivity of the unit is 0.2 ha/h.
Main advantages of the potato planter for motor-tractor KS14 (with fertilizer hopper):

All main adjustments available.
Two separate planting units.
Additional fertilizer hoppers.
Excellent productivity.

Aggregating vehicle: motor-tractor
Required power of aggregating vehicle, hp: from 10
Type of coulter: keel-shaped (anchor)
Bulb/tuber planting depth, mm: from 50 to 150
Number of rows planted simultaneously, pcs: 2
Weight, kg: 103.5
Maximum hopper capacity, L: 2 x 60

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 438 active listings
  • Company
  • Registered for Yesterday
  • Дніпро, Дніпропетровська область, Україна
Recently viewed
AGROZIP AGROZIP Yesterday 12:28
Pro Seeders and seedlings Дніпро Yesterday 12:28
Two-row potato planter for mini tractor KSN-68 (3t)
11,500 ₴
Two-row potato planter for mini tractor KSN-68 (3t)
Дніпро, Україна
The productive maneuverable two-row potato planter for a mini tractor KSN-2T-68 is equipped with two working units and performs planting of tubers simultaneously in two rows with high productivity - up to 0.2 ha/h. The total hopper capacity is 68 L; selected tubers with a diameter up to 60 mm are used for planting.The two-row potato planter is intended for m...
Yesterday Seeders and seedlings вул. Тітова, 26
11,500 ₴
AGROZIP AGROZIP Yesterday 12:29
Pro Soil treatment Дніпро Yesterday 12:29
Mounted disc harrow for tractor Bomet 3.15 m
65,000 ₴
Mounted disc harrow for tractor Bomet 3.15 m
Дніпро, Україна
The mounted disc harrow for tractor Bomet 3.15 m has a strong frame made of profile tubes, reinforced with welded steel angles and braces. Four working sections are attached at the outer corner points - concave spherical discs with a sharply ground cutting edge, made of boron steel. Each section consists of seven discs arranged on an axle; the sections are f...
Yesterday Soil treatment вул. Тітова, 26
65,000 ₴
AGROZIP AGROZIP Yesterday 12:29
Pro Soil treatment Дніпро Yesterday 12:29
Subsoiler for mini tractor Bomet (4 shanks)
78,000 ₴
Subsoiler for mini tractor Bomet (4 shanks)
Дніпро, Україна
A powerful, productive subsoiler for mini tractor Bomet (4 shanks) is used to perform the final stage of field cultivation after harvest - loosening dried soils to a depth of up to 45 cm without disturbing the topsoil layer. It helps retain moisture and saturate the worked soils with oxygen. Very well suited for preparing soils for planting various fruit tre...
Yesterday Soil treatment вул. Тітова, 26
78,000 ₴
AGROZIP AGROZIP Yesterday 12:28
Pro Seeders and seedlings Дніпро Yesterday 12:28
Single-row potato planter for walk-behind tractor KS10
9,890 ₴
Single-row potato planter for walk-behind tractor KS10
Дніпро, Україна
The sturdy functional single-row potato planter for the KS10 walk-behind tractor is equipped with a durable metal hopper with increased capacity up to 60 L, allowing planting work for a fairly long time without refueling stops, reaching maximum productivity of 0.2 ha/h. It has a reinforced single-point hitch with a turnbuckle for power equipment with at leas...
Yesterday Seeders and seedlings вул. Тітова, 26
9,890 ₴
Call