Original Poltava KS1 kit for mechanized potato planting on a light walk-behind tractor

3,000 ₴
Seeders and seedlings
Yesterday 12:28
Україна
Дніпро Get directions →
вул. Тітова, 26
3 views
Published 17 hours ago by AGROZIP
3,000 ₴
вул. Тітова, 26, Дніпро, Україна
Get directions →
3 item views

The KS1 planting kit is designed to reduce the cost of planting potatoes and other garden crops on small household plots when working with light walk-behind tractors, where purchasing a full hopper potato planter is economically impractical or impossible given the lightness of the walk-behind tractor itself. The KS1 rotary planter is a pivot mechanism that on one side has a mount for installing a coulter, and on the opposite side — a mount for installing disc hillers. The KS1 potato hillers are suitable for connection to light walk-behind tractors of the Zirka-105 type with an air-cooled engine. The KS1 planting marker is intended for planting potatoes on pre-processed and prepared soils, with soil moisture not exceeding 30%.
Features of the KS1 planting kit construction
The attachment of the KS1 potato hiller to the walk-behind tractor is carried out using a hitch unit with a bushing (height 60 mm, inner Ø18.5 mm). The hitch unit is welded. There are spacer bolts for more reliable fixation. The frame of the planting kit is made of profile tubing 50 × 50 × 2 × 260. There is a handle-lock of the pivot mechanism with a spring. The rotation of the planting plow occurs 180 degrees perpendicular to the plane of movement of the walk-behind tractor. Bushings are provided for attaching the hillers using bolt fastenings. These bushings allow adjustment of the height position and working angle of the hillers. The hiller mounts are welded to the frame, therefore the possibility of adjusting the width between them is absent. The disc hillers are made of sheet steel 2 mm thick and have a diameter of 280 mm. Smooth and even operation is ensured by two installed 202 bearings. The share has a stand made of steel strip 10 × 50 × 400 mm, which has 6 holes with a diameter of 12.5 mm. These mounting holes provide the ability to adjust the height position of the coulter, which in turn is made of sheet steel 2 × 213 × 345 mm. There is also a bolt fastening — a turnbuckle for adjusting the attack angle of the coulter.
Operating principle of the KS1 potato hiller
A full planting cycle takes place in two passes:

on the first pass you cut the row using the coulter, after which it is necessary to manually place the potatoes in the row.

after that you turn the pivot mechanism to the position where the hillers are in the working position — down. Making a pass in the opposite direction, you cover the potato row with soil.

Standard configuration of the KS1 potato hiller:

pivot mechanism with hitch device – 1 pc.;

disc hillers Ø280 mm – 2 pcs.;

coulter – 1 pc.

Technical characteristics of the KS1 walk-behind tractor potato hiller

Walk-behind tractor version

Zirka-105; Zirka-135

Type

planting kit

Tractor class

walk-behind tractor

Number of rows

1

Row spacing

600 - 700 mm

Weight

12.3 kg

Aggregating vehicle: walk-behind tractor
Coulter type: keel-shaped (anchor)
Number of rows planted at once, pcs: 1
Depth of tuber planting, mm: up to 200
Weight, kg: 12.3
Required power of aggregating vehicle, hp: from 4
Manufacturer: Kryuchkov

