Motoblock Kentavr MB2050D/M2 (wheels 4.00-8)
Description of the Kentavr MB2050D/M2 motoblock (wheels 4.00-8) The MB 2050D/M2 is a lightened version of one of the most popular Kentavr diesel motoblocks, model MB 2060D. It has the same design but is equipped with a 5.0 hp engine, a smaller and lighter gearbox, a tiller with a maximum working width of 840 mm and transport wheels 4.00-8. Due to its compactness and relatively low weight, it is more maneuverable in operation, easier and more comfortable to handle, especially in confined spaces, for example on garden beds or between trees. In addition, its price is significantly lower. It is an excellent choice for cultivating a small or medium-sized household garden plot.
Engine model: 173D
Fuel type: Diesel
Engine power, hp: 5.0
Engine displacement, cm³: 211
Rated speed, rpm: 3000
Rated fuel consumption, g/kW·h: 285
Fuel tank capacity, L: 2.5
Engine starting system: Manual starter
Air filter: Contact-oil type
Battery type, capacity A·h: -
Engine crankcase capacity, L: 0.75
Type of oil in engine crankcase: TM "DTZ" TURBO SYNT 10W-40 API CF-4/SG
Oil level sensor: None
Engine cooling system: Air cooling
Cooling system capacity, L: -
Type of coolant: -
Transmission drive type: Direct gear
Clutch type: Normally open multi-plate in oil bath
Drive belt type: -
Socket for connecting active implements: -
Gearbox type: Gear
Number of gears: 2/1
Reverse engagement method: Handle on the handlebars
Tiller drive: Direct with bevel gearbox
Power take-off shaft: Rear longitudinal with keyway Ø14, L=24
Oil volume in gearbox crankcase, L: 1.7
Type of oil in gearbox crankcase: TM "DTZ" TAD-17I API GL-
Transport wheels: 4.00-8
Wheel track, mm: 500
Nominal travel speed on wheels forward/reverse, km/h: 7.0; 9.8 / 5.1
Steering type and adjuster: Quick height and direction adjustment
Hitch type: Motoblock type
Method of tiller installation: Instead of transport wheels
Rated rotor speed of tiller, rpm: 93; 130 / 68
Number of tiller sections, pcs: 6=(2+1)×2
Tiller blade size/quantity/type: 5.5 mm × 235 mm / 24 pcs.
Tiller working width, mm: 580, 840
Tiller rotor diameter, mm: 350
Cultivation depth, mm: Up to 200
Electrical equipment: -
Published on 2026/10/11
Description of the Kentavr MB2050D/M2 motoblock (wheels 4.00-8) The MB 2050D/M2 is a lightened version of one of the most popular Kentavr diesel motoblocks, model MB 2060D. It has the same design but is equipped with a 5.0 hp engine, a smaller and lighter gearbox, a tiller with a maximum working width of 840 mm and transport wheels 4.00-8. Due to its compactness and relatively low weight, it is more maneuverable in operation, easier and more comfortable to handle, especially in confined spaces, for example on garden beds or between trees. In addition, its price is significantly lower. It is an excellent choice for cultivating a small or medium-sized household garden plot.
Engine model: 173D
Fuel type: Diesel
Engine power, hp: 5.0
Engine displacement, cm³: 211
Rated speed, rpm: 3000
Rated fuel consumption, g/kW·h: 285
Fuel tank capacity, L: 2.5
Engine starting system: Manual starter
Air filter: Contact-oil type
Battery type, capacity A·h: -
Engine crankcase capacity, L: 0.75
Type of oil in engine crankcase: TM "DTZ" TURBO SYNT 10W-40 API CF-4/SG
Oil level sensor: None
Engine cooling system: Air cooling
Cooling system capacity, L: -
Type of coolant: -
Transmission drive type: Direct gear
Clutch type: Normally open multi-plate in oil bath
Drive belt type: -
Socket for connecting active implements: -
Gearbox type: Gear
Number of gears: 2/1
Reverse engagement method: Handle on the handlebars
Tiller drive: Direct with bevel gearbox
Power take-off shaft: Rear longitudinal with keyway Ø14, L=24
Oil volume in gearbox crankcase, L: 1.7
Type of oil in gearbox crankcase: TM "DTZ" TAD-17I API GL-
Transport wheels: 4.00-8
Wheel track, mm: 500
Nominal travel speed on wheels forward/reverse, km/h: 7.0; 9.8 / 5.1
Steering type and adjuster: Quick height and direction adjustment
Hitch type: Motoblock type
Method of tiller installation: Instead of transport wheels
Rated rotor speed of tiller, rpm: 93; 130 / 68
Number of tiller sections, pcs: 6=(2+1)×2
Tiller blade size/quantity/type: 5.5 mm × 235 mm / 24 pcs.
Tiller working width, mm: 580, 840
Tiller rotor diameter, mm: 350
Cultivation depth, mm: Up to 200
Electrical equipment: -
Contact the seller
User is offline
- 171 active listings
- Company
- Registered for Yesterday
- Дніпро, Дніпропетровська область, Україна