Read more

Published on 2026/10/11

Description

The KS1 planting kit is designed to reduce the cost of planting potatoes and other garden crops on small household plots when working with light walk-behind tractors, where purchasing a full hopper potato planter is economically impractical or impossible given the lightness of the walk-behind tractor itself. The KS1 rotary planter is a pivot mechanism that on one side has a mount for installing a coulter, and on the opposite side — a mount for installing disc hillers. The KS1 potato hillers are suitable for connection to light walk-behind tractors of the Zirka-105 type with an air-cooled engine. The KS1 planting marker is intended for planting potatoes on pre-processed and prepared soils, with soil moisture not exceeding 30%.
Features of the KS1 planting kit construction
The attachment of the KS1 potato hiller to the walk-behind tractor is carried out using a hitch unit with a bushing (height 60 mm, inner Ø18.5 mm). The hitch unit is welded. There are spacer bolts for more reliable fixation. The frame of the planting kit is made of profile tubing 50 × 50 × 2 × 260. There is a handle-lock of the pivot mechanism with a spring. The rotation of the planting plow occurs 180 degrees perpendicular to the plane of movement of the walk-behind tractor. Bushings are provided for attaching the hillers using bolt fastenings. These bushings allow adjustment of the height position and working angle of the hillers. The hiller mounts are welded to the frame, therefore the possibility of adjusting the width between them is absent. The disc hillers are made of sheet steel 2 mm thick and have a diameter of 280 mm. Smooth and even operation is ensured by two installed 202 bearings. The share has a stand made of steel strip 10 × 50 × 400 mm, which has 6 holes with a diameter of 12.5 mm. These mounting holes provide the ability to adjust the height position of the coulter, which in turn is made of sheet steel 2 × 213 × 345 mm. There is also a bolt fastening — a turnbuckle for adjusting the attack angle of the coulter.
Operating principle of the KS1 potato hiller
A full planting cycle takes place in two passes:

on the first pass you cut the row using the coulter, after which it is necessary to manually place the potatoes in the row.

after that you turn the pivot mechanism to the position where the hillers are in the working position — down. Making a pass in the opposite direction, you cover the potato row with soil.

Standard configuration of the KS1 potato hiller:

pivot mechanism with hitch device – 1 pc.;

disc hillers Ø280 mm – 2 pcs.;

coulter – 1 pc.

Technical characteristics of the KS1 walk-behind tractor potato hiller

Walk-behind tractor version

Zirka-105; Zirka-135

Type

planting kit

Tractor class

walk-behind tractor

Number of rows

1

Row spacing

600 - 700 mm

Weight

12.3 kg

Aggregating vehicle: walk-behind tractor
Coulter type: keel-shaped (anchor)
Number of rows planted at once, pcs: 1
Depth of tuber planting, mm: up to 200
Weight, kg: 12.3
Required power of aggregating vehicle, hp: from 4
Manufacturer: Kryuchkov

    Attributes
Related listings in your area
How far is it? Show listings in my area
Show only listings that are km distanced Show listings

Contact the seller

User is offline
  • 438 active listings
  • Company
  • Registered for Yesterday
  • Дніпро, Дніпропетровська область, Україна
Recently viewed
AGROZIP AGROZIP Yesterday 12:28
Pro Seeders and seedlings Дніпро Yesterday 12:28
Two-row potato planter for mini tractor KSN-90 (3t) with fertilizer hopper
15,400 ₴
Two-row potato planter for mini tractor KSN-90 (3t) with fertilizer hopper
Дніпро, Україна
High-performance unit - two-row potato planter for tractor KSN-2T-90P is used for synchronous execution of two types of agricultural operations - planting seed potatoes and applying mineral fertilizers to the soil. It has two large receiving hoppers of 45 L each and two additional hoppers with a dosing device for granular or bulk fertilizers.The potato plant...
Yesterday Seeders and seedlings вул. Тітова, 26
15,400 ₴
AGROZIP AGROZIP Yesterday 12:29
Pro Soil treatment Дніпро Yesterday 12:29
Virax Earth Auger for Mini Tractor (Ukraine)
36,000 ₴
Virax Earth Auger for Mini Tractor (Ukraine)
Дніпро, Україна
Virax earth auger for mini tractor (Ukraine) - a specialized universal unit, actively used in agricultural and construction sectors - for drilling holes for posts and supports, for digging pits for planting fruit and ornamental trees, creating deep holes for installing various vertical structures (gazebos, fences, road signs, etc.). The Virax earth auger con...
Yesterday Soil treatment вул. Тітова, 26
36,000 ₴
Call